Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Rheological and thermal properties of agarose aqueous solutions and hydrogels

In this article, we report on the rheological properties of agarose aqueous solutions and gels. Viscosity curves were determined for homogeneous agarose aqueous solutions at different temperatures (from 68 to 38 °C) to study the viscosity behavior as the systems undergo gelation. The gelation phenomenon of agarose solutions was also investigated by shear oscillation experiments and differential scanning calorimetry. The gelation and melting temperature as a function of agarose concentration were determined together with the gelation and melting enthalpies. The results obtained were interpreted using the two‐step model describing the gelation of agarose in water. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 322–328, 2008     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Formation of niobium oxynitrides by rapid thermal processing (RTP)

The potential of rapid thermal processing (RTP) for the preparation of thin films of niobium oxynitrides was investigated. The 200 and 500 nm niobium films were deposited via sputtering on oxidized silicon(1 0 0)- and on sapphire(1 −1 0 2)-substrates. At first, oxidation of niobium films in molecular oxygen and then nitridation in ammonia using an RTP-system was performed. The films were characterized before and after the oxidation and nitridation processes by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and secondary ion mass spectrometry (SIMS). The influence of the two different substrates, amorphous SiO₂ and single crystalline sapphire on the reactivity of the niobium films was studied in dependence of temperature, time of reaction and film thickness. The existence of niobium oxynitride formation was verified for some of the films. In some of the experiments, crack formation in the films or even delamination of the Nb-films from the substrates was observed.     

Precursor memory effect determining structural properties of sulfated zirconia

Properties of two catalysts tailored in the laboratory conditions by sulfation of commercial Zr-hydroxide and Zr-hydroxide of nitrate origin were compared with those of commercial SO₄-Zr-hydroxide. Equally thermally treated samples in the temperature interval 500–700°C, and having the same amount of sulfur, show different properties indicating memory effect of their solid parent materials. The catalyst obtained by sulfation of commercial Zr-hydroxide differs in amount of residual sulfates upon calcination from other two catalysts. The instability of sulfates in the previous case might be connected to the lowest surface area values of catalyst and the highest fraction of monoclinic phase observed at all applied calcination temperatures.     

Synthesis and characterization of a series of diverse poly(2‐oxazoline)s

This article describes the synthesis and characterization of a variety of new poly(2‐oxazoline)s. With regard to functional polymers, 2‐oxazolines represent an interesting class of monomers because of the easy variation of the substituent in 2‐position. Starting from the corresponding nitriles, different 2‐oxazolines were obtained containing a diverse set of 2‐substituents, including thioether bonds ( M11 ), trifluoromethyl groups ( M8 , M10 ), and alkyl‐ or aryl groups ( M1 – M7 ). The subsequent polymerization of the majority of these monomers proceeded in a living manner, which was demonstrated by linear first‐order kinetics, a linear increase of molar mass with conversion, and relatively narrow molar mass distributions. In addition, selected thermal and surface properties of the polymers were studied utilizing DSC and contact‐angle measurements to determine the effects of different 2‐substituents on the macroscopic properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3829–3838, 2009     

Effects of molecular mass and surface treatment on adsorbed poly(methyl methacrylate) on silica

The behavior of relatively monodisperse adsorbed poly(methyl methacrylate) (PMMA) samples, from 19 to 587 kDa on silica, was studied using modulated differential scanning calorimetry and FTIR. On untreated Cab? O? Sil silica, the glass transition temperatures (T_gs) were higher (by around 30 °C), and the transitions were significantly broader (by a factor of 5–6) than those for the corresponding bulk samples. While the T_gs for the bulk polymers showed the expected dependence on molecular mass, the polymers on untreated silica showed little dependence, i.e., at the same adsorbed amounts, the glass transitions were very similar. The FTIR spectra of the adsorbed PMMA (on untreated silica) showed the presence of at least two resonances, one for the bound (hydrogen bonded to surface silanols) and another for free carbonyls. Fitting of the spectra allowed the estimation of the bound fractions of carbonyls that were dependent on the adsorbed amount, but not molecular mass. On Cab? O? Sil treated with hexamethyldisilizane (HMDS), the adsorbed PMMA exhibited glass transition behavior with little molecular‐mass dependence; the T_gs for the different PMMA samples were very similar to those of the high‐molecular mass bulk polymer, but with additional broadening of about a factor of 2. FTIR spectra for the PMMA samples on the treated silica did not show significant amounts of any of the hydrogen‐bonded carbonyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 649–658, 2008     

Synthesis and optoelectronic properties of alternating benzofuran/terfluorene copolymer with stable blue emission

The solution processable alternating benzofuran/terfluorene copolymer bearing side oxadiazole groups ( PBF‐OXD ) was synthesized and its optoelectronic properties and color stability were investigated. Electron‐deficient and stereohindered oxadiazole units were used as pendent groups to compensate for the poor electron‐transporting ability of a p‐type polymer backbone, to depress the intermolecular π‐stacking, and to improve solubility while retaining polymer blue emission. PBF‐OXD showed a glass transition at 135 °C and an onset decomposition temperature of ～345 °C. A simple EL device, with the configuration of ITO/PEDOT:PSS/ PBF‐OXD /Ba/Al, displayed a stable blue emission (λ_max = 434 nm), good color purity (full width half‐maximum = 59 nm), maximum brightness of 1400 cd/m², and a maximum luminance efficiency of 0.95 cd/A. The PL and EL spectra changed slightly on annealing and on increasing the applied voltage. These results show that the as‐synthesized copolymer PBF‐OXD had integrated respective functions of its different building blocks and exhibited good thermal and color stability with improved EL performance. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5488–5497, 2009     

Structure–property relationship of photoactive liquid crystalline polyethers containing benzylidene moiety

A series of main chain photoactive liquid crystalline polyethers, containing rigid bisbenzylidene photoactive mesogen and flexible methylene spacers, were synthesized by polycondensation of bisbenzylidene diols and dibromoalkanes. The polyethers were characterized with ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimeter (DSC), thermo gravimetric analyzer (TGA), and polarized light optical microscopy. The individual and combined effects of spacer length and number of methoxy substituents on mesogenic and photoactive properties were investigated. Both first order and second order transition temperatures decreased with increased spacer length and the number of substituents. The combined effect of spacers and substituents drastically reduced the transition temperatures. All monomers and polymers showed mainly the smectic mesophase. In a few cases, nematic droplets along with the smectic phase were observed. The width of the liquid crystalline phase reduced with an increasing number of methoxy substituents on mesogenic unit. Variation of spacer length has a negligible effect on photocycloaddition. However, steric hinderance caused by the substituents decreased the photoactivity as the number of substituents increased. Total energies of crosslinked dimers calculated from modeling studies supported the above findings. Intermolecular photocycloaddition was also confirmed by photoviscosity measurement. The refractive index change was found to be in the range of 0.017–0.031. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2143–2155, 2009     

A ring-source method to measure the thermal diffusivity of a conducting specimen in forced air flow: Study on aluminium

Summary Thermal diffusivity is obtained with an accuracy of ∼ 1% by means of a new simple method, in which two parallel disks (of chromel and alumel, respectively) surround the middle section of a cylindrical specimen of conducting material. The disks act in the clamped zone as the hot juction of a thermocouple and, at the same time, as a heat source for the specimen, subjected to a laminar air flow. A second thermocouple placed at the base of the cylinder accomplishes acquisition of another set of experimental data from which the thermal diffusivity and the surface heat loss coefficient can be determined. Preliminary measurements on aluminium 99.999% consistent with literature data have been reported. Work supported by the Ministero della Pubblica Istruzione of the Italian Goverment.