关于重核位能曲面(液滴部分)的研究

本文选用一套适宜的表面参数化方法,推导了包括曲率能在内的重核变形能公式,计算了²³⁵U,²⁵²Fm等重核的位能曲面和裂变位垒高度。     

重离子熔合势垒的动力学模型研究

在改进的量子分子动力学模型基础上系统地研究了超重核合成中的入射道静态势和动力学势.从入射道静态势给出了质量不对称度与静态势垒高度以及质量不对称度与接触点驱动势的关系.动力学势垒高度是能量依赖的,随着入射能量的增加而增加,最终趋近于密度冻结势垒高度;动力学势垒高度随着入射能量的降低而降低,它的最低值接近于绝热势垒高度.在冷熔合反应中,动力学势垒的最低值所对应的入射能量可能是合成超重元素最佳入射能的选择     

布朗马达的定向输运模型

将系统利用非平衡涨落能量做功，看作是布朗马达受到内外噪声作用的结果，并建立相应的含阻尼、双噪声的扩散模型．通过解析计算和数值模拟，在一维惯性锯齿势中，阐明了乘性噪声驱动布朗马达定向运动的机理，分析了黏滞阻力对定态流的影响．作为应用，解释了单个马达蛋白梯跳运动的实验现象． 关键词：     

与温度有关的核子光学势及平均自由程

本文运用有效的Skyrme相互作用在核物质和有限核中研究了核子在各种温度时的光学势及平均自由程.虽然由于零程Skyrme相互作用的局限性和Skyrme相互作用及核密度与核温度无关的假定,但计算结果在核温度T≤8MeV,能量从－30到60MeV范围内还是合理的.     

核裂变中的Overshooting现象与中子多重性

本文采用扩散模型来讨论核裂变中的瞬态过程。研究结果表明在Kramers区域(T/E_f<1)和高温区域(T/E_f>1)瞬态过程的行为差别很大。高温区域瞬态过程中的Overshooting现象会使裂变几率增大,从而使通常认为的裂变速率的瞬态行为引起中子多重性增强效应在这一区域减弱甚至消失。     

熔合反应中动力学势垒的研究

用改进的量子分子动力学模型研究了与入射能量相关的重离子熔合势垒. 随着 入射能的降低可以观察到动力学势垒的最低值, 这个最低动力学势垒与绝热势垒 非常接近；动力学势垒随着入射能的增加而升高, 最终接近于静态势垒(非绝热势垒). 基于动力学势垒的研究, 对于重离子熔合反应的额外推动(extra-push)给出了微观理解,对势垒贯穿给出了一种新的解释. 为进一步理解动力学势垒, 还研究了颈部的形成和体系的动力学形变, 分析了动力学势垒降低的原因.     

40, 48Ca+90, 96Zr近垒熔合反应的动力学研究

发展了一种改进的量子分子动力学模型,并用这一模型研究了40,48Ca+90,96Zr的近垒熔合反应.改进的量子分子动力学模型能很好地描述一系列核,从6Li到208Pb,的基态性质及它们的时间演化.在相同参数下计算得到的40Ca+90Zr以及40Ca+96Zr这两个熔合反应的激发函数与实验结果都符合得相当好.在分析丰中子核熔合截面增强机制中,发现丰中子核熔合反应初始阶段颈部的N/Z值明显偏大,促使反应中动态位垒降低,从而引起了丰中子核反应熔合截面的增强. An improved Quantum Molecular Dynamics (QMD) model is proposed and the fusion reactions 40, 48Ca+90, 96Zr are studied by using this model. With our improved QMD model, the ground state properties and their time evolution of nuclei from 6Li to 208Pb can be reproduced reasonably well and the excitation functions of fusion cross section for reactions40Ca+96Zr and 40Ca+96Zr at near barrier can be reproduced remarkably well with the same set of parameters...     

n+233U裂变碎片质量分布的唯象模型研究

本模型基于裂变多通道无规颈断裂模型,考虑宏观液滴能、壳效应能以及壳效应与温度的关系,得到参数化的势能表示形式。通过拟合不同测量方法得到的实验数据(经过评价) 获得3 组模型参数。3 组参数计算的碎片质量分布均很好地再现了不同能点的实验数据,除了基于动能法实验数据得到的参数外,其14 MeV的计算结果与实验数据符合较差。研究发现,不同入射中子能量的裂变碎片质量分布有4 个主要交叉点,在叉点之上的产额随入射中子能量增加减少,之下的产额则随入射中子能量上升;内侧(或外侧) 的两个交叉点质量数之和近似等于裂变复合核的质量数;不同裂变系统的重峰左侧的交叉点都保持在132 附近。Present model was based upon Brosa model, where macro energy,shell effect energy and its decreasing with system temperature were considered and parameterized. 3 sets of model parameters were obtained by fitting to 3 groups of evaluated experimental data, respectively, where the groups were classified by measured method: radiochemistry (RA) method, double kinetic energy (KE) method, and both (ALL). All the 3 sets of parameters could well reproduce themeasured mass distributions on different energies, except the KE set on 14 MeV. The result shows the mass distributions mainly had 4 trend turning points, above which the yield decreasing and below which the yield increasing with energy.The sum of the 1st and 4th (or 2nd and 3rd) point positions was equal to the compound nuclei mass approximately. And the 3rd point was kept at ~132 constantly for different fission systems n+233 U, n+235U, n+233Pu.     

Neutron Skin Thickness of Nuclei and Effective Nucleon-Nucleon Interactions

The Skyrme energy density functional is applied to study the ground state properties of a series of finite nuclei. The charge rms radii, neutron rms radii, and the neutron skin thickness for some nuclei are calculated and compared with the experimental data. The constraint on the effective interactions, especially, the density dependence of the isospin-dependent. part of Skyrme interactions is extracted by the data of neutron skin thicknesses of ^208Pb and isotopes of Sn.     

Dynamical Effects on Sub-barrier Fusion of ^40,48Ca＋^90,96Zr

We have measured the fusion cross sections for ^48Ca＋^90,96Zr around the Coulomb barrier and presented them along with the experimental data of ^40Ca＋^90,96Zr. The experimental results are compared with the improved quantum molecular dynamics model calculations. It is shown in comparison that the dynamical effects play an important role in the sub-barrier fusion reaction