光突发交换网络中最长队列优先调度组装机制

提出了光突发交换网络中的最长队列优先调度（LQF-SA）机制，将边缘节点的突发组装和突发调度两种技术紧密结合在一起.在现实网络中，业务通常是非均匀分布的，即在某些源宿对之间存在更大的业务流量.仿真结果表明，LQF-SA机制可以很好地完成非均匀分布业务流的组装.即使在均匀分布业务流输入下，LQF-SA机制在突发大小分布、组装效率和突发丢失率等方面也优于已提出的轮询调度组装（RR-SA）机制.     

光突发交换的交换控制策略和光缓存配置

光突发交换是面向下一代互联网的光交换模式.讨论了异步光突发交换系统的交换控制策略以及相应光缓存的优化配置策略.除了传统预约模式的交换策略,还研究了非预约和改进型预约模式,它们的性能评估由计算机仿真给出.结果表明:在条件相当情况下,改进型预约模式具有最低的丢包率.同时光缓存的配置对上述几类交换控制策略的性能都有很大影响,仿真结果指出:光缓存的粒度对系统性能具有重要影响,所讨论的几类交换模式都存在最佳时延粒度,研究结果对光交换矩阵的设计有指导意义.     

Synthesis and burst strength of water‐swollen immunoisolatory tubules

A series of amphiphilic hydrogel tubules have been prepared by copolymerizing/crosslinking hydrophilic poly(dimethylacrylamide) segments with hydrophobic di‐, tri‐, and octamethacrylate‐telechelic polyisobutylene crosslinkers, and their elastic modulus and burst strength in the water‐swollen state were investigated. Because the burst characteristics of hydrogels have not yet been quantitatively investigated, equipment was designed and built to generate fundamental insight into the burst properties of thin‐walled (200–250 μm) narrow lumen (2–3 mm i.d.) water‐swollen tubules. The theory developed to describe quantitatively the inflation behavior of thin‐walled rubber tubules was adapted to treat our experimental observations. Changes in the burst strength, elastic modulus, and expansion during the inflation of hydrogel tubules were interpreted in terms of the molecular weight of the hydrophilic segments between crosslinking sites (M_{c,hydrophilic}), which in turn was calculated according to the rubber elasticity theory. According to these investigations, the burst strength of our water‐swollen amphiphilic tubules is in the 0.2–0.5 MPa range, which is sufficient for implantation and immunoisolatory applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2075–2084, 2002     

细胞呼吸爆发的微量量热学研究

The heat production of Wistar rat polymorphonuclear leukocytes (PMN) was measured by an LKB 2277 Thermal Activity Monitor. When PMN were activited with phorbol-12-myristate13-acetate (PMA), the respiratory burst was recorded by greatly incr eased heat production. Experiment was also carred out in the present of the inhibitor, Total Flavonoids of Lycium Barbarum L. (TFL). The respiratory burst heat production peak was disappeared, but the heat production curve was higher than that of PMA because TFL increased the metabolic activities of PMN.     

A maximum-efficiency-first multi-path route selection strategy for optical burst switching networks

In this paper, the impact of a path selection on other existing paths in optical burst switching (OBS) networks is studied by analyzing the contention among different traffic streams and the interaction between the route selection and traffic load balance. The results show that there exists a mutual reinforcement interaction among the traffic load of a path, the path burst loss ratio and the contention ability of the path when burst loss ratio based multi-path selection strategies are adopted, which may increase the unbalance of traffic and lead to severe congestion further. A maximum-efficiency-first multi-path selection strategy, which considers the performance of the burst flows and the impact of a path selection on existing OBS paths at the same time by a combined metric of route efficiency, is proposed to maximize the utility of the burst flows and minimize the increment of lost throughput on the path. The performance of the proposed multi-path selection strategy is evaluated through simulation. The results show that the presented strategy obviously outperforms the least burst loss ratio strategy and shortest path first strategy in terms of the burst loss ratio in the practical unbalanced background traffic, especially when the network is heavily loaded.     

A continuum model for intermittent deformation of single crystal micropillars

Strain bursts are often observed during compression tests of single crystal micropillars. In this work, we formulate a new continuum model that accounts for the strain bursts within the framework of crystal plasticity. The strain bursts are separated from the loading stage (nearly elastic loading) by introducing a dimensionless constant in the continuum model, and are detected by load serrations. The boundary conditions in the context of micropillar compression are studied and they are shown to be changing and unpredictable as plastic deformation proceeds. To evaluate the validity of our model, finite element simulations of the uniaxial compression tests on nickel micropillars are performed. Our simulations produce clearly visible strain bursts during the plastic flow and the produced intermittent flows are comparable with the experimental observations. For the bulk crystal, a series of strain bursts is identified in the course of plastic flow, despite an apparently smooth stress–strain response. We also show that the intermittent flow is intensified in the micrometer-scale due to both increasing numbers of the successive strain bursts and increasing amplitude of the strain burst, when the specimen size decreases. Finally, we show that the occurrences of the strain bursts are always associated with negative values of the second-order work.     

Performance analysis of an integrated scheme in optical burst switching high-speed networks

A new integrated scheme based on resource-reservation and adaptive network flow routing to alleviate contention in optical burst switching networks is proposed. The objective of the proposed scheme is to reduce the overall burst loss in the network and at the same time to avoid the packet out-of-sequence arrival problem. Simulations are carried out to assess the feasibility of the proposed scheme. Its performance is compared with that of contention resolution schemes based on conventional routing. Through extensive simulations, it is shown that the proposed scheme not only provides significantly better burst loss performance than the basic equal proportion and hop-length based traffic routing algorithms, but also is void of any packet re-orderings.     

Burst detection in turbulent channel flows based on large eddy simulation databases

As one of the important coherent structures in the near-wall region, turbulent burst is responsible for the production and transport of major turbulent kinetic energy and Rey- nolds stress[1]. Nearly half of turbulent kinetic energy or Reynolds stress is produced in the near-wall region, and 80% flows in outer region only contribute 20% of them. Both ejection and sweeping events contribute 60―70% of the turbulent shear stress respec- tively[2]. Recently, turbulent burst process has been foun…     

Mechanism of Crystal Phosphor Luminescence

An experimental method has been developed for determining the mechanism of luminescence of crystals by the changes arising in the intensity of a burst of their luminescence under the action of a constant electric field. An example of determining the mechanism of luminescence of AgBr crystals and AgBr_0.95 and AgBr_0.60Cl_0.40 solid solutions by the method proposed is presented. We were the first to establish that the low-temperature photoluminescence of AgBr_0.95I_0.05 in the band with _max = 540 nm proceeds by the Schone–Klasens recombination mechanism. It has also been established that the longwave luminescence of AgBr, AgBr_0.95I_0.05, and AgBr_0.60Cl_0.40 in the band with _max = 630 nm arises as a result of the recombination of electrons localized on a luminescence center with free holes.     

ECR离子源引出束流周期性波动研究

Earlier we reported an ion current jump which was observed at a fixed negative biased disc potential in the 6.4GHz ECR ion source at VECC,Kolkata.In a recent experiment with neon ions,we measured the time spectra of the ion current and observed the presence of a burst frequency in the kilohertz range.This frequency shows a correlated jump with the ion current jump described above.Another interesting feature is that the observed burst frequency shows a good linear correlation with the extracted ion current.The higher the ion current,the higher is the burst frequency.This means that current per burst is a constant factor;when there are more number of bursts,the current also increases.