Chemoselective Catalytic Hydrogenation of α,β-Unsaturated Ketones and α,β-Unsaturated Carboxylic Esters

ＣｈｅｍｏｓｅｌｅｃｔｉｖｅＣａｔａｌｙｔｉｃＨｙｄｒｏｇｅｎａｔｉｏｎｏｆα，β┐ＵｎｓａｔｕｒａｔｅｄＫｅｔｏｎｅｓａｎｄα，β┐ＵｎｓａｔｕｒａｔｅｄＣａｒｂｏｘｙｌｉｃＥｓｔｅｒｓＺＨＡＮＧＪｉｎｇ－ｗｅｎ＊，ＺＨＡＯＪｉａｎ－ｚｈａｎｇ，Ｚ...     

Bioisosterism between Sulfonyl Group and Phosphoryl Group-The Synthesis of New ALS Inhibitors N-(Arylamino Hydroxyl Phosphoryl)-N'-(4,6-Dimethoxypyrimidine-2-yl)ureas

Sulfonylureaherbicidesisanewclassofherbicidesdiscoveredinthemid-l97O's',whosemodeofactionhasbeenestablishedastheinhibitionofacetolactatesynthase(ALS,alsoreferredasacetohydroxyacidsynthase)'-Muchattentionhasbeenfocussedonthiskindofcompound,sincetheyhaveunprecedenteduserates,ahighdegreeofselectivity,andexcellentenvironmentalsafety'.NumerousmodificationsofthestrUctureofthisclassofherbicideshavebeenreported'.Wehavetakenattentiontothesimi1alltybetweenthesulfonylgroup(-SO2-)andphosphoryIgroup[-P…     

染料中间体间氨基-N-取代-苯磺酰胺的合成研究

以间氨基苯磺酸为原料，经乙酰化保护氨基，用氯磺酸／氯化亚砜将磺箕转变为磺酰氯，再分别与氨基G酸、吐氏酸、γ－酸、6－氨基－1，3－萘二磺酸、5，6－二氨基－1，3－萘二磺酸胺化缩合，水解去乙酰基，较高收率地合成了间氨基－N－取代－苯磺酰胺类染料中间体。产物结构经元素分析、红外、核磁和质谱确证。     

后处理对TiO_2纳米薄膜的表面结构和光催化活性的影响

半导体TiO2光催化材料对环境中各种污染物的明显去除效果已引起人们的广泛关注犤1～6犦。在普通钠钙玻璃表面涂制高光催化活性的TiO2纳米薄膜,制成环保建筑材料,不仅可以自洁玻璃表面,而且可以用于净化空气、处理废水等。但由于在热处理过程中玻璃基体内的Na+离子扩散到薄膜表面,形成光生电子和空穴的复合中心,使TiO2纳米薄膜的光催化活性大大降低犤7～10犦。为了减少玻璃中Na+离子对TiO2薄膜光催化活性的有害影响,Paz等犤8犦研究了将钠钙玻璃浸入酸溶液中,使玻璃表面的钠离子被酸中的氢离子置换出来;在玻璃表面形成SiO2凝胶层,以便阻…     

黄蜀葵多糖的分析

采用热水浸提 -乙醇沉淀、鞣酸除蛋白、过氧化氢和活性炭脱色、微晶纤维素柱色谱分离纯化工艺制备黄蜀葵根和茎中的多糖 ;用苯酚 -硫酸比色法测定该多糖的糖含量为93.8% ;薄层色谱法鉴定黄蜀葵多糖是由半乳糖、阿拉伯糖、鼠李糖组成 ;红外光谱法鉴定黄蜀葵多糖的糖键是α_吡喃糖苷键 ,且紫外扫描无核酸和蛋白特征吸收峰 ;比旋光度[α]D25 为 +122.2°～ +123.0°(0.3 ,H2O)。     

基于MCM-41分子筛表面的镱离子印迹聚合物的制备及其性能

运用离子印迹技术,以3-氯丙基三乙氧基硅烷为锚定剂,将功能单体直链聚乙烯亚胺(PEI)接枝在MCM-41分子筛表面,选择镱离子作为模板离子,以环氧氯丙烷交联制备出基于MCM-41表面的镱离子印迹聚合物Yb(Ⅲ)-IIP-PEI/MCM-41,并以同样的方法制备非离子印迹聚合物(NIP-PEI/MCM-41)。 利用傅里叶变换红外光谱仪和扫描电子显微镜等技术手段对Yb³⁺印迹聚合物进行表征,采用静态吸附法确定了Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺的最佳吸附条件及选择性吸附性能。 结果表明,Yb(Ⅲ)-IIP-PEI/MCM-41和NIP-PEI/MCM-41的最大吸附量分别为229.93和99.27 mg/g;印迹材料对Yb³⁺的吸附符合Langmuir模型;吸附平衡在40 min的时候基本可以达到,可以利用准二级动力学模型来描述其吸附过程;Yb(Ⅲ)-IIP-PEI/MCM-41对Yb³⁺具有较强的选择性,同时也具有很好的重复使用性能。 成功地将MCM-41和离子印迹聚合物的优点结合起来,制备出一种对稀土Yb离子既有高吸附量又有高选择性的吸附材料,为进一步将其应用在处理实际废水,分离回收低浓度稀土废水中的稀土元素等方面打下了基础。     

红紫素-18酰亚胺衍生物的合成及其可见光谱的研究

选择脱镁叶绿酸 a甲酯为原料进行 3 位化学修饰和E环改造 .经 3 乙烯基的溴化氢加成和与联苯酚的亲核取代反应 ,完成了 3 位联苯氧基的引入 ;在碱性条件下 ,通过空气氧化将E环转变为环己二羧酸酐形成红紫素 18甲酯衍生物 ;所得氧化产物进而和盐酸羟胺反应 ,经胺解开环和再缩合成环构成N 羟基红紫素 18酰亚胺衍生物 ;对其羟基进行烷基化和酰基化 ,合成出N 取代红紫素 18酰亚胺衍生物 .同时讨论了化学结构变化对分子可见光谱的影响 .所合成新化合物的结构均经UV ,IR ,1 HNMR光谱和元素分析予以确认     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

两个含有平行交替链的新型二氰胺配位高聚物: {Mn(dmpz)[N(CN)2]2}2和{Cu(dmpz)[N(CN)2]2}2

Two new dicyanamide coordination polymers, {Mn(dmpz)[N(CN)2]2}2 (1) and {Cu(dmpz)[N(CN)2]2}2 (2)(dmpz=3,5-dimethylpyrazole), were synthesized and characterized by single crystal X-ray diffraction analysis and IR spectroscopy. In 1 and 2 the metal ions have two different coordination modes, where one is coordinated to four dicyanamide anions and two monodentate dmpz molecules to form a slightly distorted octahedral geometry, while the other adopts octahedral geometry, surrounded by four nitrile N atoms and two amide N atoms of the dicyanamide anions. Both complexes contain two alternating chains that are parallel to each other.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.