电控发动机喷油脉宽的分析

本文介绍了利用喷油脉宽大小的变化来分析电控发动机电控系统、燃油供给等系统故障的一种方法,在汽车故障检测与诊断中有着广泛的应用。     

用于快点火研究的超短脉冲的相干合成

 利用傅里叶光学方法，建立了一个基于远场的多束超短脉冲相干合成的理论模型。研究了一个口径为50 cm，脉宽为1 ps的超短脉冲相干合成系统的各种误差对脉冲远场时域和空域特性的影响。结果表明：若要求远场的一倍衍射极限区域的积分能量分布达到理想情况下的90％，该系统的相位延迟误差小于0.63，沿x方向角度误差小于0.37 μrad，沿y方向角度误差小于0.34 μrad；若要求远场叠加脉冲的时域展宽小于25％，系统的剩余啁啾因子应小于1.32(不考虑相位延迟)或1.52(考虑0.63的相位延迟)。     

金锥对靶背向超热电子分布的影响

 采用20 TW啁啾脉冲放大的ps激光辐照金锥靶和平面靶，对靶背向产生的超热电子角分布和能谱进行了实验研究。结果表明:金锥对超热电子的产生具有重要的影响。与平面靶情况相比，锥形靶靶背向产生的超热电子数量增加，电子能量为2.0~2.5 MeV的超热电子数目有大幅度增长；锥形靶背向超热电子的空间发散角大于平面靶,这是由于啁啾脉冲放大激光所固有的较高脉冲前沿产生的预等离子体造成的影响。     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

Predicting vibration signals of automobile engine using chaos theory

Condition monitoring and life prediction of the vehicle engine is an important and urgent problem during the vehicle development process. The vibration signals that are closely associated with the engine running condition and its development trend are complex and nonlinear. The chaos theory is used to treat the nonlinear dynamical system recently. A novel chaos method in conjunction with SVD (singular value decomposition)denoising skill are used to predict the vibration time series. Two types of time series and their prediction errors are provided to illustrate the practical utility of the method.     

三维电子散斑干涉技术及其应用研究

通过大错位剪切镜和一作为参考物的压电陶瓷相移器将三个电子散斑干涉系统组成一新的三维电子散斑干涉系统。利用该系统，结合相移技术和图像处理技术，可得到独立的位移场(u,v和w场)。该技术的特点是用三个激光器作为光源，一个压电陶瓷相移器产生参考光并实现相移，CCD摄像机前放置大错位剪切镜以使物光和参考光产生干涉。将该技术应用到柴油发动机零部件测量上，得到了主轴承孔周的三维位移场。     

双组元姿控发动机反流特性的DSMC模拟

为准确获得双组元姿控发动机的羽流及其反流特性,采用直接模拟蒙特卡罗(DSMC)方法结合可变软球(VSS)模型数值模拟以N2O4/MMH为推进剂的真空羽流。喷口参数由喷管流动的DSMC法计算得到。与文献比较表明本文计算程序可信。模拟结果表明,分子质量越小的气体越容易进入反流区;本文的计算条件下,在偏离X轴正向116°~140°范围内,组分数密度和质量流率以及温度均出现了最大值。     

Advanced kinetic tools for the evaluation of decomposition reactions

Summary An advanced kinetic study on the thermal behaviour of pyrotechnic ignition mixtures has been carried out by differential scanning calorimetry using different B/KNO3 mixtures (50:50, 30:70, 20:80) as a model reaction. The experimental conditions applied (isochoric conditions/closed crucibles and isobaric conditions/open crucibles) as well as the composition of the mixtures noticeably influences the relative thermal stabilities of the energetic materials. The kinetic study focused on the prediction of the thermal stability of the different mixtures both in extended temperature ranges and under temperature conditions at which ordinary investigation would be very difficult. Using advanced numerical tools [1], thermal ageing and influence of the complex thermal environment on the heat accumulation conditions were computed. This can be done for any surrounding temperature profile such as isothermal, non-isothermal, stepwise, modulated, shock, adiabatic conditions and additionally for temperature profiles reflecting real atmospheric temperature changes (yearly temperature profiles of different climates with daily minimal and maximal fluctuations). Applications of accurate decomposition kinetics enabled the determination of the time to maximum rate under adiabatic conditions (TMR_ad) with a precision given by the confidence interval of the predictions. This analysis can then be applied for the examination of the effects of the surrounding temperature for safe storage or transportation conditions (e.g. determination of the safe transport or storage temperatures).     

2-乙基己基磷酸单(2-乙基己基)酯萃淋树脂分离-火花源质谱法测定高纯氧化镱中痕量稀土杂质

本文采用萃取色谱法以2-乙基已基膦酸单(2-乙基已基)酯(P_507)萃淋树脂为固定相,以HCI-NH_4CI体系为淋洗液,研究了99.999%~99.9999%的高纯Yb_2O_3中稀土杂质和Yb基体的分离条件,将杂质淋洗液富集于复合螯合剂-活性碳上,经灼烧灰化后制成样品电极,进行质谱测定.测定下限达 0.01~0.05 μg/g,可用于高纯 Yb_2O_3中杂质的测定.回收率在80%以上.     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.