Preparation of benzoylchitosans and their chiroptical properties in dilute solutions

Two benzoyl substituted chitosan derivatives, 3,6‐O‐dibenzoylchitosan (DBC) and 2‐N‐3,6‐O‐tribenzoylchitosan (TBC), were prepared, and their optical activities in organic solvent were investigated by circular dichroism (CD). For TBC, two splitting bands (a negative one at 288 nm and a positive one at 274 nm) corresponding to the ¹L_b transition of the benzoyl group were observed in chloroform and dichloromethane, while only a negative CD band was recorded in N, N‐dimethylformamide (DMF). These results indicated that the transition moments of benzoyl groups were orderly arranged along the helical polymer chain when TBC was dissolved in a solvent with low polarity, but the same ordered structure did not appear in a polar solvent of DMF. For DBC, only negative CD signals corresponding to the ¹L_b transition of the benzoyl group were observed, regardless of the solvent property, which indicated that the chromophores were not arranged in an ordered fashion with appropriate geometry to interact with one another to induce bi‐signate CD signals. Adding methanol or DMF to the solution of TBC/chloroform resulted in a progressive decrease of the intensity of the positive split band at 274 nm. The intensity of the positive band was weakened upon heating a solution of TBC/chloroform from 20 to 60 °C. The results suggested that the ordered arrangement of the chromophores in the TBC system was dependent on solvent and sensitive to temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4107–4115, 2004     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.     

Designing a deep-UV nonlinear optical monofluorophosphate

Science China Chemistry - As structural variants of famous hexagonal tungsten bronzes, hexagonal tungsten oxides (HTO) represent an important family with fascinating functional properties, such as...     

An efficient method for 3,4-dihydroisoquinolinium ion formation,leading to a facile introduction of nucleophiles

The ketene silyl acetal derived from ethyl 2-benzyltetrahydroisoquinoline-1-carboxylate undergoes a rapid oxidation reaction with N-bromosuccinimide to form 3,4-dihydroisoquinolinium ion, which reacts with Grignard reagents to give 1,1-disubstituted tetrahydroisoquinolines in good yields.     

High Correlation between Oxidation Loci on Graphene Oxide

Recent experiments have shown the coexistence of both large unoxidized and oxidized regions on graphene oxide (GO), but the underlying mechanism for the formation of the GO atomic structure remains unknown. Now, using density functional calculations, 52 oxidation pathways for local pyrene structures on GO were identified, and a kinetic profile for graphene oxidation with a high correlation between oxidation loci was proposed, which is different from the conventional view, which entails a random distribution of oxidation loci. The high correlation is an essential nature of graphene oxidation processes and can be attributed to three crucial effects: 1) breaking of delocalized π bonds, 2) steric hindrance, and 3) hydrogen‐bond formation. This high correlation leads to the coexistence of both large unoxidized and oxidized regions on GO. Interestingly, even in oxidized regions on GO, some small areas of sp²‐hybridized domains, similar to “islands”, can persist because of steric effects.     

高效液相色谱法测定强化食品中维生素C的含量

建立了强化食品(饮料、奶粉、含乳饮料、大米、果泥及果冻)中维生素C含量的高效液相色谱检测方法。优化了样品处理方法,在水浴控温和避光条件下处理样品,避免维生素C被氧化。选用Tech Mate C18–ST(250 mm×4.6 mm,5μm)反相色谱柱,以0.05 mol/L磷酸二氢钾缓冲溶液(p H 3)为流动相,流量为1.0m L/min,检测器为光电二极管阵列检测器,检测波长为266 nm。线性范围为0.2~100μg/m L,相关系数为0.999 6,果泥中维生素C的定量限为20 mg/kg,其它为100 mg/kg,加标回收率为82.2%~107%,测定结果的相对标准偏差为1.23%~6.86%(n=8)。该方法简单快速,其灵敏度、准确度和精密度均能满足强化食品中维生素C的检测要求。     

Branched polymer via free radical polymerization of chain transfer monomer: A theoretical and experimental investigation

A simple mathematic model for the free radical polymerization of chain transfer monomers containing both polymerizable vinyl groups and telogen groups was proposed. The molecular architecture of the obtained polymer can be prognosticated according to the developed model, which was validated experimentally by homopolymerization of 4‐vinyl benzyl thiol (VBT) and its copolymerization with styrene. The chain transfer constant (C_T) of telogen group in a chain transfer monomer is considered to play an important role to determine the architecture of obtained polymer according to the proposed model, either in homopolymerization or copolymerization. A highly branched polymer will be formed when the C_T value is around unity, while a linear polymer with a certain extent of side chains will be obtained when the C_T value is much bigger or smaller than unity. The C_T of VBT was determined to be around 15 by using the developed model and ¹H NMR monitored experiments. The obtained poly(VBT) and its copolymers were substantiated to be mainly consisted of linear main chain with side branching chains, which is in agreement with the anticipation from the developed model. The glass transition temperature, number average molecular weight, and its distribution of those obtained polymer were primarily investigated. This model is hopefully to be used as a strategy to select appropriate chain transfer monomers for preparing hyperbranched polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1449–1459, 2008     

PCL/SiO2杂化纳米相微结构与晶态成核生长特性

应用扫描电子显微镜、广角X射线衍射和差示扫描量热手段研究了有机高分子/无机组分间以物理次价力(氢键)键合的高分子量PCL/SiO2杂化材料纳米相微结构和PCL高分子链在该微结构环境中的结晶成核生长特性及其影响因素.研究结果表明:杂化体系中高分子/无机组分间的微相分离尺度在纳米数量级,高分子微区的平均相畴尺寸在70nm左右,无机相形态呈现不规则的颗粒状.两相均匀分布程度与体系中组分间的氢键键合强度有关.PCL杂化后结晶度减小,对应的微晶尺寸明显改变,平衡熔点随无机组成含量的增加而下降.高分子链在晶核表面折叠形成结晶结构所需的能量增加.这一结果归因于无机非晶SiO2和键合强度的影响.     

MB2镁等四种金属材料的本构关系和动态断裂研究

采用炸药爆轰－分离飞片加载装置与电容传感技术相结合，由高速示波器连续记录靶板自由面速度剖面，通过波剖面的时间分辨测量，研究了ＭＢ＿２镁、ＬＹ－１２铝、钨合金、２１６９钢四种金属材料的动力学响应特性，给出了这几种材料在弹性－理想塑性模型假设下的本构关系，还给出了它们的动态断裂强度，并对标准化层裂强度与破坏比功、屈服强度之间的相关性进行了分析和讨论。     

Existence and Concentration of Solutions For Sublinear Schrödinger-Poisson Equations

We concern the sublinear Schrödinger-Poisson equations \(\left\{ \begin{gathered}- \Delta u + \lambda V\left( x \right)u + \phi u = f\left( {x,u} \right)in{\mathbb{R}^3} \hfill \\- \Delta \phi = {u^2}in{\mathbb{R}^3} \hfill \\ \end{gathered} \right.\) where λ > 0 is a parameter, V ∈ C(R³,[0,+∞)), f ∈ C(R₃×R,R) and V^-1(0) has nonempty interior. We establish the existence of solution and explore the concentration of solutions on the set V^-1(0) as λ → ∞ as well. Our results improve and extend some related works.