Spectrum of Single-Photon Scattering in a Strong-Coupling Hybrid Optomechanical System

The single-photon excitation and transmission spectra of strong-coupling hybrid optomechanics are theoretically analyzed, where a two-level system (TLS) is coupled to a mechanical resonator (MR), generating Jaynes–Cummings-type polariton doublets. In this model, both the optomechanical coupling and the TLS-MR coupling are strong. In this parameter region, polaron-assisted excitation reemission processes can strongly affect the single-photon excitation and output spectra of the cavity. It is found that the fine structure around each sideband can be used to characterize the TLS-MR and the effective TLS-photon couplings, even at the single-quantum level. Thus, the spectrum structures may make it possible to sensitively probe the quantum nature of a macroscopic mechanical element. A possible approach for tomographic reconstruction of the state of a TLS, utilizing the single-photon transmission spectra, is further provided.     

Multifunctional material Bi4Ge3O12: thermodynamic properties

Thermodynamic characteristics of a single crystal of bismuth orthogermanate (Bi₄Ge₃O₁₂), which are necessary to improve device portfolio, have been studied. It has been shown that bismuth orthogermanate is thermodynamically stable against decomposition into binary oxides at 50 °C, which gives us grounds to consider this compound promising for various applications.     

Enhanced headspace single drop microextraction method using deep eutectic solvent based magnetic bucky gels: Application to the determination of volatile aromatic hydrocarbons in water and urine samples

A facile headspace single drop microextraction method was developed using deep eutectic solvent‐based magnetic bucky gel as the extraction solvent for the first time. The hydrophobic magnetic bucky gel was formed by combining choline chloride/chlorophenol deep eutectic solvent and magnetic multiwalled carbon nanotube nanocomposite. Magnetic susceptibility, high viscosity, high sorbing ability, and tunable extractability of organic analytes are the desirable advantages of the prepared gel. Using a rod magnet as a suspensor in combination with the magnetic susceptibility of the prepared gel resulted in a highly stable droplet. This stable droplet eliminated the possibility of drop dislodgement. The prepared droplet made it possible to complete the extraction process in high temperatures and elevated agitation rates. Furthermore, using larger micro‐droplet volumes without any operational problems became possible. These facts resulted in shorter sample preparation time, higher sensitivity of the method, and lower detection limits. Under the optimized conditions, an enrichment factor of 520–587, limit of detection of 0.05–0.90 ng/mL, and linearity range of 0.2–2000 ng/mL (coefficient of determination = 0.9982–0.9995) were obtained. Relative standard deviations were < 10%. This method was successfully coupled with gas chromatography and used for the determination of benzene, toluene, ethylbenzene, and xylene isomers as harmful volatile organic compounds in water and urine samples.     

Mechanistic Investigation and Conductance Modulation of a Metal-Molecule-Metal Junction via Extra Acid Addition

One important prerequisite for the fabrication of molecular functional device strongly relies on the understanding the conducting behaviors of the metal-molecule-metal junction that can respond to an external stimulus. The model Lewis basic molecule 4,4′-(pyridine-3,5-diyl)dibenzonitrile (DBP), which can react with Lewis acid and protic acid, was synthesized. Then, the molecular conducting behavior of DBP, DBP-B(C₆F₅)₃, and DBP-TfOH (DBP-B(C₆F₅)₃, and DBP-TfOH were produced by Lewis acid and protonic acid treatment of DBP) was researched and compared. Given that their identical physical paths for DBP, DBP-B(C₆F₅)₃, and DBP-TfOH to sustain charge transport, our results indicate that modifying the molecular electronic structure, even not directly changing the conductive physical backbone, can tune the charge transporting ability by nearly one order of magnitude. Furthermore, the addition of another Lewis base triethylamine (of stronger alkaline than DBP), to Lewis acid-base pair reverts the electrical properties back to that of a single DBP junction, that is constructive to propose a useful but simple strategy for the design and construction of reversible and controllable molecular device based on pyridine derived molecule.     

宽体液腔Janus-Helmholtz换能器

本文使用有限元方法对宽体液腔Janus-Helmholtz(JH)换能器进行了仿真分析,得出了壳体宽度拓展增量对JH换能器工作性能的影响规律。使用三维建模的方式,分析了连接部分对换能器性能的影响及宽体壳体的的模态,证明了三维建模的必要性。依据仿真优化结构设计了一款宽体液腔JH换能器并进行了湖上测试。最终测试结果与仿真结果有很好的一致性,相较直筒JH换能器其谐振频率降低300Hz,发射电压响应最高可达144dB。     

基于NICE-OHMS技术进行大气压气样直接检测的理论分析

噪声免疫腔增强光外差分子光谱技术(NICE-OHMS)是目前世界上最灵敏的激光吸收光谱技术,其在低压环境中具有极高的探测灵敏度。然而当测量样品处于大气压时,NICE-OHMS系统的探测灵敏度会大幅下降。主要原因之一是大气压下获取最大NICE-OHMS信号幅度的条件与低气压下不同。通过对大气压NICE-OHMS理论进行分析,分析了影响信号幅度的参数,并通过数值模拟来寻找最佳的实验条件。本文着重讨论影响信号的主要参数包括光学腔腔长L,调制系数β,探测相位θ。其中,由于在NICE-OHMS中使用DeVoe-Brewer技术将调制频率ν_m锁定到Fabry-Parot(FP)腔的自由光谱区(FSR)。因此FP腔的腔长决定了ν_m,同时还作用于信号幅度S■。模拟结果显示,当腔长增大时,由于ν_m随之减小,载波和边带的光谱成分相互重叠部分增大,因此线型函数的幅度逐渐减小。而吸收信号幅度随着腔长的增加而逐渐增加,色散信号幅度先增大后减小,并且在腔长等于8 cm时达到最大值。调制系数β会影响频率调制后激光载波和边带的幅度大小,并且影响信号线型。随着腔长的增加,最大信号幅度对应的β值也随之增加。在相同腔长下,色散信号的最佳β值小于吸收信号,更容易使用电光调制器实现。最后分析了参数的可实现性,分析了不同种类激光器的频率调谐能力,压电陶瓷的扫描宽度等。以乙炔气体为例,大气压下NICE-OHMS的谱线半宽达到~3 GHz,而光谱覆盖范围大于10 GHz。分布反馈式半导体激光器(DFB)与外腔二极管激光器(ECDL)的频率调谐范围可以达到30 GHz以上,但是由于激光线宽宽,得到的PDH锁定性能欠佳。回音壁模式激光器(WGM)和掺饵光纤激光器(EDFL)线宽为百Hz量级,是目前高灵敏NICE-OHMS系统中常用的光源。但是WGM目前可以实现了5 GHz的激光频率调谐范围,而EDFL的外部电压可控制的调谐范围仅为3 GHz。使用精细度为55000的腔进行模拟,调制系数β=1,腔长大于8 cm时,可使用WGM激光器实现,腔长大于25 cm时,可以使用EDFL激光器实现。而对于在设计光学腔中常用的伸缩长度为25μm的PZT,随着腔长的增加,对应的腔模频移范围逐渐减小,在腔长为典型的40 cm时,扫描范围大于12 GHz。     

基于波长调制-直接吸收光谱方法的CO分子1567 nm处谱线参数高精度标定

直接吸收光谱(DAS)可直接测量分子吸收率函数,并通过拟合吸收率函数确定待测气体参数.波长调制-直接吸收光谱(WM-DAS)在DAS基础上,结合了波长调制光谱(WMS)中谐波分析思想,利用傅里叶变换复现吸收率函数,可有效提高吸收率函数的测量精度.本文利用WM-DAS方法结合长光程气体吸收池,在室温低压条件下,对CO分子1567 nm处R5-R11近红外弱吸收谱线吸收率函数进行了精确复现,其拟合残差标准差低至3×10^-5,随后根据测得的吸收率函数对谱线的碰撞展宽、Dicke收敛以及速度依赖的碰撞展宽系数等光谱参数进行了高精度标定,并将其与高灵敏度的连续波腔衰荡光谱(CW-CRDS)测量结果进行了比较,实验结果表明该方法与CW-CRDS测量结果具有高度一致性,更具有系统简单、测量速度快、对环境要求低等优点.     

Single crystal X-ray of 1-[(1,2,4-triazole-4-yl)imino]diacetyl monoxime (L) as a novel triazole and the characterization and biological studies of its chelates of Co2+, Pd2+, and Fe3+

A novel and efficient synthesis of 1-[(1,2,4-triazole-4-yl)imino]diacetyl monoxime ( L ) is described. The advantages of this method are that it is inexpensive, the starting reactants are readily available, and it has good yield and short reaction times. The hull of the product was suggested by elemental analyses, spectral and single crystal X-ray. Novel Co ²⁺ , Pd²⁺, and Fe ³⁺ chelates derived from L were characterized by Fourier transform infrared spectroscopy, suggesting that L acts as bidentate via the two azomethine groups. Tetrahedral geometry for Fe³⁺ and Co²⁺ and square-planar geometry around the Pd²⁺ chelate were suggested depending on the spectral and magnetic data. The results of density functional theory were applied to illustrate the geometry of L towards the metal ions. Coats–Redfern and Horowitz–Metzger methods were applied to investigate the kinetic and thermodynamic parameters of the chelates. Cyclic voltammetry was carried out to study the stability of the Co²⁺ and Fe³⁺ chelates. L and its complexes were tested against three types of cancer cells, antibacterial and antifungal.