Pressurized liquid extracts from Spirulina platensis microalga. Determination of their antioxidant activity and preliminary analysis by micellar electrokinetic chromatography

In this work, different extracts from the microalga Spirulina platensis are obtained using pressurized liquid extraction (PLE) and four different solvents (hexane, light petroleum, ethanol and water). Different extraction temperatures (115 and 170 degrees C) were tested using extraction times ranging from 9 to 15 min. The antioxidant activity of the different extracts is determined by means of an in vitro assay using a free radical method. Moreover, a new and fast method is developed using micellar electrokinetic chromatography with diode array detection (MEKC-DAD) to provide a preliminary analysis on the composition of the extracts. This combined application (i.e., in vitro assays plus MEKC-DAD) allowed the fast characterization of the extracts based on their antioxidant activity and the UV-vis spectra of the different compounds found in the extracts. To our knowledge, this work shows for the first time the great possibilities of the combined use of PLE-in vitro assay-MEKC-DAD to investigate natural sources of antioxidants.     

RP-HPLC study of redox equilibria in vanadium-PAR binary and ternary systems: Direct determination of vanadium in steel

The reversed-phase high-performance liquid Chromatographic (RP-HPLC) behaviour of the binary chelates of V(V) and V(IV) with 4-(2-pyridylazo) resorcinol (PAR) and ternary chelates of vanadium with PAR and auxiliary ligands: hydrogen peroxide, hydroxylamine, tartrate and citrate were studied using a C₁₈ column. The complex double-peak chromatograms of V(IV)/V(V)-PAR systems were studied and the origin of each peak was proved. Vanadium in ternary systems with PAR and hydrogen peroxide was found exclusively in V(V)-H₂O₂-PAR complex (single peak on the chromatogram) despite its initial oxidation state. The double role of hydroxylamine (complex agent and reductor) in vanadium systems with PAR was confirmed: in the V(V) system three species were identified (V(V)-PAR, V(V)-NH₂OH-PAR and V(IV)-PAR), but in the V(IV) system only two: V(IV)-PAR and V(V)-NH₂OH-PAR. Citrate and tartrate giving single peak were found as auxiliary ligands in ternary V(V) systems of analytical importance. Due to its masking potential towards iron (III) ions, citrate was chosen as the most suitable third component of a ternary vanadium system with PAR, to form the basis of an RP-HPLC method for direct determination of V in steel.     

Insight into the cation–anion interaction in 1,1,3,3-tetramethylguanidinium lactate ionic liquid

In order to deepen the understanding of cation–anion interaction in ionic liquids (ILs), the structure and interionic interaction of 1,1,3,3-tetramethylguanidinium lactate ([tmg][L]) ion pair, including stable configuration, hydrogen bond, frontier molecular orbital, electron density, ion interaction energy and charge transfer, are studied by using ab initio calculations. It is found that more charge-localized character of [tmg][L], especially the C1 carbocation on [tmg]⁺, and the intermolecular –NH₂-associated hydrogen bonds can substantially increase the cation–anion interaction, the interaction energy is 65.3–109.3 kJ/mol higher than that of 1-n-butyl-3-methylimidazolium-based ILs. It is also found that the frontier molecular orbitals, i.e., the HOMO, HOMO + 1 of [L]⁻ and the LUMO, LUMO + 1 of [tmg]⁺, can effectively interact and more charges are transferred between cation and anion. Based on the above results, the physical property of ILs is discussed.     

Stereoselectivity of (−)-(1<Emphasis Type="Italic">R</Emphasis>,2<Emphasis Type="Italic">S</Emphasis>)-2-methylamino-1-phenylpropan-1-ol preparation

Stereoselectivity of reductive amination of (R)-1-hydroxy-1-phenylpropan-2-one by methylamine was studied. From the four isomers possible, only two are produced by this reaction. These are marked as (−)-(1R,2S)-ephedrine (desired product) and (+)-(1S,2R)-ephedrine. The reaction stereoselectivity depends both on the type of the catalyst and reaction conditions. The most suitable type is the supported platinum. However, this catalyst rapidly deactivates. With a decreasing activity of Pt catalyst, the stereoselectivity decreases. It is also decreased during the production of the second liquid phase (water) in the reaction mixture.     

Synthesis, characterization and thermal properties of small R2R2NX-type quaternary ammonium halides

Twenty-one R₂R^′₂N⁺X⁻ -type (R=methyl or ethyl, R^′=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with ¹H-NMR, ¹³C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. The thermal properties of all compounds were studied using TG/DTA and DSC methods. The smallest compounds decomposed during or before melting. The decreasing trend of melting points was observed when the alkyl chain length was increased. The liquid ranges of 120-180 °C were observed for compounds with 5-6 carbon atoms in the alkyl chain. The low melting points and wide liquid ranges suggest potential applicability of these compounds for example as ionic liquids precursors.     

Synthesis and characterization of novel epoxy monomers and liquid crystal thermosets

Four new epoxy monomers have been synthesized and characterized as part of a program to prepare novel liquid crystal thermoset (LCT) materials. Three of the new epoxy monomers contained a biphenyl mesogen and were not liquid crystalline (LC). The remaining epoxy monomer, which contained a 1,4-dibenzoyloxybenzene mesogen, was synthesized in an overall yield of 30% and displayed a broad (83°C) nematic liquid crystalline phase. The new liquid crystalline epoxy monomer was cured at 120°C and postcured at 175°C with a stoichiometric amount of 1,4-phenylenediamine. The thermal transitions of the resulting LCT were studied by differential scanning calorimetry (DSC), polarized light optical microscopy (POM), thermomechanical analysis (TMA), and wide angle x-ray diffraction (WAXD) as a function of cure time and temperature. A process characterization diagram was constructed which shows that LCTs based on this new LC monomer can be processed in the liquid crystalline phase over a broad range of times and temperatures. Qualitative agreement with previous epoxy LCT results was found, as LCT's with smectic phases and without clearing temperatures were observed at long cure times (high crosslink densities), whereas nematic phases with clearing temperatures predominated in networks at short cure times (low crosslink densities). © 1993 John Wiley & Sons, Inc.     

Influence of a water vapor admixture in the carrier gas on capacity coefficients of polar organic compounds

The influence of a water vapor admixture in helium, nitrogen, and carbon dioxide on capacity coefficients of C₃−C₅ alcohols and pyridine during chromatography process in capillary columns with polar (PEG-20M) and nonpolar (SE-30) stationary phases was studied. The introduction of a water admixture into the carrier gas, increases the capacity coefficient of polar organic compounds on the capillary column with PEG-20M and has almost no effect on this value in the case of SE-30. The change in retention of polar organic compounds on the capillary column with the PEG-20M polar phase occurs due to a change in the properties of the stationary phase when it adsorbs water from the mobile phase. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2258–2261, November, 1998.     

HPLC separation of hydrogenated derivatives of buckminsterfullerene

Summary The effect of composition and flow rate of the mobile phase on the HPLC separation of hydrogenated buckminsterfullerene (C₆₀H_n n=2–38) was investigated on BuckySep column. Toluene was used as the basic solvent and hexane, heptane, cyclohexane, THF, acetonitrile, acetone, ethanol and 2-propanol as co-solvents. The fraction of co-solvents was varied 10–80%, and the flow rate 1–0.1 mL min⁻¹. Toluene-acetonitrile 65∶35 and toluene-acetone 50∶50 provided the best separation. Under the best conditions complete separation of C₆₀H₂ and almost complete separation of the four most abundant isomers of C₆₀H₄ were achieved. Separation of derivatives with higher hydrogen content was very poor. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Capillary liquid chromatography as a tool for separation of hydrophobic basic drugs. Relation between tests for column characterization and real analysis

Two capillary columns for reversed phase (RP) capillary liquid chromatography (CLC), viz. Nucleosil 100‐5 C18 and LiChrosorb RP‐select B, were characterized by the Walters test, i.e. the chromatographic test proposed for RP stationary phases. Hydrophobicity indices were determined not only in acetonitrile/water mobile phase, as proposed in the test, but they were also measured in buffered systems. This approach was used to quantify the influence of mobile phase composition on the modification of the surface of the stationary phases. In the next step, small basic compounds differing in their hydrophobicity and basicity were selected and their retention on the stationary phases in mobile phases of the same composition as used for column testing was examined. Furthermore, the retention of newly synthesized drugs, chemotherapeutics derived from thioacridine and pyridoquinoline, differing in their structures, basicity, and hydrophobicity, was also studied. The composition of the mobile phases had to be shifted to higher contents of organic modifiers – acetonitrile or methanol – in order to elute these hydrophobic compounds from the columns. The question we wanted to answer was: How is the method for testing of reversed phases related to retention, separation efficiency, and peak symmetry of various analytes?     

Analysis of Terbumeton and its Major Metabolites by SPE and DAD-HPLC in Soil Bulk Water

A rapid and inexpensive method for simultaneous quantification of terbumeton (TER), and its major potential metabolites (TED; terbumeton-desethyl, TOH; terbumeton-2-hydroxy and TID; terbumeton-deisopropyl) in soil bulk water (SBW) samples is proposed. The analytical method involves extraction–concentration from SBW samples using a graphitized carbon black (GCB) cartridge followed by their separation–detection by reversed-phase high-performance liquid chromatography analysis using a C₁₈ column and a diode array detector. A mobile phase of acetonitrile−0.005 mol L⁻¹ phosphate buffer (pH 7.0) (35:65, v/v) at a flow rate of 0.8 mL min⁻¹ in isocratic elution mode has been used. After optimization of the extraction and separation conditions, this method can be used for the simultaneous determination of investigated compounds in the range of the international limits of 0.1 μg L⁻¹. For TER the detection limit was 0.009 μg L⁻¹ and it was 0.100, 0.550, and 0.480 μg L⁻¹ for TED, TOH, and TID, respectively. The recoveries of TER, TED, TOH, and TID from SBW samples, measured at three levels of concentration range, were found to be between 48.0 and 102.0%. The intra-day precision measured by relative standard deviation (RSD) was always lower than 9.0%.