GTSP重钙工艺减少反应料浆含水量的初步研究

1 引言 我国耕地严重缺磷的面积所占比例高达2/3,而目前施肥的磷/氮比例又远远低于国际平均水平,如此的比例失调将严重影响农业增产.在当前施用的磷肥中,普钙和重钙占了很大的比例.由于重钙是用磷酸而非硫酸酸解磷矿,所以不含硫酸钙杂质,有效五氧化二磷的含量也由16～21%提高到45～52%,肥效比普钙提高两到三倍.为此国家"八五"重点项目引进了Hy dro GTSP工艺2×40万吨/年重钙装置.该装置于1999年3月试车以来难以达到满负荷生产. 作者通过对生产工艺各环节的分析,指出反应料浆含水量偏高是影响装置生产负荷的主要因素.料浆中水分的重要来源之一是二次球磨.     

Preparation and Characterization of Ceramic Hollow Microspheres for Heavy Metal Ion Removal in Wastewater

Ceramic hollow microspheres (CHMSs) were prepared to use as supports for the removal of heavy metal ions from industrial waste-water. A water extraction sol–gel technique was used to prepare porous CHMS by extracting water from an emulsion of LUDOX (silica colloid; SiO₂, Aldrich Co.) and 2-ethyl-1-hexanol. Experiments were conducted to control pore size, wall thickness, and separation yield by examining the ratio of precursors (LUDOX and 2-ethyl-1-hexanol), catalyst (NH₄OH), sintering temperature, surfactant (SPAN 80), extractant (n-butanol), stirring speed, and concentration of precursor (LUDOX). The results revealed that the optimum conditions were 20 ml of a 10 wt% solution of LUDOX, 10 ml of NH₄OH, a sintering temperature of 500°C, 0.4 ml of SPAN 80, 200 ml of n-butanol, and a stirring speed of 730 rpm/100 ml of 2-ethyl-1-hexanol. CHMSs were impregnated in Cyanex 272 and examined for their ability to remove heavy metal ions from a solution. Based on an experiment involving the removal of metal ions using CHMSs that were prepared under optimum conditions, Zn ion was removed at a level of 0.354 mmol/g at pH 4, which was about twice the adsorption capacity of CHMSs prepared by Wilcox (Mater. Res. Soc. Symp. Proc.346, 201 (1994)).     

Sorption and diffusion of water vapor in polyimide films

Sorption and diffusion of water vapor are investigated gravimetrically for polyimide films. The activity dependence of the solubility and diffusion coefficients, S and D, respectively, is classified under four types: (1) constant S and D type, (2) dual-mode sorption and transport type, (3) dual-mode type followed by a deviation due to a plasticization effect at high vapor activity, and (4) constant S and D type followed by a deviation due to water cluster formation at high activity. For the dual-mode type, the Henry's law component is much larger than the Langmuir component except at low activity, and therefore deviation in behavior from the first type is small. S is larger for polyimides with higher content of polar groups such as carbonyl, carboxyl, and sulfonyl. D is larger for polyimides with a higher fraction of free space, with some exceptions. The polyimide from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and dimethyl-3,7-diaminodibenzothiophene-5, 5-dioxide belongs to the third type and displays both large S and large D. The polyimide from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 4,4′-oxydianiline belongs to the fourth type, and has the largest D but rather small S because of the hydrophobic C(CF₃)₂ groups. © 1992 John Wiley & Sons, Inc.     

A boundary integral formulation for elastically deformable particles in a viscous fluid

This paper reports a formulation and implementation of a mixed (both direct and indirect) boundary element method using the double layer and its adjoint in a form suitable for solving Stokes flow problems involving elastically deformable particles. The formulation is essentially the Completed Double Layer Boundary Element Method for solving an exterior traction problem for the surrounding fluid or solid phase, followed by an interior displacement, and a mobility problem (if required) for the elastic particles. At the heart of the method is a deflation procedure that allows iterative solution strategies to be adopted, effectively opens the way for large-scale simulations of suspensions of deformable particles to be performed. Several problems are considered, to illustrate and benchmark the method. In particular, an analytical solution for an elastic sphere in an elongational flow is derived. The stresslet calculations for an elastic sphere in shear and elongational flows indicate that elasticity of the inclusions can potentially lead to positive second normal stress difference in shear flow, and an increase in the tensile resistance in elongational flow.This work is supported by a grant from the Australian Research Grant Council. X-J F wishes to acknowledge the support of the National Natural Science Foundation of China.     

实现水窗波段X射线激光的途径

研究了类氢、类氦、类锂和类钠离子等四种实现复合机制Ｘ射线激光的方案，对可能实现水窗波段Ｘ射线激光的几种方案比较，分析了其各种的优缺点，并讨论了可能的具体实验方法。     

Thermal aqueous liquid chromatography—the TALC technique

Thermal Aqueous Liquid Chromatography (TALC) using pure water as a mobile phase should be a very attractive technique promoting the use of liquid chromatography in routine analysis, either in the laboratory or in future on-line process control. This simple form of chromatography, the selectivity of which depends on the fixed phase only, would allow the use of flame ionization as an almost universal, low-cost detector in liquid chromatography. The potential of the TALC technique is illustrated by selected examples.     

Partial molar volumes of organic compounds in water. VI. α,ω-diaminoalkane hydrochlorides

Measurements of the partial molar volumes in water at 25°C of the mono-and dihydrochlorides of the ,-diaminoalkanes, up to a chain length of 10 carbon atoms, are reported. Volumes of ionization have been determined and the electrostriction of the solvent calculated. Effects of the substituents are felt up to the -carbon atom, but thereafter are only very weak or nonexistent.     

Analysis of multiparticle production data on proton-nucleus collisions using a new variable

Multiparticle production data on proton-nucleus collisions have been analyzed taking the number of ‘created’ charged particles instead of the observed number of shower particles as the variable. The mean normalized multiplicity,R _A , has been found to be independent of energy in the energy range (7–8000) GeV and its mass number dependence has been obtained. The modified analysis introduces some more regularities in the experimental results onp-nucleus collisions like the invariance with respect to energy of the relationshipR _A = α + βN _h and the KNO-like scaling of the multiplicity distributions of the created charged particles. The functional form of the scaling function has been calculated.     

The integral mean diffusivity for particle-gas mass transfer calculations under thermal plasma conditions

Plasma Chemistry and Plasma Processing - A new integral mean diffusivity is proposed for the calculation of the mass transfer rate around a small particle immersed in a thermal plasma gas....