Synthesis of α,ω‐di(iodo)PVC and of four‐arm star PVC with identical active chain ends by SET‐DTLRP of VC initiated with bifunctional and tetrafunctional initiators

Na₂S₂O₄‐catalyzed single‐electron transfer – degenerative chain transfer‐mediated living radical polymerization (SET‐DTLRP) of VC initiated with the bifunctional initiators 1,2‐bis(iodopropionyloxy)ethane, dimethyl 2,5‐diiodohexanedioate, and bis(2‐methoxyethyl)‐2,5‐diiodohexanedioate as well as the tetrafunctional initiator pentaerythritol tetrakis(2‐iodopropionate) is reported. This SET‐DTLRP was performed in water at ambient temperature in the presence of polyvinyl alcohol and hydroxypropyl methylcellulose surfactants and provides methods for the synthesis of α,ω‐di(iodo)PVC with two identical active chain ends and of four‐arm star PVC with four identical active chain ends. These difunctional and tetrafunctional derivatives of PVC are also macroinitiators for the synthesis of ABA triblock copolymers and four‐arm star block copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 635–652, 2009     

Synthesis and characterization of star polymers initiated by hexafunctional discotic initiator through atom transfer radical polymerization

A novel hexafunctional discotic initiator, 2,3,6,7,11,12‐hexakis(2‐bromobutyryloxy)triphenylene (HBTP), was synthesized by the esterification of 2,3,6,7,11,12‐hexahydroxytriphenylene with 2‐bromobutyryl chloride. Atom transfer radical polymerizations of styrene, methyl acrylate, and n‐butyl acrylate were carried out in 50 vol % tetrahydrofuran with HBTP/copper(I) bromide/2,2′‐bipyridyl as an initiation system. The polymers produced had well‐controlled molecular weights and narrow molecular weight distributions (<1.2). On the basis of ¹H NMR spectra of the star polymer and its hydrolyzed products, we can conclude that the initiator quantitatively initiated the polymerization of vinyl monomers and that a star polymer with a discotic core was obtained. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2233–2243, 2001     

α,α-二溴乙酸乙酯作双官能引发剂ABA型嵌段共聚物的合成

自从 1 995年 Matyjaszewski[1] 和 Sawamoto[2 ] 同时发现原子转移自由基聚合 ( ATRP)以来 ,人们已采用几种不同的双官能引发剂合成了以丙烯酸酯为中间嵌段的 ABA型三嵌段共聚物 ,如α,α -二溴对二甲苯 [3] 、双 2 -溴丙酸乙二醇酯 [4 ] 以及 2 ,5-二溴己二酸二甲酯 [5] ,我们将这类双官能引发剂称为显性双官能引发剂 ,其分子结构分别见下式 :Br CH2 CH2 Br,CH3CBrHOO CH2 CH2 OOCBrH CH3,Br CCOOCH3H CH2 CH2 CCOOCH3H Br　　最近我们证实 ,当用 α,α-二溴化苄作引发剂进行苯乙烯的 ATRP时 ,所得聚苯乙烯大分子…     

An efficient synthetic-route to prepare [2,3,6-tri-O-(2-bromo-2-methylpropionyl]-β-cyclodextrin)

The efficient approach for the synthesis of [2,3,6-tri-O-(2-bromo-2-methylpropionyl]-β-cyclodextrin) (21Br-β-CD) is described. The reaction between 2-bromoisobutyric bromide and β-cyclodextrin was performed directly in 1-methyl-2-pyrrolidione solvent, leading to much less complicated procedures and higher yield (up to 89.5%) compared with those reported previously (17% yield). The product is an extremely useful initiator in synthesizing star polymers with well-defined structures using atom transfer radical polymerization for biomedical applications.     

γ-poly(glutamic acid) as an initiator of cationic polymerization of N-vinylcarbazole and N-vinyl-2-pyrrolidone

The cationic polymerization of vinyl monomers initiated by biosynthesized γ-poly(glutamic acid) (γ-PGA) powder surface was carried out in a heterogeneous system. It was found that the polymerization of N-vinylcarbazole (NVC) and N-vinyl-2-pyrrolidone (NVPD) is initiated by γ-PGA powder. The grafting of polymers onto γ-PGA surface was scarcely observed. The apparent activation energy of the polymerization of NVC and NVPD was estimated to be 20.2 and 24.8 kJ/mol, respectively. The polymerization was totally inhibited by the addition of triethylamine and pyridine, but not hydroquinone. The polymerization rate in nitrobenzene was larger than that in toluene. These results indicated the cationic nature of the polymerization. γ-PGA treated with KOH did not show the initiating activity of the polymerization. Therefore, carboxyl groups on γ-PGA powder surface play an important role in the initiation of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from carboxyl groups on γ-PGA powder surface and the propagation proceeds with carboxylate anion on the surface as counter ion. © 1993 John Wiley & Sons, Inc.     

Living radical polymerization of vinyl chloride initiated with iodoform and catalyzed by nascent Cu0/tris(2‐aminoethyl)amine or polyethyleneimine in water at 25 °C proceeds by a new competing pathways mechanism

The first example of living radical polymerization of vinyl chloride carried out in water at 25 °C is reported. This polymerization was initiated by iodoform and catalyzed by nascent Cu⁰ produced by the disproportionation of Cu^I in the presence of strongly Cu^II binding ligands such as tris(2‐aminoethyl)amine or polyethyleneimine. The resulting poly(vinyl chloride) was free of structural defects, had controlled molecular weight and narrow molecular weight distribution, contained two ～CHClI active chain ends, and had a higher syndiotacticity (62%) than the one obtained by conventional free‐radical polymerization at the same temperature (56%). This novel polymerization proceeds, most probably, by a combination of competitive pathways that involves activation by single electron transfer mediated by nascent Cu⁰ and degenerative chain transfer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3283–3299, 2003     

Synthesis of poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) amphiphilic coil‐rod block copolymer by anionic polymerization

A well‐defined amphiphilic coil‐rod block copolymer, poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) (P2VP‐b‐PHIC), was synthesized with quantitative yields by anionic polymerization. A low reactive one‐directional initiator, potassium diphenyl methane (DPM‐K), was very effective in polymerizing 2‐vinyl pyridine (2VP) without side reactions, leading to perfect control over molecular weight and molecular weight distribution over a broad range of initiator and monomer concentration. Copolymerization of 2VP with n‐hexyl isocyanate (HIC) was carried out in the presence of sodium tetraphenyl borate (NaBPh₄) to prevent backbiting reactions during isocyanate polymerization. Terminating the living end with a suitable end‐capping agent resulted in a P2VP‐b‐PHIC coil‐rod block copolymer with controlled molecular weight and narrow molecular weight distribution. Cast film from a chloroform solution of P2VP‐b‐PHIC displayed microphase separation, characteristic of coil‐rod block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 607–615, 2005     

VINYL MONOMERS BEARING CHROMOPHORE MOIETIES AND THEIR POLYMERS——Ⅹ.INITIATION AND PHOTOCHEMICAL PROPERTIES OF p-(N,N-DIMETHYLAMINO)STYRENE AND ITS POLYMERS*

A vinyl monomer having an electron-donating moiety, p-(N,N-dimethylamino)styrenc (DMAS),was synthesized. It was combined with benzoyl peroxide (BPO) to form a redox initiation system to initiatethe polymerization of methyl methacrylate (MMA). UV spectra measurements show that DMAS enters thePMMA chain as well. Both DMAS and its polymer P(DMAS) display strong fluorescence, and thefluorescence can be quenched by electron-deficient compounds such as methacrylonitrile, fumaronitrile andmethyl methacrylate etc. Moreover, DMAS can also form charge transfer complex (CTC) with strongelectron acceptors such as tetracyanoethylene (TCNE). The difference between the photochemical propertiesof DMAS and P(DMAS) were explained in terms of molecular structure change and polymer conformationeffect in solution. In addition, the CTC and exciplex formation of DMAS or P(DMAS) with C_(60) were alsostudied.     

腰果酚的紫外光固化机理和固化膜性能

研究了腰果酚在无光引发剂条件下的紫外光固化反应,并用IR、UV、元素分析、GPC等分析手段分析了腰果酚的紫外光固化机理及其固化膜性能。结果表明:在紫外光辐照下,腰果酚通过侧链发生氧化聚合反应,和酚羟基的邻对位失去质子形成的自由基引起的苯环缩合反应,最终形成体型高聚物。腰果酚的紫外光固化膜的常规物理机械性能、抗溶剂性、耐化学介质腐蚀性、热稳定性和抗紫外线性能均优于腰果酚醛缩聚物(PC)涂膜。     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.