含损伤黏弹性阻尼加筋层合板声功率和指向性变异*

该文旨在研究损伤位置和程度对自由阻尼加筋层合板声辐射功率和指向性的影响。基于Mindlin和Timoshenko梁理论,建立了自由阻尼层合板-梁组合结构有限元模型。数值求解四边简支边界条件自由阻尼加筋层合板振动响应,继而通过Rayleigh积分计算加筋层合板辐射声功率和指向性。将计算得到的前4阶模态固有频率、声辐射功率与指向性与已有文献进行了对比基本一致,验证了数值模型的正确性。最后,详细讨论了损伤位置和程度对自由阻尼加筋层合板固有频率、振型、声辐射功率和指向性的影响,结果表明：随着结构损伤程度的增大,声辐射功率峰值向低频移动,在更多角度上出现明显的指向性;声辐射功率和指向性对损伤位置比损伤程度更加敏感。     

地铁车辆段咽喉区上盖建筑振动影响

城区地铁车辆段进行上盖物业开发可节约、集约利用地铁用地,缓解城市土地资源稀缺问题。地铁车辆段特别是其咽喉区振动是上盖物业开发的环境制约因素。为研究地铁车辆段咽喉区对上盖建筑的振动影响,建立轨道-地基土-上盖建筑三维有限元模型,采用等效荷载法,将实地采样的钢轨铅垂向振动加速度转化为列车钢轨铅垂向振动线荷载,作用于轨道上。在结合实测数据验证模型合理性的基础上,定量研究上盖平台厚度和离地高度、上盖建筑层数和结构等因素对室内环境振动(铅垂向Z振级VL_Zmax)的影响。结果表明,地铁车辆段咽喉区对高层建筑的振动影响整体大于多层建筑;由于振动波在屋顶自由端发生反射并与入射波叠加,导致不同楼层楼板中央VL_Zmax随楼层升高略有增加;框架结构建筑室内VL_Zmax大于剪力墙结构;增加上盖平台厚度可减小建筑室内VL_Zmax;上盖建筑室内VL_Zmax随上盖平台离地高度增加而增加(即随建筑楼层绝对离地高度增加而增大)。研究结果可为地铁车辆段上盖物业开发振动污染防治提供理论和工程技术依据。     

Polarity and steric effect of the lateral substituent on the mesophase behaviour of some newly prepared liquid crystals

Eight homologous series of 2- (or 3-) substituted phenyl 4?-(4?-alkoxy phenylazo) benzoates (In_a–h) were prepared in which, within each homologous series, the length of the terminal alkoxy group varies between 6, 8, 10 and 12 carbons, while the other substituent, X, is a laterally attached polar group that alternatively changed from CH₃, H, F, Br and CN. Compounds prepared were characterised by infrared and ¹H-NMR spectroscopy, and their mesophase behaviour investigated by differential scanning calorimetry and identified by polarised light microscopy. The results were discussed in terms of polarity and steric effects. The stability of the mesophase was correlated once with the dipolar anisotropy of the whole molecule and another with the dipolar anisotropy of the substituent, X. A comparative study was made between the investigated compounds and their previously prepared linear 4-substituted isomers, namely 4-substituted phenyl 4?-(4?-alkoxy phenylazo) benzoates (In_i–k).     

Ligandless-ultrasound-assisted emulsification microextraction followed by inductively coupled plasma-optical emission spectrometry for simultaneous determination of heavy metals in water samples

In this study, a simple and efficient method of ligandless-ultrasound-assisted emulsification microextraction (LL-USAEME) followed by inductively coupled plasma-optical emission spectrometry (ICP-OES) has been developed for simultaneous extraction, preconcentration and determination of manganese, cadmium, cobalt and nickel in water samples. In the proposed approach, tetrachloroethylene was selected as extraction solvent. The effect of important experimental factors such as volume of extraction solvent, pH, sonication time, salt concentration, and temperature was investigated by using a fractional factorial design (2^5?1) to identify important factors and their interactions. In the next step, a Box-Behnken design (BBD) was applied for optimisation of significant factors. The obtained optimal conditions were: 30?µL for extraction solvent, 12 for pH, 5?min for sonication time, and 5% w/v for salt concentration. The limits of detections (LODs) for Cd(II), Co(II), Mn(II) and Ni(II) were 0.20, 0.13, 0.21 and 0.28?µg?L^?1, respectively. Relative standard deviations (RSD, C?=?200.0?µg?L^?1, n?=?9) were between 3.4–7.5% and the calibration graphs were linear in the range of 0.25 to 1000.0?µg?L^?1 for Mn, 0.5–1000.0?µg?L^?1 for Co and Ni and 1.0–250.0?µg?L^?1 for Cd. The determination coefficients (R ²) of the calibration curves for the analytes were in the range of 0.993 to 0.999. The proposed method was validated by using two certified reference materials, and also the method was applied successfully for the determination of heavy metals in different real water samples.     

3,4-Dinitrobenzamide Functionalized CdTe/ZnTe Quantum Dots as a Nanoprobe for Imaging Glutathione S-Transferase in Living Cells

A novel fluorescent nanoprobe for glutathione S‐transferase (GST) has been developed by incorporating 3,4‐dinitrobenzamide (a specific substrate of GST) onto CdTe/ZnTe quantum dots. The probe itself displays a low background signal due to the strong quenching effect of the electron‐withdrawing unit of 3,4‐dinitrobenzamide on the quantum dots. However, GST can efficiently catalyze the nucleophilic substitution of reduced glutathione on the p‐nitro group of the nanoprobe, leading to a large fluorescence enhancement. Most notably, this enhancement shows high selectivity and sensitivity towards GST instead of the other biological substances. With this nanoprobe, a simple fluorescence imaging method for intracellular GST has been established, and its applicability has been successfully demonstrated for imaging GST in different living cells, which reveals that A549 cells express GST about 3 times higher than NIH‐3T3 and Hela cells.     

The Effect of Oxygen on Conversion in the Organic Peroxide-initiated High-Pressure Polymerization of Ethylene

To initiate the high-pressure polymerization of ethylene, oxygen is used together with organic peroxides in a number of tubular reactor processes. Since molecular oxygen is capable of promoting or inhibiting radical polymerization, depending on the reaction conditions chosen, controlled experiments were carried out to clarify these aspects of high pressure ethylene polymerization. In continuous polymerization tests carried out at 1700 bar and temperatures between 110 and 320°C, conversions were determined with tert-amyl perneodecanoate and di-tert-butyl peroxide initiation in the presence of various quantities of oxygen. Batch tests using a photo-initiator together with oxygen were also carried out. A comparison with polymerizations under conditions of careful elimination of oxygen shows no effect on the peroxide-initiated polymerization up to temperatures of 160 to 170°C. Although oxygen is an initiator at higher temperatures, the conversions obtained from the simultaneous addition of controlled quantities of oxygen and organic peroxides is lower than that obtained by adding together the conversions from the separate polymerizations.     

羧酸类金属有机框架材料的合成及应用

金属-有机框架材料(Metal-Organic?Frameworks,简称MOFs)是由金属离子（簇）与有机桥接配体通过配位共价键或弱相互作用自组装形成的一类具有分子内孔隙的有机-无机杂化材料。羧酸类MOFs材料中金属中心和有机羧酸配体的可变性导致了其结构和功能的多样性,在气体的吸附与分离、荧光、传感、药物传输以及电催化等多个领域展现了独特的应用前景,并被认为是当今科学上最有前途的材料之一。对于有机配体的选择,从早期易坍塌的含氮杂环类配体过渡到了如今稳定性好的羧酸类配体,解决了不少以前出现的MOFs材料结构单一易坍塌问题。     

羧酸配体取代基对席夫碱型双核镝(Ⅲ)配合物结构和磁性的影响

以N-(2-羟基-3-甲氧基亚苄基)氨基脲(H2hms)与不同取代基的羧酸(RCOOH)为配体,合成了3例席夫碱类的中心对称双核镝基配合物[Dy₂(Hhms)₂(C(CH₃)₃COO)₂(H₂O)₄](NO₃)₂(1)、[Dy₂(Hhms)₂(C₁₄H₉COO)₂(C₂H₅OH)₂(CH₃OH)₂][ZnCl₄](2)和[Dy₂(Hhms)₂(C₆H₃(NH₂)₂COO)₂Cl₂]·2CH₃CN(3),并对其进行了结构和磁性表征。结构分析表明,配合物1和2保持了相似的单帽四方反棱柱配位构型,但1与2中羧酸与Dy(Ⅲ)键合的方式不同;配合物2和3保持了相似的酚氧和羧酸桥联结构,但由于配位小分子的不同,配合物3中Dy(Ⅲ)离子的配位几何构型与2有所不同。磁性测试结果表明,配合物3在零场下观察到显著的单分子磁体行为,具有磁翻转有效能垒96 K。相反,配合物1仅表现了快的量子隧穿弛豫行为,甚至配合物2没有单分子磁体的弛豫信号。借助结构特点和各向异性轴取向等关键信息,对3例配合物的磁构效关系进行了讨论。研究结果表明利用羧酸配体取代基能够实现对分子磁各向异性以及对称性的良好调控,从而提高镧系单分子磁体磁弛豫行为。