不同加载速率下砂岩弯曲破坏的细观机理

岩石细观破裂形貌是岩石破坏机制的重要反映，为研究不同加载速率对砂岩弯曲破坏的影响，通过三点弯曲实验和扫描电镜方法，对某煤矿关键层砂岩弯曲破断裂纹细观形态以及裂纹的自相似性进行了研究。选取6个不同加载速率对岩样进行三点弯曲实验，观察其宏观断裂情况，并利用扫描电镜对弯曲断裂面表面裂纹细观结构进行观察，并拍摄不同倍数下的扫描电镜图片。对图片进行图像处理后得到砂岩弯曲断裂破坏细观裂纹信息，并计算得到微裂纹的分形盒维数值。结果显示:随着加载速率的提高，砂岩穿晶断裂的比例也随之升高，裂纹分形维数亦随着加载速率的增大而增加，同时，分形维数还与弯曲断裂破坏荷载和抗弯强度成正比。可见，加载速率对断裂方式有一定的影响，且加载速率越大断裂所需的破坏能越大，裂纹分布越广，表明开采速度与岩爆等岩体动力灾变有密切关系。     

岩石类介质侵彻效应的理论研究进展

近年来，随着超高速武器的发展，侵彻效应的研究重点逐渐由高速向超高速发展。随着弹体打击速度提高，侵彻机制发生变化，并触发强烈的成坑和地冲击效应。本文综述了大速度范围内岩石类介质侵彻效应的理论研究进展，讨论了长杆弹侵彻速度的分区，介绍了岩石类介质的侵彻、成坑、地冲击效应的理论模型，并对目前研究中尚有待解决的问题和下一步的研究方向进行了展望。     

泥质盐岩单轴蠕变寿命研究

岩石流变力学的研究中，蠕变寿命是一个重要问题.由于长期蠕变试验资料的缺乏，难以估计蠕变破坏时间.该文进行了泥质盐岩单轴全应力 应变压缩试验，并采用陈氏加载法进行了单轴蠕变试验.对蠕变曲线进行了处理，获得了不同应力水平下的蠕变曲线簇，进而得到了等时应力-应变曲线簇.通过拟合分析，建立了等时应力-应变曲线割线模量随时间变化关系模型和等时应力 应变曲线的数学模型.对等时应力 应变曲线与全应力-应变曲线之间的关系进行了分析，获得了蠕变破坏强度和破坏应变分别与蠕变寿命之间的数学表达式.该文研究成果可以估计泥质盐岩的蠕变寿命、长期强度、长期模量、蠕变破坏线和蠕变终止线，对相关岩石流变寿命的估计具有借鉴意义.     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

基于持续同调的边坡土颗粒应力链失稳分析

采用颗粒离散元方法和持续同调理论,研究了内排土场堆叠至不同高度时的边坡稳定性。为便于研究,现采用一水平金属板向下施加压力,代替不同厚度土层的重力荷载,对边坡在竖向荷载作用下的失稳破坏过程进行了颗粒离散元模拟。研究了二维边坡土颗粒速度总矢量、边坡失稳破坏时滑移开裂面的角度以及边坡坡顶y方向的平均速度等宏观响应过程,并构建了自然堆积下边坡堆积体颗粒的法向力链无向网络模型。最后,用持续同调方法对边坡坡顶颗粒接触力链网络的拓扑特征进行分析,获得条码图,建立了岩体结构持续同调特征与失稳演化的关系。本文为研究边坡失稳拓扑识别提供了一种新方法,从而可以有效预测边坡的失稳破坏。     

Real-time accurate Free-Form Deformation in terms of triangular Bezier surfaces

We implemented accurate FFD in terms of triangular Bezier surfaces as matrix multiplications in CUDA and rendered them via OpenGL. Experimental results show that the proposed algorithm is more efficient than the previous GPU acceleration algorithm and tessel- lation shader algorithms.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

In view of the continuously worsening environmental problems, fossil fuels will not be able to support the development of human life in the future. Hence, it is of great importance to work on the efficient utilization of cleaner energy resources. In this case, cheap, reliable, and eco-friendly grid-scale energy storage systems can play a key role in optimizing our energy usage. When compared with lithium-ion and lead-acid batteries, the excellent safety, environmental benignity, and low toxicity of aqueous Zn-based batteries make them competitive in the context of large-scale energy storage. Among the various Zn-based batteries, due to a high open-circuit voltage and excellent rate performance, Zn-Ni batteries have great potential in practical applications. Nevertheless, the intrinsic obstacles associated with the use of Zn anodes in alkaline electrolytes, such as dendrite, shape change, passivation, and corrosion, limit their commercial application. Hence, we have focused our current efforts on inhibiting the corrosion and dissolution of Zn species. Based on a previous study from our research group, the failure of the Zn-Ni battery was caused by the shape change of the Zn anode, which stemmed from the dissolution of Zn and uneven current distribution on the anode. Therefore, for the current study, we selected K₃[Fe(CN)₆] as an electrolyte additive that would help minimize the corrosion and dissolution of the Zn anode. In the alkaline electrolyte, [Fe(CN)₆]^3– was reduced to [Fe(CN)₆]^4– by the metallic Zn present in the Zn-Ni battery. Owing to its low solubility in the electrolyte, K₄[Fe(CN)₆] adhered to the active Zn anode, thereby inhibiting the aggregation and corrosion of Zn. Ultimately, the shape change of the anode was effectively eliminated, which improved the cycling life of the Zn-Ni battery by more than three times (i.e., from 124 cycles to more than 423 cycles). As for capacity retention, the Zn-Ni battery with the pristine electrolyte only exhibited 40% capacity retention after 85 cycles, while the Zn-Ni battery with the modified electrolyte (i.e., containing K₃[Fe(CN)₆]) showed 72% capacity retention. Moreover, unlike conventional organic additives that increase electrode polarization, the addition of K₃[Fe(CN)₆] not only significantly reduced the charge-transfer resistance in a simplified three-electrode system, but also improved the discharge capacity and rate performance of the Zn-Ni battery. Importantly, considering that this strategy was easy to achieve and minimized additional costs, K₃[Fe(CN)₆], as an electrolyte additive with almost no negative effect, has tremendous potential in commercial Zn-Ni batteries.     

考虑破坏时复合材料结构的分析

本文考虑复合材料结构发生局部破坏时的分析问题,这是一个非线性问题。本文引入带步长限制的变步长增量载荷方案作为解决这一问题的工程途径。用有限元法作为结构分析的基本手段。经试验结果对比,初步表明该方案是可行的。     

干燥和水饱和花岗岩的动态断裂特性

利用霍布金森压杆实验研究了干燥和水饱和花岗岩试件的动态应力应变关系。实验得到了干燥和水饱和花岗岩试件的平均动态拉断强度，表明水饱和花岗岩试件和干燥花岗岩试件的抗拉强度与加载速率具有不同的关系。对实验中实测试件层裂片的厚度进行了计算分析，对岩石类介质的动态断裂准则提出了初步见解。     

岩石（煤）的碎胀与压实特性研究

本文通过自行设计的一套岩石（煤）的松散和压实试验方案及相应的实验设备，对兖州矿区岩（煤）样进行了较为系统的碎胀与压实特性研究，测定了岩石（煤）的碎胀系数、碎胀曲线、压实曲线和侧压曲线．