Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Simple synthesis of aminoquinoline/ethylaniline copolymer semiconducting nanoparticles

Pure copolymer nanoparticles from 8-aminoquinoline (AQ) and 2-ethylaniline (EA) were easily synthesized by a chemically oxidative polymerization in three different aqueous media. The potential and temperature of polymerization solution were used to successfully follow the polymerization progress. The molecular and morphological structures of the resulting AQ/EA copolymer particles were systematically characterized by IR, UV/Vis, NMR, gel permeation chromatography, laser particle-size analysis, atomic force and transmission electron microscopy. The oxidation potential of the monomers as well as the polymerization yield, structure, and properties of the particles were found to significantly depend on AQ/EA ratio, polymerization temperature and medium. It is surprisingly found that AQ homopolymerization and AQ/EA (50:50) copolymerization at 5 degrees C in HCl simply afford nano-ellipsoids with the major/minor axis diameters of 24/14 nm and 80/67 nm, respectively. A simple method of synthesizing semiconducting pure nanoparticles by introducing the AQ units with positively charged quaternary ammonium groups but in the absence of adscititious stabilizer or sulfonic substituent on the monomers is established first. Both the molecular weight and bulk electroconductivity of the copolymers exhibit a maximum at AQ content of 10 mol %. The solubility and film formability of the copolymers are good in highly polar solvents and reach the optimal at the AQ content of 20 and 10 mol %, respectively.     

Heterogeneous ECE Processes at Channel Electrodes: Analytical Solution for all Reaction Rate Constants and Different Diffusion Coefficients

An analytical solution is developed for heterogeneous ECE processes occurring at channel electrode surface for both laminar and turbulent flow. The solution explicitly links the behavior of ECE processes and the parameters. A simple expression of the effective number of electrons transferred, covering all the reaction rate constants and different diffusion coefficients of the reactant A and the intermediate product B, is obtained. Excellent agreement with previous numerical and analytical results is shown . Parametric studies illustrate the effects of diffusion coefficients, hydrodynamic factors and reaction rate constants on the effective number of electrons transferred and the currents.     

Electrochemical Preparation of Poly(Malachite Green) Film Modified Nafion‐Coated Glassy Carbon Electrode and Its Electrocatalytic Behavior Towards NADH,Dopamine and Ascorbic Acid

Poly(malachite green) film modified Nafion‐coated glassy carbon electrodes have been prepared by potentiodynamic cycling in malachite green solution. The pH of polymerisation solution has only minor effect on film formation. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the growth of the poly(malachite green) film. Cyclic voltammogram of the poly(malachite green) film shows a redox couple with well‐defined peaks. The redox response of the modified electrode was found to be depending on the pH of the contacting solution. The peak potentials were shifted to a less positive region with increasing pH and the dependence of the peak potential was found to be 56 mV per pH unit. The electrocatalytic behavior of poly(malachite green) film modified Nafion‐coated glassy carbon electrodes was tested towards oxidation of NADH, dopamine, and ascorbic acid. The oxidation of dopamine and ascorbic acid occurred at less positive potential on poly(malachite green) film compared to bare glassy carbon electrode. In the case of NADH, the overpotential was reduced substantially on modified electrode. Finally, the feasibility of utilizing poly(malachite green) film electrode in analytical estimation of ascorbic acid was demonstrated in flow injection analysis.     

New understanding of the nature of OH adsorption on Pt(1 1 1) electrodes

The adsorption of hydroxyl on Pt(1 1 1) single crystal electrodes from aqueous acidic solutions is carefully reinvestigated. The effect of small additions (10⁻⁸–10⁻⁵ M) of chloride and bisulphate anions on the OH adsorption region in perchloric acid solution has been studied. Two regions can be differentiated in the voltammetric profile, that behave differently after the addition of the foreign anion. The initial broad adsorption process is unaffected until the highest concentration is attained. However, the sharper peak at higher potentials is affected even at the lower anion concentration. Since mass transport limitations allow to discard the anion adsorption as the main process giving this peak, we propose that the two processes are due to the dissociative adsorption of two different kinds of water, that are affected by the anion in a different way. From this idea, a new model, based on the Frumkin adsorption isotherm, is proposed, which gives an excellent fit of the experimental results.     

Study of the Behavior of an EC Mechanism Using Cyclic and Derivative Chronopotentiometric Techniques with Spherical Electrodes

The theory for an EC mechanism in chronopotentiometric techniques – reversal chronopotentiometry, cyclic chronopotentiometry and reciprocal derivative chronopotentiometry – is developed. The equations of this article are valid for spherical electrodes of any size and present a compact and easy‐to‐manage form. Methods for determining kinetic parameters of the chemical reaction are proposed and the influence of the electrode radius is discussed. We conclude that large errors in the determination of these parameters are committed if electrode sphericity is neglected. Reciprocal derivative chronopotentiometry has been applied in its traditional form (dt/dE vs. E), and in a more recently proposed modality consisting of plotting dt^1/2/dE vs. E. These techniques are very convenient for studying an EC mechanism since the response is obtained in the form of peaks which are quantitatively related to the kinetic parameters of the chemical reaction. A comparison of the chronopotentiometric methods analyzed leads us to conclude that working curves based on the dt^1/2/dE vs. E curves are more suitable to obtain accurate values of the rate constants of the chemical reaction.     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

纳米银自组装电极的制备及对高氯酸二茂铁的电化学响应

采用自组装的方法制备了纳米银粒子修饰金电极,并运用循环伏安法、交流阻抗谱探讨了该电极的电化学特性.研究了高氯酸二茂铁在该修饰电极上的直接电化学行为.实验结果表明,高氯酸二茂铁在该修饰电极上具有良好的电流响应.用示差脉冲法测定高氯酸二茂铁,其氧化峰电流与浓度在4.0×10-6～5.0×10-4 mol/L范围呈良好线性关系,线性方程为:Ip(μA)=0.0236c(μmol/L)-0.0975,线性相关系数为0.9982,检出限为2.3×10-7 mol/L(信噪比为3).     

导电高分子材料的应用和进展

论述了复合型及结构型导电高分子材料的导电机理、应用和研究进展。