Highly Efficient Simplified Organic Light-Emitting Diodes Utilizing F4-TCNQ as an Anode Buffer Layer

We demonstrate that the electroluminescent performances of organic light-emitting diodes （OLEDs） are significantly improved by evaporating a thin F4-TCNQ film as an anode buffer layer on the ITO anode. The optimum Alq3-based OLEDs with F4-TCNQ buffer layer exhibit a lower turn-on voltage of 2.6 V, a higher brightness of 39820cd/m^2 at 13 V, and a higher current efficiency of 5.96cd/A at 6 V, which are obviously superior to those of the conventional device （turn-on voltage of 4.1 V, brightness of 18230cd/m^2 at 13 V, and maximum current efficiency of 2.74calla at 10 V）. Furthermore, the buffered devices with F4-TCNQ as the buffer layer could not only increase the efficiency but also simplify the fabrication process compared with the p-doped devices in which F4-TCNQ is doped into β-NPB as p-HTL （3.11 cd/A at 7 V）. The reason why the current efficiency of the p-doped devices is lower than that of the buffered devices is analyzed based on the concept of doping, the measurement of absorption and photoluminescence spectra of the organic materials, and the current density-voltage characteristics of the corresponding hole-only devices.     

利用复合色彩转换膜实现白色有机电致发光

利用蓝色有机发光二极管激发荧光色彩转换膜的方法,制备了一种新型的白色有机电致发光器件.蓝色有机发光二极管的发光层采用在4,4′-Bis(carbazol-9-yl)biphenyl(CBP)主体中掺杂高效蓝色荧光染料N-(4-((E)-2-(6-((E)-4-(diphenylamino)styryl)naphthalen-2-yl)vinyl)phenyl)-N-phenylbenzenamine(N-BDAVBi)来制备.有机/无机复合色彩转换膜是将有机荧光颜料VQ-D25和无机荧光粉钇铝石榴石(YAG)按一定的重量比均匀分散到-[CH3CH2COOCH3]n-(PMMA)中经涂敷、固化而成.通过与单纯有机或无机色彩转换膜的比较及调整复合转换膜本身的厚度和荧光颜料的掺杂比例来优化白光器件的发光光谱,获得了色稳定性较高的白色有机电致发光器件.当驱动电压由6V升至14V时,器件的色坐标仅在(0.354,0.304)和(0.357,0.312)之间变化,其最高电流效率约为5.8cd/A(4.35mA/cm2),最高亮度为16800cd/m2(14V).     

Improved performance of organic light-emitting diodes with dual electron transporting layers

In this study the performance of organic light-emitting diodes(OLEDs) are enhanced significantly,which is based on dual electron transporting layers(Bphen/CuPc).By adjusting the thicknesses of Bphen and CuPc,the maximal luminescence,the maximal current efficiency,and the maximal power efficiency of the device reach 17570 cd/m2 at 11 V,and 5.39 cd/A and 3.39 lm/W at 3.37 mA/cm2 respectively,which are enhanced approximately by 33.4%,39.3%,and 68.9%,respectively,compared with those of the device using Bphen only for an electron transporting layer.These results may provide some valuable references for improving the electron injection and the transportation of OLED.     

Tandem white organic light-emitting diodes adopting a C60：rubrene charge generation layerTandem white organic light-emitting diodes adopting a C60：rubrene charge generation layer

Organic bulk heterojunction fullerence （C60） doped 5, 6, 11, 12-tetraphenylnaphthacene （rubrene） as the high quality charge generation layer （CGL） with high transparency and superior charge generating capability for tandem organic light emitting diodes （OLEDs） is developed. This CGL shows excellent optical transparency about 90%, which can reduce the optical interference effect formed in tandem OLEDs. There is a stable white light emission including 468 nm and 500 nm peaks from the blue emitting layer and 620 nm peak from the red emitting layer in tandem white OLEDs. A high efficiency of about 17.4 cd/A and CIE coordinates of （0.40, 0.35） at 100 cd/m2 and （0.36, 0.34） at 1000 cd/m2 have been demonstrated by employing the developed CGL, respectively.     

White Organic Light-Emitting Devices Based on 2-（2-Hydroxyphenyl） Benzothiazole and Its Chelate Metal Complex

We present three kinds of organic light-emitting devices (OLED) fabricated to achieve the emission of bright and pure white light. Device A, with a double-layered structure using 2-(2-hydroxyphenyl) benzothiazole (HBT) and poly (N-vinylcarbazole) (PVK) as the emitting layer (EML) and the hole transport layer (HTL) respectively, could realize the blue-green light emission. Bis-(2-(2-hydroxyphenyl) benzothiazole)zinc (Zn(BTZ)2), synthesized with zinc acetate dihydrate and HBT to form a complex, is used as main EMLs in a similar structure to fabricate devices B and C. Bright and pure white light emissions can be obtained from device C which was fabricated with a green-white emitting host Zn(BTZ)2 and red dopant 5,6,11,12-tetraphenylnaphthacene (rubrene). The maximum quantum efficiency of device C could reach 0.63%, and the corresponding brightness and CIE coordinates were 4000cd/m^2 and (x=0.341, y=0.334) at the driving voltage of 20V.     

国内第三产业产值的ARMAV模型研究与应用

本文利用时序分析方法研究 1 95 2— 1 995年国内生产第三产业交通运输仓储邮电通信业与批发和零售贸易餐饮业产值的 ARMAV模型 ,并用所建模型对 1 996— 1 997年产值进行外延预测 ,得到较理想的预测结果     

错配杂交化学发光法检测细胞色素P4501A1基因多态性

建立一种检测细胞色素P4501A1基因多态性的新方法。针对每个多态位点设计两根寡核苷酸探针，两根探针的区别仅在于突变位点处一个碱基。每个样品分别与两根探针进行杂交，采用化学发光法检测杂交体，通过两根探针的杂交信号强度之比确定基因型。与参考方法比较，该法具有快速、简便、费用低廉等优点。     

Tandem white organic light-emitting diodes adopting a C60：rubrene charge generation layer

Organic bulk heterojunction fullerence(C60) doped 5, 6, 11, 12-tetraphenylnaphthacene(rubrene) as the high quality charge generation layer(CGL) with high transparency and superior charge generating capability for tandem organic light emitting diodes(OLEDs) is developed. This CGL shows excellent optical transparency about 90%, which can reduce the optical interference effect formed in tandem OLEDs. There is a stable white light emission including 468 nm and 500 nm peaks from the blue emitting layer and 620 nm peak from the red emitting layer in tandem white OLEDs. A high efficiency of about 17.4 cd/A and CIE coordinates of(0.40, 0.35) at 100 cd/m2 and(0.36, 0.34) at 1000 cd/m2 have been demonstrated by employing the developed CGL, respectively.     

Improving efficiency of organic light-emitting devices by optimizing the LiF interlayer in the hole transport layer

The efficiency of organic light-emitting devices (OLEDs) based on N,N'-bis(1-naphthyl)-N,N'-diphenyl-N,1'-biphenyl-4,4'-diamine (NPB) (the hole transport layer) and tris(8-hydroxyquinoline) aluminum (Alq₃) (both emission and electron transport layers) is improved remarkably by inserting a LiF interlayer into the hole transport layer. This thin LiF interlayer can effectively influence electrical performance and significantly improve the current efficiency of the device. A device with an optimum LiF layer thickness at the optimum position in NPB exhibits a maximum current efficiency of 5.96 cd/A at 215.79 mA/cm², which is about 86% higher than that of an ordinary device (without a LiF interlayer, 3.2 cd/A). An explanation can be put forward that LiF in the NPB layer can block holes and balance the recombination of holes and electrons. The results may provide some valuable references for improving OLED current efficiency.     

5-酰胺基-1H-咪唑并[5,4-b]吡啶类衍生物的合成及其血管紧张素Ⅱ受体拮抗活性研究

在对已上市及正在临床研究阶段的非肽类血管紧张素(A)受体拮抗剂的结构参数和定量构效关系研究的基础上,应用计算机辅助药物设计、生物电子等排及结构拼合等药物设计方法,设计并合成了16个结构全新的5-酰胺基-1H-咪唑并[5,4-b]吡啶类衍生物,其结构经过IR,¹HNMR和MS确证.初步生物活性研究结果表明,部分目标化合物对A引起的兔胸主动脉环收缩反应具有显著的拮抗活性.构效关系分析提示,5-酰胺基-1H-咪唑并[5,4-b]吡啶类衍生物具有良好的A受体拮抗活性,N-苯基-1H-吡咯四氮唑基团可作为新型A受体拮抗剂设计的侧链替代结构.