芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Thermal degradation of wood treated with guanidine compounds in air: Flammability study

Wood has been treated with guanidine phosphate, guanidine nitrate, guanidine carbonate and guanidine chloride to impart flame retardancy. The samples were subjected to differential thermal analysis (DTA) and thermogravimetry (TG) from ambient temperature to 800°C in air to study their thermal behaviors. From the resulting data, kinetic parameters for different stages of thermal degradation were obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy was found to decrease from 116 to 54 kJ mol^–1; the char yield was found to increase from 5.6 to 34.9%, LOI from 18 to 41.5, which indicated that the flame retardancy of treated wood was improved. Effects of the different compounds on the degradation and flammability of wood have also been proposed.This revised version was published online in November 2005 with corrections to the Cover Date.     

聚乙烯塑料在连续超临界水反应器中的油化研究

在连续超临界水（SCW）反应器中考察了反应温度、停留时间和反应压力对聚乙烯（PE）降解油化的影响。实验结果表明，在120s、25MPa下，从500℃提高到550℃，液体收率呈现先升后降的趋势，在530℃达到最大值（79%）；在520℃、25MPa下，随停留时间的延长，PE裂解程度加深，产物轻质化程度提高，导致液体收率降低，停留240s时，气体收率达到43%；反应压力对产物收率的影响较小，气、液产物中烯/烷比随反应压力的增加而增大。     

Photocatalytic activity and biodegradation of polyhydroxybutyrate films containing titanium dioxide

This study aims to evaluate the photocatalytic activity and biodegradation of polyhydroxybutyrate (PHB) films containing titanium dioxide (TiO₂). Nanosized TiO₂ photocatalysts were immobilized onto PHB film to overcome the difficulty of the recovery process. PHB is a suitable base material as it is naturally biodegradable and is produced from renewable resources. The photocatalytic degradation of organic compounds, photocatalytic sterilization activity and biodegradation rate in garden soil of PHB-TiO₂ composite films were investigated. After an hour under solar illumination, 96% of methylene blue solution was decolorized. The antibacterial activity against Escherichia coli (E. coli) using PHB-TiO₂ composite film exhibited enhanced photocatalytic sterilization activity over time. As for the ability to biodegrade, PHB-TiO₂ composite films placed on soil surface with no direct solar illumination showed slower degradation rate compared to those receiving direct solar illumination. Interestingly, the latter composite films showed faster degradation rates compared to pure PHB films indicating that the degradation is mainly due to photocatalytic activity. PHB-TiO₂ composite films buried in soil generally showed slower degradation rates compared to pure PHB films and were dependent on the soil microbial activity.     

FTIR-ATR技术研究聚氨酯类文物保护材料的光降解

Polyurethanes are one kind of relic protection materials commonly used. During artificial photo-ageing, three polyurethanes, HDI-based polyurethane, MDI-based polyurethane and TDI-based polyurethane, have been considered to undergo UV radiation. Photochemical degradation of the polyurethanes has been monitored by means of Fourier transform infrared spectroscopy with attenuated total reflection accessory （FTIR-ATR）. It was proved that the mechanism of the photochemical degradation of polyurethanes might be the scissions of carbamate （urethane） groups and the re-reactions of radical groups formed in the scission reactions. From the experiment results HDI-based polyurethane, an aliphatic diisocyanate, could be considered to be more suitably used as relic protection materials among these three polyurethanes for its ageing products with less color.     

Study on flame-retardant mechanism of polycarbonate containing sulfonate-silsesquioxane-fluoro retardants by TGA and FTIR

The flame retardancy of bisphenol A polycarbonate (PC) containing potassium diphenylsulfone sulfonate (KSS), poly(aminopropyl/phenylsilsesquioxane) (PAPSQ) and poly(vinylidenefluoride) (PVDF) was measured by limited oxygen index (LOI) and examined according to UL94. A high LOI and UL94 V-0 rating for 1.6 mm thickness samples were obtained by a combined use of equivalent KSS, PAPSQ and PVDF at 0.1-0.3 wt% loading, respectively. The improvement in flame retardancy of PC compositions arose from the synergistic interaction of three additives. Thermogravimetric analysis (TGA) indicated that the combination decreased the activation energy (E) of PC degradation and elevated the thermal degradation rate of PC to ensure the formation of an insulating carbon layer. FTIR analysis showed that the LOI char of PC containing the three additives took on a highly cross-linking aromatic ester and ether structure.     

Thermal characterization and thermal degradation of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) synthesized by vinyl addition polymerization

The thermal properties and degradation behaviors of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) (PNB-dialkyl esters) (alkyl = Me (PNB-Me), Et (PNB-Et), Pr (PNB-Pr), and Bu (PNB-Bu)) were investigated by thermogravimetric analysis (TGA) in dynamic conditions and by infrared (IR) spectroscopy. The PNB-dialkyl esters show good thermal stability up to 350 °C, and the thermal stability decreases in the order Me > Et > Pr > Bu with the increase in size of side chain. The effect of side-chain size on the thermal degradation behaviors of PNB-dialkyl esters is evidenced by one-step thermal degradation profile for PNB-Me while two-step thermal degradation profile for PNB-Et, PNB-Pr, and PNB-Bu. Transformation is deduced to undergo β-hydrogen elimination and formation of anhydride group in the first stage of thermal degradation reaction according to TGA and IR results for PNB-Et, PNB-Pr, and PNB-Bu. The apparent activation energy and thermal degradation model of PNB-dialkyl esters are estimated by means of Ozawa-Flynn-wall method and Phadnis-Deshpande method, respectively.     

The effect of (natural) polyols on the initial colour of heavy metal- and zinc-free poly(vinyl chloride)

The propensity of (natural) polyols dispersed in heavy metal- and zinc-free PVC sheets to improve the initial colour, e.g. the colour during the first minutes of exposure to high processing temperatures (short-term stability), has been investigated. It is shown using W(Lab) values that the initial colour improves upon addition of polyols containing primary hydroxyl groups. The polyols act as HCl scavengers, presumably via an acid-catalysed S_N2 substitution of the primary hydroxyl groups by chloride ions. In contrast, polyols with only secondary or tertiary hydroxyl groups accelerate the thermal degradation of PVC. Notwithstanding, the efficacy of the (natural) polyols containing primary hydroxyl groups will be reduced if the polyol is susceptible to competitive acid-catalysed intramolecular cyclodehydration reactions under the processing conditions. This is substantiated by a comparison of the behaviour of mannitol and 3,4-di-O-methyl-d-mannitol. The methylated derivative, which is less prone to undergo intramolecular cyclodehydration, improves the initial colour of heavy metal- and zinc-free PVC sheets more significantly than mannitol itself.     

以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体

 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性．将20ml钛酸丁酯及30ml乙酐在密闭容器中与50ml环己烷混合，在70～85℃反应30min，生成微细的非晶钛氧有机物；经FT－IR和TGA分析，该物质被确认为计量式是TiOOOCCH3）2和TiO（OC4H9）（OOCCH3）的混合体．该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体．表征结果表明，钛氧有机物在焙烧过程中，其表面的吸附物及键合有机基团在400℃以前发生脱附和氧化分解；在389～405℃间形成锐钛矿型晶体，在600℃出现金红石晶型；600℃焙烧3h所得样品的比表面积为86m2／g，其二次粒子呈200～300nm条形体，孔隙大于20nm；单分散粒子为球形单晶，粒径为22nm；表面物理吸附水量为1．21％，加热至800℃时失重1．48％，粉体稳定纯净．光催化实验结果表明，以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性，光降解丁基罗丹明溶液的反应速率常数约为溶胶－凝胶法制备的催化剂样品的4倍．表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素．     

聚烯烃（聚乙烯）低温热氧化与降解

综述了近年来聚烯烃特别是聚乙烯的低温热氧化机理，动力学以及氧化降解研究现状及发展，指出现今低温热氧化与降解研究意义。