Influence of metal ion on chelate–aryl stacking interactions

CCSD(T)/CBS and DFT methods are employed to study the stacking interactions of acetylacetonate‐type (acac‐type) chelates of nickel, palladium, and platinum with benzene. The strongest chelate–aryl stacking interactions are formed by nickel and palladium chelate, with interaction energies of −5.75 kcal mol⁻¹ and −5.73 kcal mol⁻¹, while the interaction of platinum chelate is weaker, with interaction energy of −5.36 kcal mol⁻¹. These interaction energies are significantly stronger than stacking of two benzenes, −2.73 kcal mol⁻¹. The strongest nickel and palladium chelate–aryl interactions are with benzene center above the metal area, while the strongest platinum chelate–aryl interaction is with the benzene center above the C2 atom of the acac‐type chelate ring. These preferences arise from very different electrostatic potentials above the metal ions, ranging from very positive above nickel to slightly negative above platinum. While the differences in electrostatic potentials above metal atoms cause different geometries with the most stable interaction among the three metals, the dispersion (correlation energy) component is the largest contribution to the total interaction energy for all three metals.     

Adsorption of a cationic water-soluble dye onto cationic Langmuir–Blodgett films via nano clay platelets: An efficient approach to control the H-dimer

This communication reports the successful adsorption of a water-soluble cationic fluorescent dye Acridine Orange (AO) onto Langmuir–Blodgett (LB) films of a cationic amphiphile octadecylamine (ODA) in the presence of nano-clay platelets hectorite. Acridine orange (AO) has been widely used as a stainer for the characterization of biopolymers. But AO has a tendency to form non-florescent H-dimer even in the aqueous solution. Anionic nano-clay platelets hectorite played an important role in controlling the H-dimer formation of AO in the hybrid film. Effects of various parameters in the adsorption process were investigated in detail.     

Mixed Boron(III) and Phosphorous(V) Complexes of meso‐Triaryl 25‐Oxasmaragdyrins

Two unprecedented mixed B^III/P^V complexes of meso‐triaryl 25‐oxasmaragdyrins were synthesized in appreciable yields under mild reaction conditions. These unusual 25‐oxasmaragdyrin complexes containing one or two seven‐membered heterocyclic rings comprised of five different atoms (B, C, N, O, and P) were prepared by reacting B(OH)(Ph)‐smaragdyrin and B(OH)₂‐smaragdyrin complexes, respectively, with POCl₃ in toluene at reflux temperature. The products were characterized by HRMS and 1D‐ and 2D‐NMR spectroscopy. X‐ray crystallography of one of the mixed B^III/P^V smaragdyrin complexes indicated that the macrocycle is significantly distorted and contains a stable seven‐membered heterocyclic ring within the macrocycle. The bands in the absorption and emission spectra were bathochromically shifted with reduced quantum yields and singlet‐state lifetimes relative to the free base, meso‐triaryl 25‐oxasmaragdyrin. The mixed B^III/P^V complexes were difficult to oxidize but easier to reduce than the free base. The DFT‐optimized structure of the 25‐oxasmaragdyrin complex with two seven‐membered heterocycles indicated that it was a bicyclic spiro compound with two half‐chair‐like conformers. This was in contrast to the chair‐like conformation of the complex with a single seven‐membered heterocyclic ring. Moreover, incorporation of a second phosphate group in the former case stabilized the bonding geometry and resulted in higher stability, which was reflected in the bathochromic shift of the absorption spectra, more‐positive oxidation potential, and less‐negative reduction potential.     

淀粉样蛋白聚集纤维化的抑制作用研究

总结了不同抑制剂对淀粉样蛋白聚集及纤维化的抑制作用,主要介绍了金属配合物作为淀粉样蛋白抑制剂的研究,并概述了淀粉样蛋白相互作用体系的热力学研究进展.     

A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding

The design of the mold and the choice of the injection parameters for metal injection molding (MIM) is required to maintain homogeneity of the filled mixture. However, powder segregation is unavoidable in MIM because of the significant difference in densities of the metallic powder and the polymer binder. To achieve an effective prediction of segregation effect, a biphasic model based on mixture theory is employed. The viscous behaviors of each phase and the interaction coefficient between the flows of the two phases should be determined. The solution of two coupled Navier–Stokes equations results in a tremendous computation effort. The previous development of an explicit algorithm makes the biphasic simulation much faster than that of the classic methods. However, it is strongly desired to reduce or even eliminate the numerous global solutions for pressure fields at each time step. Hence, a new vectorial algorithm is proposed and developed to perform the simulation only by vectorial operations. It provides the anticipated efficiency in the simulation of biphasic modeling, and the advantage to use the classic elements of equal‐order interpolations. Some results produced by the two algorithms are compared with the experimental values to validate the new vectorial algorithm. Copyright © 2012 John Wiley & Sons, Ltd.     

Novel organometallic chalcones functionalized with a crown ether fragment as optical ion chemosensors

We previously reported the synthesis and characterization of new organometallic chalcones derived from ferrocene, cyrhetrene and cymantrene functionalized with a benzo‐15‐crown‐5 fragment. The ferrocene and cyrhetrene chalcones have been investigated as chemosensors for metal ions with optical response in acetonitrile. Several metal ions were selected considering the diameter of the cavity and the charge‐to‐radius ratio of the cation. The stoichiometry of the complexes was determined using Job's method. It was found that Na⁺ and Ca²⁺ complexes have a 1:1 stoichiometry while a 2:1 (metaloligand‐to‐cation) stoichiometry was determined for Ba²⁺ and Pb²⁺ complexes. The association constants were calculated according to the stoichiometry of the complex and the results showed that they are directly affected by the electron‐withdrawing nature of the organometallic fragment. Moreover, complexes of ferrocenyl chalcone have larger association constants than those of the cyrhetrenyl analogue. This experimental observation is consistent with the electronic properties of the ferrocenyl fragment.     

Fabrication of large-scale ripples on fluorine-doped tin oxide films by femtosecond laser irradiation

The large-scale uniform self-organized ripples are fabricated on fluorine-doped tin oxide （FTO） coated glass by femtosecond laser. They can be smoothly linked in a horizontal line with the moving of XYZ stage by setting its velocity and the repetition rate of the laser. The ripple-to-ripple linking can also be realized through line-by-line scanning on a vertical level. The mechanism analysis shows that the seeding effect plays a key role in the linking of ripples.     

Cobalt‐based metal coordination polymers with 4,4′‐bipyridinyl groups: highly efficient catalysis for one‐pot synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions

Three new metal coordination complexes, namely [Co(BPY)₂(H₂O)₂](BPY)(BS)₂(H₂O)₄ ( 1 ), [Co(BPY)₂(H₂O)₄](ABS)₂(H₂O)₂ ( 2 ) and [Co(BPY)(H₂O)₄](MBS)₂ ( 3 ) (BPY = 4,4′‐bipyridine, BS = phenylsulfonic acid, ABS = p‐aminobenzenesulfonic acid, MBS = p‐methylbenzenesulfonic acid), were obtained under hydrothermal conditions. Complexes 1 , 2 , 3 were structurally characterized using single‐crystal X‐ray diffraction and infrared spectroscopy. All of them display low‐dimensional motifs: complex 1 displays a two‐dimensional structure; and complexes 2 and 3 exhibit a one‐dimensional tape structure. Through strong intermolecular hydrogen bonding interactions and weak packing interactions, all of them further stack to generate a three‐dimensional supramolecular architecture. Catalysts 1 , 2 , 3 were involved in the green synthesis of a variety of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions through Biginelli reactions. The corresponding catalytic product was obtained in quantitative yields (99%) under eco‐friendly synthesis conditions for the variety of reactions. Catalysts 1 , 2 , 3 exhibit excellent efficiency for the desired product, and their catalytic performance shows the following order: 2  >  1  ≈  3 , which can be ascribed to the hydrophobic interactions of different phenylsulfonate groups. The catalytic performance for the Biginelli reaction is not only dependent on the selected solvents, but also inversely proportional to the polarities of the solvents. Copyright © 2016 John Wiley & Sons, Ltd.     

Formation of homogeneous nanocomposite films at ambient temperature via miniemulsion polymerization using graphene oxide as surfactant

A convenient and industrially scalable method for synthesis of homogeneous nanocomposite films comprising poly(styrene‐stat‐butyl acrylate) and nanodimensional graphene oxide (GO) or reduced GO (rGO) is presented. Importantly, the nanocomposite latex undergoes film formation at ambient temperature, thus alleviating any need for high temperature or high pressure methods such as compression molding. The method entails synthesis of an aqueous nanocomposite latex via miniemulsion copolymerization relying on nanodimensional GO sheets as sole surfactant, followed by ambient temperature film formation resulting in homogeneous film. For comparison, a similar latex obtained by physical mixing of a polymer latex with an aqueous GO dispersion results in severe phase separation, illustrating that the miniemulsion approach using GO as surfactant is key to obtaining homogeneous nanocomposite films. Finally, it is demonstrated that the GO sheets can be readily reduced to rGO in situ by heat treatment of the film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2289–2297