Simultaneous determination of carbohydrates and organic acids in beer and wine by ion chromatography

The simultaneous determination of mono-organic acids and carbohydrates by ion chromatography with both conductometric and pulsed amperometric detection is described. The carbohydrates, such as mannitol, arabinose, glucose, fructose, lactose, sucrose, raffinose, and maltose, as well as monoorganic acids including acetate, glycolate, formate, pyruvate, and fluoride are separated as anions by ion-exchange chromatography with 0.080 mol/L sodium hydroxide eluent at 1 mL/min within 12 min. Carbohydrates are determined by pulsed amperometric detection and mono-organic acids are determined by suppressed conductivity detection. The species in beverages are determined.     

乙醇羰化反应负载型催化剂的研究

本文由七种负载型催化剂中选出两种比较好的乙醇羰化催化剂,研究了影响反应转化率和选择性的因素,考察了活性组份的价态和载体的酸性。此外,还对催化剂进行了能量色散X射线分析。从其结果看,谱图上只有活性中心铑的谱峰而没有氯的谱峰,说明铑是以离子形式进入载体,而不是以化合物形式被吸附于载体上。     

用化学除氧技术以1,2-二溴乙烷作重原子微扰剂-β-环糊精诱导室温燐光法测定4种痕量多环芳烃

本文首次将亚硫酸钠化学除氧技术应用于β－环糊精诱导室温燐光（β－CD－RTP）法中，除氧简便快速（1～1．5min），测定了痕量二氢苊、芴、菲、7，8－苯并喹啉。1，2－二溴乙烷作重原子微扰剂，其用量减少到每10mL中5μL，体系基本澄清，pH≈6．8，分析特性优于通氮除氧技术所得结果。     

氯磺化聚乙烯结构和性能研究Ⅰ.氯磺化反应及其对晶体结构的影响

氯磺化聚乙烯水解后是一种性能特异的离子交换膜。本文研究了低密度及高密度聚乙烯中空纤维氯磺化反应时间与交换容量之间的关系,并用红外光谱及广角X射线衍射法测定了氯磺化反应对聚乙烯晶体结构的影响。结果表明,氯磺化反应主要发生在聚乙烯的非晶区,最大交换容量及反应速度均与非晶区含量有关。反应对晶粒表面也有一定程度的侵蚀作用,随着交换容量的增加,结晶度下降,晶粒度减小。低密度及高密度聚乙烯的变化趋势相似,但前者比后者变化更显著。     

Self-repairing polymers: poly(dioxaborolane)s containing trigonal planar boron

The molecular weight of poly(dioxaborolane)s can be controlled during the polymerization reaction or through post-polymerization processing in such a manner that hydrolytic damage to these materials may be repaired, thereby regenerating the polymer.     

Laser-induced fluorescence of cyclohexadienyl (c-C6H7) radical in the gas phase

A laser-induced fluorescence spectrum was observed in the 500-560 nm region when a mixture of 1,4-cyclohexadiene and oxalyl chloride was photolyzed at 193 nm. The observed excitation spectrum was assigned to the A (2)A(2)<--X (2)B(1) transition of the cyclohexadienyl radical c-C6H7, produced by abstraction of a hydrogen atom from 1,4-cyclohexadiene by Cl atoms. The origin of the A<--X transition of c-C(6)H(7) was at 18 207 cm(-1). From measurements of the dispersed fluorescence spectra and ab initio calculations, the frequencies of several vibrational modes in both the ground and excited states of c-C(6)H(7) were determined: nu(5)(C-H in-plane bend)=1571, nu(8)(C-H in-plane bend)=1174, nu(10)(C-C-C in-plane bend)=981, nu(12)(C-C-C in-plane bend)=559, nu(16)(C-C-C out-of-plane bend)=375, and nu(33)(C-C-C in-plane bend)=600 cm(-1) for the ground state and nu(8)=1118, nu(10)=967, nu(12)=502, nu(16)=172, and nu(33)=536 cm(-1) for the excited states.     

STRUCTURE CHARACTERIZATION AND CATALYTICACTIVITY TEST OF Ni(II) COMPLEXES CONTAINING2-(DIPHENYLPHOSPHINOAMINO) PYRIDINE(PAP)

IntroductionIn1962,N.V.Kutepow'SgroupfirstusedcomplexesofFe,CoandNiascatalyststocatalyzecarboXylationofethanoltopreparepropanoicacidanditsderivants.Thereactionpressurewashighandtheyieldwaslow.LateronPaulalsandhiscolleagueusedabC13andiodineascatalyst,which…     

二次有机气溶胶的气体/粒子分配理论

本文重点评述了二次有机气溶胶形成的气体/粒子分配理论,简要介绍了它的发展和可能的应用.在大气中,气体有机物种的氧化可以产生半挥发性的有机化合物,二次有机气溶胶的形成可以用气体/粒子分配的吸收模型来评估.气体/粒子分配过程决定于半挥发性化合物的成分、浓度和蒸气压,以及吸收性材料的浓度和成分.在气体/粒子分配理论的基础上,人们又研究和开发出二次有机气溶胶的分子组分的气体/粒子分配的热力学模型,它可以用来预估气溶胶中液态水的含量、无机物的分布、亲水性和疏水性有机物的分布.二次有机气溶胶形成的化学机理和气体/粒子分配的热力学模型与加利福尼亚工学院三维都市/区域性大气模型相结合,可以用于气相和气溶胶相模拟.     

功能微粒材料的制备及其细胞作用研究(英文)

随着纳米科学的迅速发展,越来越多的微粒材料被设计和制备出来,并应用于生物医学领域,取得了令人瞩目的进展和成就。近年来,我们课题组发展了一系列具备可控表面化学与结构、特定刺激响应性能和可控装载与释放性能的微粒材料,尤其是基于层层自组装的中空微胶囊。同时,我们也致力于研究微粒材料与细胞的相互作用,阐明其物理化学性质对细胞内吞和细胞功能的影响。通过这些研究,我们希望进一步建立功能性微粒材料的生物学功能优化的规律,推动其在生物医学领域的应用。     

Low Temperature Diesel Particulate Filter Regeneration by Atmospheric Air Non-thermal Plasma Injection System

An experimental study of the regeneration of diesel particulate filter (DPF) was conducted through the use of a self-designed Non-thermal plasma (NTP) injection system with an experimental temperature of 20–300 °C, with atmospheric air being used as the gas source. The results revealed that the PM could be broken down into CO and CO₂ by NTP, through a discharge reaction of the NTP reactor. As the temperature increases, the mass of C₁ (mass of C in CO) showed an overall declining trend. Interestingly, the mass of C₂ (mass of C in CO₂) and C₁₂ (the sum of C₁ and C₂) both showed an initial increase, followed by a decrease. The peak mass of C₁₂ appears at 150 °C, and both axial and radial temperature gradients are less than the limit of DPF temperature gradient at this temperature. In conclusion, DPF can be regenerated by the NTP technology at a lower temperature, which can aid in the avoidance of thermal damage of DPF. The technology boasts a great advantage in adopting atmospheric air as its gas source, which can not only reduce costs, but also is convenient.