An adsorption study of Sr2+ from saline sources by coconut shell charcoal

The adsorption potential of charcoal for the removal of heavy metal ions is well documented in the literature. However, its exploration for uptake of technologically valuable metal ions such as Sr²⁺ is poorly known. In this work, the batch adsorption study of Sr²⁺ ion from aqueous solution as well as from saline matrix (>3% of NaCl) onto charcoal has been carried out. The experiments were conducted with two charcoals, i.e., our prepared charcoal (coconut shell charcoal) and commercial charcoal. Strontium adsorption has been investigated as a function of its initial concentration, contact time, and varied mass of adsorbent. Equilibrium adsorption data were evaluated for Langmuir and Freundlich isotherm models. The adsorption capacities (mg/g) of Sr²⁺ present in the salt matrix onto coconut shell charcoal and commercial charcoal was found to be 18.4 and 22.2, respectively. Uptake of Sr²⁺ from subsoil brine onto coconut shell charcoal has been successfully demonstrated in this work.     

Adsorption of Methylene Blue on Montmorillonite

ABSTRACT

Adsorption of Methylene Blue ( MB) on Na-, Fe- and Al-montmorillonite suspensions at 298.15 K were studied. The effect of different exchangeable cation on the adsorption amount of MB was determined. The results show that methylene blue cations( MB⁺ ) replace Na? more easily than they do Fe³⁺ and Al^{3 +} The adsorption isotherms on the three montraorillonites were all of Langmuir type, except that the isouHerm of MB on Na-montmorillonite presents nonmonotonic curve at low surface coverage. The specific surface areas in suspension were calculated by( MB ^{3 +} )method, and Na^? is more effective to determine the specific surface area by MB method in suspension than Fe^{3 +} and A^{3 +} The discrepancy of the specific surface area measured by MB and BET method was discussed.     

AgPt nanoparticles supported on magnetic graphene oxide nanosheets for catalytic reduction of 4‐nitrophenol: Studies of kinetics and mechanism

Ag_x Pt_100−x (x  = 0, 25, 50, 75 and 100) nanoparticles were grown on the surface of magnetic graphene oxide nanosheets (Fe₃O₄@GO) for the first time. The as‐prepared nanocomposites were characterized using various techniques such as Fourier transform infrared spectroscopy, powder X‐ray diffraction, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscopy, Brunauer–Emmett–Teller surface area analysis, vibrating sample magnetometry and thermogravimetric analysis. The Fe₃O₄@GO‐Ag_x Pt_100−x catalysts were applied in the reduction of 4‐nitrophenol (4‐NP) to 4‐aminophenol using sodium borohydride (NaBH₄). The synthesized nanocomposites exhibited excellent catalytic performance in the reduction of 4‐NP with high recyclability for five consecutive runs. The Fe₃O₄@GO‐Ag₇₅Pt₂₅ nanocomposite exhibited the best catalytic activity with a rate constant as high as 140.6 × 10⁻³ s⁻¹. The obtained kinetic data were modelled with the Langmuir–Hinshelwood equation. The energy of activation and thermodynamic parameters including enthalpy, entropy of activation and activation Gibbs free energy were calculated.     

Controlled Activity Polymers. IV. Copolymers of 2-(1-Naphthylacetyl)Ethyl Acrylate With Hydrophilic Comonomers: Synthesis and Characterization

2-(1-Naphthylacetyl)ethyl acrylate (NAEA) was synthesized by esterification of 1-naphthylacetic acid (NAA) and 2-hydroxyethyl acrylate (HEA) and then polymerized to obtain the polymer-bound auxin NAA. The resulting polymer is potentially useful as a plant growth regulator through hydrolytic release of NAA. Copolymers of NAEA with hydrophilic comonomers were prepared by solution polymerization. The copolymer compositions were determined from elemental analysis, ¹³C-NMR, and UV spectroscopy. The copolymer microstructure was predicted from the reactivity ratios in order to investigate the influence on the behavior of controlled release. These model structures will be utilized for assessment of structure/hydrolysis relationships in a subsequent paper.     

Mathematical modeling of a slurry reactor for DME direct synthesis from syngas

In this paper,an axial dispersion mathematical model is developed to simulate a three-phase slurry bubble column reactor for direct synthesis of dimethyl ether(DME) from syngas.This large-scale reactor is modeled using mass and energy balances,catalyst sedimentation andsingle-bubble as well as two-bubbles class flow hydrodynamics.A comparison between the two hydrodynamic models through pilot plantexperimental data from the literature shows that heterogeneous two-bubbles flow model is in better agreement with the experimental data thanhomogeneous single-bubble gas flow model.Also,by investigating the heterogeneous gas flow and axial dispersion model for small bubblesas well as the large bubbles and slurry(i.e.including paraffins and the catalyst) phase,the temperature profile along the reactor is obtained.Acomparison between isothermal and non-isothermal reactors reveals no obvious performance difference between them.The optimum values ofreactor diameter and height were obtained at 7 m and 50 m,respectively.The effects of operating variables on the axial catalyst distribution,DME productivity and CO conversion are also investigated in this research.     

Corrosion inhibition of zinc in aqueous acidic media using a novel synthesized Schiff base – an experimental and theoretical study

Abstract

The kinetics of H₂ production during Zn corrosion in 0.5?M HCl without and with various additives of N,N'-bis-(1-hydroxyphenylimine)-2,5-thiophenedicarboxaldehyde (HPTD) was studied using gasometry and electrochemical techniques. The surface of the corroded Zn samples was investigated using SEM and Optical Profilometry. The rate of H₂ production (RHP) increased with the immersion time and temperature. Presence of HPTD mitigated RHP due to an adsorption process. The electrochemical impedance spectroscopy showed that HPTD had a good inhibitive effect. Polarization data proved that HPTD acted as a surface-active mixed-type inhibitor. Some thermodynamic parameters were deduced and discussed. Theoretical calculations were also conducted to corroborate the capability of HPTD to protect Zn surface from corrosion process.     

磁性Fe3O4@SiO2@ZrO2对水中磷酸盐的吸附研究

合成了以Fe₃O₄为核,以SiO₂为壳的磁性纳米微粒（Fe₃O₄@SiO₂）,并采用沉淀沉积法将ZrO₂包覆到材料表面。通过XRD、TEM、XPS和N₂吸附/脱附等手段对材料进行表征,结果表明材料Fe₃O₄@SiO₂@ZrO₂上沉积了氧化锆纳米颗粒,具有超顺磁性,可在外加磁场作用下实现从水中快速分离。同时系统研究了材料对水中磷酸盐的吸附行为,结果表明沉积ZrO₂使得材料对磷酸盐表现出良好的吸附性能,并且随着沉积量的增大吸附量增加。吸附等温线可用Freundlich方程拟合。吸附动力学可用拟二级动力学模型拟合,吸附速率随初始浓度增加而减缓。磷酸盐吸附量随溶液pH值的增大而减小,但几乎不受离子强度影响。     

Physicochemical assessment of prednisone adsorption on two molecular composites using statistical physics formalism in cosmetics

In this paper, we consider two different polyethylene filter plates coated with multi-walled carbon nanotubes (MWCNTs) and synthesized by surface molecularly imprinted technique, namely plate@MWCNTs@MIPs (PMIPs) and plate@MWCNTs@NIPs (PNIPs). They were used as effective adsorbents for selective adsorption and detection of prednisone (PS) in cosmetics. As a first assessment to investigate the performance of these adsorbents, the PS adsorption isotherms were analyzed using an advanced multilayer statistical physics model at three different temperatures ( 293, 303 and 313 K) and over a wide PS concentration range (0.09–1.5 mg/mL). The obtained analyzing results from the best fitting model showed that the PMIPs adsorbent displayed a high adsorption capacity (27.4 mg/g) due to the contribution of the number of PS molecules per site (n_m) combined with the receptor sites density (D_m), which displayed a high recognition ability due to the adsorption energy. Modeling analysis process indicated that the PS molecules could be anchored on the PMIPs and PNIPs surfaces via a non-parallel orientation where the adsorption is a multi-molecular process. The calculated adsorption energies globally varied from 4.51 to 7.62 kJ/mol, confirming the physical nature of the adsorption process for the studied systems, which is beneficial in cosmetics. Finally, three thermodynamic potentials (entropy, internal energy and free enthalpy) were evaluated for a better understanding of the physico-chemical behavior of the adsorption process.     

Multifunctional Zn0.3Al0.4O4.5 crystals: An efficient photocatalyst for formaldehyde degradation and EBT adsorption

The Zn_0.3Al_0.4O_4.5 nanoparticles (ZnAlONPs) with size of 70–90 nm are used as an efficient photocatalyst for formaldehyde (HCHO) degradation and effective adsorbent for the removal of eriochrome black-T (EBT) dye from synthetic aqueous solution. Degradation of HCHO reactions were studied using TiO₂ (homemade), TiO₂ (P-25) and ZnAlONPs by irradiating under 18 W daylight lamp source for photocatalytic degradation. The HCHO degradation rate is about 67, 76 and 89% for TiO₂ (homemade), TiO₂ (P25) and ZnAlONPs during 2 h reaction, respectively at initial formaldehyde gas concentration of 20 ppm. Maximum adsorption capacity was optimized by changing the parameters such as pH, EBT concentration and adsorbent dosage. A  200 mg of ZnAlONPs are useable for quick removal of EBT (>95%). Langmuir isotherm model showed a maximum adsorption capacity of 90.90 mgg⁻¹. The ZnAlONPs could be successfully reused upto 5^th adsorption/desorption cycle for EBT dye removal from water samples.