位相物体激光全息二次曝光法无损检测

为借助激光全息进行无损检测，获得位相物体的信息，对位相物体激光全息二次曝光法无损检测进行了研究，指出一般的二次曝光法测位相物体典型光路的缺点，提出了物光波2次通过样品的改进方案。利用此方案对一些位相物体(如普通玻璃和有机玻璃)作了无损检测实验，得到了较满意的实验结果。与普通检测方法相比，该方法具有精度高、结果直接可靠、不损伤物体等诸多优点。对改进方案稍作改动，即可用于塑料制品和玻璃制品生产线对加工产品进行在线产品质量监控。     

偏振小孔干涉仪

偏振小孔干涉仪是一种可实用的新型干涉仪。它综合小孔衍射技术、偏振技术和共光路设计为一体,具有条纹对比度可调、抗干扰能力强和非接触检验等优点,可广泛用于各种光学元件及其胶合层的检验。目测精度达1/10λ,计算机条纹处理精度可调。     

傅里叶变换红外光谱和傅里叶变换拉曼光谱法无损鉴别药材的真伪

利用傅里叶变换红外（FT-IR）和近红外傅里叶变换拉曼（NIR FT-aman）光谱法对大黄（西宁大黄）与伪品大黄（华北大黄、山大黄、水根大黄）进行了无损快速的鉴别。结果表明：尽管正品大黄与伪品大黄差别较小，有大部分的化学成分有很大的相同之处，但在红外、拉曼谱图中各自的特征峰较突出，根据谱峰的强度和位置可容易地将它们区别开来。红外和拉曼光谱法相互印证，相互补充，具有快速、准确、操作简单、重复性好、不需对样品进行分离提取，可直接鉴别等特点。     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

La0.7Ca0.3Mn1-xCrxO3的激光超声研究

运用激光超声的方法测定了五种不同掺杂的巨磁锰氧化物La0.7Ca0.3Mn1-xCrxO3(0.01≤x≤0.60)室温(300 K)下的超声纵波声速.结合热导率的数据,对声速随掺杂浓度的变化原因进行了深入的分析.得到在顺磁绝缘态Cr3 离子的掺入造成了晶格局部涨落的变化,低掺杂使得晶格局部涨落增强,声子U散射弛豫时间减小.     

磁粉法检测表面裂纹概率曲线的测定

本文介绍了利用实物零件测定裂纹检出概率的方法，并作出了用磁粉法检测表面裂纹的检测概率曲线，为大型构件检测周期的确定提供了可靠数据，为结构损伤容限设计，可靠性设计提供了重要的依据。     

Additive-subtractive phase-modulated shearography with synchronized acoustic stressing

A robust electronic shearography technique is described that is immune to ambinet noise. In this technique, additive speckle-interference images containing information about the same two states of deformation of a test object undergoing acoustic stressing are acquired in each video frame. When a spatially nonuniform phase modulation is introduced in every other frame during the video sequence (using a tilting mirror) and the additive interference images are subtracted sequentially using a real-time image processor, the self-interference component of sheared-speckle interference pattern is removed. The susceptibility of this method to environmental noise caused by induced thermal noise and low frequency vibration is demonstrated to be lower than that of conventional substractive shearography methods; fringe visibility and contrast are significantly improved as well. The ability of this technique to work in a turbulent environment is demonstrated, and application to detection of structural defects in adhesively bonded structures, a problem of interest in nondestructive evaluation of structures, is shown.     

条形平板中裂纹识别的遗传算法

研究条形平板中平行于上下边界的单一裂纹的识别问题。给出了当一声波入射这一条形平板时，裂纹参数与反射、透射系数之间的关系式，并应用遗传算法对裂纹进行了定量识别。计算结果表明本文给出的方法具有较好的识别精度。     

Trapped particle detection in bonded semiconductors using gray-field photoelastic imaging

In this paper we present inspection results from several bonded wafer systems using a newly developed infrared gray-field polariscope (IR-GFP). This device measures the residual stress-fields associated with defects trapped at the bonded interface to enable the detection of subwavelength defects. Results from IR-GFP imaging are contrasted with conventional infrared transmission (IRT) imaging of the same samples, showing marked improvements in defect detection as well as the ability to quantify the residual stress fields. This inspection method reveals that interfaces deemed defect-free using IRT imaging may be, in fact, teeming with defects.