Quality assurance system for a decomposition method as demonstrated for the Wickbold combustion technique

 A five-step model for a quality assurance system is developed for an internal quality control check. It includes the quality control of the decomposition method and the detection method as steps belonging together. The Wickbold combustion technique as decomposition method in combination with atomic absorption spectrometry was chosen. The vaporization of the elements mercury, arsenic, lead, antimony and selenium is based on combustion in an oxyhydrogen flame. To check the efficiency of the analytical system, the uncertainty of results was calculated on the basis of the "Guide to the Expression of Uncertainty in Measurement". Received: 13 January 1997 · Accepted: 29 March 1997     

SYNTHESIS AND PROPERTIES OF POLYSTYRENE／LAPONITE NANOCOMPOSITES

Exfoliated polystyrene (PS)/laponite nanocomposites were prepared successfully. The characteristic doo1 diffraction peak of organo-laponite disappeared in the XRD patterns of nanocomposites, indicating that the laponite layers were exfoliated and the ordered crystal structure of laponite was destroyed because of the styrene polymerization. TEM observations showed that the exfoliated laponite primary particles were dispersed randomly in the PS matrix with lateral dimensions from 1 nm to 10 rim. SEM results showed that the PS/laponite nanocomposite particles were almost monodispersed spheres with the size of about 120 rim. Because of the interaction between PS and laponite nanolayers, the nanocomposites exhibited higher thermal stability and glass transition temperature when compared to pure PS.     

IMEP in support of the comparability of measurement results across the Romanian chemical metrology infrastructure

On the basis of quantitative chemical measurements many important decisions are made in support of legislation or in industrial processes or social aspects. For this reason it is important to improve the quality of chemical measurement results and thus make them comparable and acceptable everywhere. The measurement quality is important to enable an equivalent implementation of the European Union regulations and directives across an enlarged EU. In this context, the European Commission–Joint Research Centre–Institute for Reference Materials and Measurement (EC-JRC-IRMM) set up a programme to improve the scientific basis for metrology in chemistry (MiC) in EU candidate countries in the framework of EU enlargement. Several activities were initiated, such as training, fellowships, sponsoring of seminars, conferences and participation in interlaboratory comparisons. To disseminate measurement traceability, IRMM provides through its International Measurement Evaluation Programme (IMEP) an interlaboratory tool to enable the benchmarking of laboratory performance. IMEP emphasizes the metrological aspects of measurement results, such as traceability and measurement uncertainty. In this way it has become a publicly available European tool for MiC. The Romanian Bureau of Legal Metrology – National Institute of Metrology (BRML-INM) actively supports the participation of Romanian authorized and field laboratories in IMEP interlaboratory comparisons. This paper describes the interest of Romanian laboratories participating in this programme, the analytical and metrological problems that became relevant during these exercises and some actions for improvement. The results from Romanian laboratories participating in IMEP-12 (water), IMEP-16 (wine), IMEP-17 (human serum) and IMEP-20 (tuna fish) are presented. To conclude, the educational and training activities at national level organized jointly by the Romanian National Institute of Metrology (INM) and IRMM are also mentioned.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

SYNTHESIS OF CROSS-CONJUGATED （p-PHENYLENE）S-POLY（p- PHENYLENEVINYLENE）S HYBRIDS WITH LOW CONTENT OF STRUCTURAL DEFECTS

The novel shish-kebab-type liquid crystalline cross-conjugated （p-phenylene）s-poly（p-phenylenevinylene）s hybrid was synthesized through Gilch polymerization. Their structures and properties were characterized by NMR, GPC, DSC, X-ray diffraction and polarizing optical microscope （POM）. ^1H-NMR investigation of the polymers indicates that the shish-kebab-structure has a strong ability to suppress the structural defects in the polymers. The polymers are enantiotropic liquid crystals. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The mesophase was identified by X-ray diffraction method. They showed not only a smectic LC phase, but also a strong green fluorescence in chloroform. The maximum absorption band of the ＂kebabs＂ of the two, 5-bis（4＇- alkoxyphenyl）benzene at 280 nm did not appear in absorption spectra of the polymers. The same phenomena were also observed in the fluorescence spectra. These results imply that the polymers have formed a cross-conjugated uniform structure and achieved an extended n-conjugation polymer.     

A MORPHOLOGICAL STUDY OF POLY（DIVINYLBENZENE-co-ACRYLIC ACID） IN CROSSLINKING PRECIPITATION POLYMERIZATION

Divinylbenzene-80 （DVB-80） and polar monomer acrylic acid （AA） having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2＇-azobis（isobutyronitrile） （AIBN） as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.