Dual chemosensing properties of new anthraquinone-based receptors toward fluoride ions

Novel colorimetric receptors 1-[(2-hydroxy-5-bromo-benzylidene)-amino]-anthraquinone, 1-[(2-hydroxy-5-methyl-benzylidene)-amino]-anthraquinone, and 1-[(2-hydroxy-5-nitro-benzylidene)-amino]-anthraquinone have been synthesized as fluoride ion sensors. A color change was observed visually (naked-eye) upon addition of fluoride ions in organic solvents to solutions of the receptors.     

Novel separation method for highly sensitive speciation of cancerostatic platinum compounds by HPLC–ICP–MS

A high-performance liquid chromatography–inductively coupled plasma mass spectrometry (HPLC–ICP–MS) method is presented for analysis of cisplatin, monoaquacisplatin, diaquacisplatin, carboplatin, and oxaliplatin in biological and environmental samples. Chromatographic separation was achieved on pentafluorophenylpropyl-functionalized silica gel. For cisplatin, carboplatin, and oxaliplatin limits of detection of 0.09, 0.10, and 0.15 g L^–1, respectively, were calculated at m/z 194, using aqueous standard solutions. (3 L injection volume). The method was utilized for model experiments studying the stability of carboplatin and oxaliplatin at different chloride concentrations simulating wastewater and surface water conditions. It was found that a high fraction of carboplatin is stable in ultrapure water and in solutions containing 1.5 mol L^–1 Cl^–, whereas oxaliplatin degradation was increased by increasing the chloride concentration. In order to support the assessment of oxaliplatin eco-toxicology, the method was tested for speciation of patient urine. The urine sample contained more than 17 different reaction products, which demonstrates the extensive biotransformation of the compound. In a second step of the study the method was successfully evaluated for monitoring cancerostatic platinum compounds in hospital waste water.     

Platination of [3-X-7,8-Ph2-7,8-nido-C2B9H8] (X=Et, F): Synthesis and characterisation of slipped and 1,2→1,7 isomerised products

The reaction of the labelled carborane ligand [3-Et-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ with a source of {Pt(PMe₂Ph)₂}²⁺ affords non-isomerised 1,2-Ph₂-3,3-(PMe₂Ph)₂-6-Et-3,1,2-closo-PtC₂B₉H₈ (1). The analogous reaction between [3-F-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ and {Pt(PMe₂Ph)₂}²⁺ yields 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-F-2,1,8-closo-PtC₂B₉H₈ (3). Compound 1 has a heavily slipped structure (Δ 0.72 Å), which to some degree obviates the need for C atom isomerisation. However, that it is a kinetic product of the reaction is evident from the fact that it reverts to isomerised 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-Et-2,1,8-closo-PtC₂B₉H₈ (2) slowly at room temperature but more rapidly with gentle warming. The heteroatom and labelled-B atom positions in the isomerised compounds 2 and 3 may be explained most simply by the rotation of a CB₂ face of an intermediate based on the structure of 1. Compounds 1–3 were characterised by a combination of spectroscopic and crystallographic techniques.     

Atomic Force Microscopy Study of TiO2 Films Obtained by the Sol-Gel Method

Atomic Force Microscopy (AFM) was used to study the influence of thermal treatments on the structural and textural properties of the sol-gel TiO2 films obtained from Ti(OC3H7i)4. X-ray diffraction (XRD), ellipsometric and porosity measurements have also been made.The TiO2 sol-gel films were homogeneous, transparent and amorphous. Heat treatments in the 400–600°C range indicate that the films have a strong tendency to crystallization. The high initial homogeneity of the TiO2 films was preserved during the crystallization process. AFM shows that the thermally treated films exhibit uniform, monodispersed crystals.     

Copper (II) complexes of sterically hindered o-diphenol derivatives: synthesis, characterization and microbiological studies

Cu (II) complexes with the sterically hindered diphenol derivatives 3,5-di(tert-butyl)-1,2-benzenediol (I), 4,6-di(tert-butyl)-1,2,3-benzenetriol (II) and the sulfur-containing 4,6-di(tert-butyl)-3-(2-hydroxyethylsulfanyl)-1,2-benzenediol (III) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (IV) have been synthesized and characterized by elemental analysis, TG/DTA, FT-IR, ESR, XPS, XPD and conductivity measurements. Compounds I–III can coordinate in their singly deprotonated forms and act as bidentate ligands. These compounds yield Cu (II) complexes of the stoichiometry Cu(L)₂, which have square planar geometry (g_| > g_⊥ > g_e). Unlike them, compound IV behaves as a terdentate ligand, and its complex Cu(L^IV)₂ has distorted octahedral geometry. According to ESR data, only the Cu(L^II)₂ complex contains a very small amount of phenoxyl radicals. Antimicrobial activities of these ligands and their respective Cu (II) complexes have been determined with respect to Gram-positive and Gram-negative bacteria, as well as on yeasts. Their phytotoxic properties against Chlorella vulgaris 157 were also examined.     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

Ab initio crystal orbital studies on linear chains of H atoms

Anab initio crystal orbital method is used to calculate the energies of an infinite chain of H atoms and of linear arrangements of H₂ molecules with different interatomic distances. The H₂ arrangements are not stable in respect to isolated molecules. The cohesive energy of an optimized arrangement of H atoms chain is 0.0354 a.u.     

手性锌卟啉对咪唑类客体分子识别的构象研究

Chiral recognition is an attractive subject in the area of host-guest chemistry. Conformation study is performed to understand chiral recognition of zinc(Ⅱ) porphyrin with imidazole derivatives on a molecular level. The molecular recognition of three novel chiral zinc porphyrin(1-3) with four types of imidazole derivatives was studied. The conformation searching of this host-guest system was studied by using simulated annealing method on the basis of Tripos force field. The different minimal energy conformation of imidazole combind with porphyrin was studied. The quantum chemistry calculation was performed to calculate the single-point energies of the host-guest system. The minimal energy conformation of ZnT(o-BocAla)APP (3)-Im showed that Im attaching from the single-side chain of the host had the reasonable configuration than that from the three-side chain. The former also had the lower energy than the latter. And the quantum chemistry calculation results of orbital energy, ΔE_L-H, and atomic net charge revealed the same way. The results illumate that combination oriention of the host-guest system is the single chain of the hosts.