薄膜荧光传感器研究进展

按薄膜荧光传感器的制备方法, 从物理薄膜、化学薄膜和自组装单层膜等三个方面综述了近年来薄膜荧光传感器的研究进展. 在此基础上, 展望了薄膜荧光传感器的研究前景.     

Optical CO(2) sensor of the combination of colorimetric change of alpha-naphtholphthalein in poly(isobutyl methacrylate) and fluorescent porphyrin in polystyrene

An optical CO₂ sensor based on the overlay of the CO₂ induced absorbance change of pH indicator dye α-naphtholphthalein in poly(isobutyl methacrylate) (polyIBM) layer with the fluorescence of tetraphenylporphyrin (TPP) in polystyrene layer is developed. The observed luminescence intensity from TPP at 655 nm increased with increasing the CO₂ concentration. The ratio I₁₀₀/I₀ value of the sensing film consisting of α-naphtholphthalein in polyIBM and TPP in polystyrene layer, where I₀ and I₁₀₀ represent the detected luminescence intensities from a layer exposed to argon and CO₂ saturated conditions, respectively, that the sensitivity of the sensor, is estimated to be 192. The response and recovery times of the sensing film are less than 6.0 s for switching from argon to CO₂, and for switching from CO₂ to argon. The signal changes are fully reversible and no hysterisis is observed during the measurements. The highly sensitive optical CO₂ sensor based on fluorescence intensity changes of TPP due to the absorption change of α-naphtholphthalein in polyIBM layer with CO₂ is achieved.     

透明导电玻璃(ITO)基材自加热传感静态芯片聚合酶链反应(PCR)

利用商品化ITO玻璃导电层的温阻效应, 无需任何微加工手段, 实现了自加热和传感的芯片温度自动程序控制, 最大程度地减小了传感滞后对温度控制稳定性的影响, 温度控制的稳定性达到了0.2 ℃, 升温速度最快可达20 ℃/s以上, 在冷却风扇辅助下降温速度最快达到了8 ℃/s. 芯片温控单元的引线从传统的两对(一对用于传感, 一对用于加热)减少为一对. 通过在该芯片上直接构建多个开放微池反应器的方法成功地实现了λDNA 157 bp片段的并行扩增. 将该芯片置于倒置荧光显微镜样品台上, 以蓝色(575 nm)发光二极管为光源, 以光电倍增管为检测手段检测了dsDNA和SYBR Green Ⅰ嵌合物的荧光强度随温度的实时变化曲线.     

A mini-review on MXenes as versatile substrate for advanced sensors

MXenes have emerged as versatile 2D materials that are already gaining paramount attention in the areas of energy,catalyst,electromagnetic shielding,and sensors.The unique surface chemistry,graphene-like mo rphology,high hydrophilicity,metal-like conductivity with redox capability identifies MXenes,as an ideal material for surface-related applications.This short review summarizes the most recent reports that discuss the potential application of MXenes and their hybrids as a transducer material for advanced sensors.Based on the nature of transducing signals,the discussion is categorized into three sections,which include electrochemical(bio) sensors,gas sensors,and finally,electro-chemiluminescence fluorescent sensors.The review provides a concise summary of all the analytical merits obtained subsequent to the use of MXenes,followed by endeavors that have been made to accentuate the future perspective of MXenes in sensor devices.     

N—（3—二茂铁乙酰胺基）丙基吡咯聚合物修饰的葡萄糖电极的研究

于铂电极上修饰一层Ｎ－（３－二茂铁乙酰胺基）丙基吡咯聚合物膜，应用循环伏安法对聚合物的电化学性能进行研究，发现了Ｎ－位取代吡咯聚合物的电活性大大降低，聚合物中 二茂铁基团氧化还原性能稳定，制成酶电极后，在＋０．２Ｖ以葡萄糖有一明显的催化峰，而对抗坏血酸，尿酸则几乎没有呼应，该葡萄糖电极性能稳定，连续工作十天，响应值基本不变。     

纳米氧化锌的乳液合成、结构表征与气敏性能

利用化学沉淀法、乳液法及微乳液法合成了不同晶粒尺寸的纳米氧化锌气敏材料；用X射线衍射和透射电镜、研究了材料的晶体结构和陶瓷微结构，并利用科西-科西法和德拜-谢乐法计算了材料的平均晶粒度和晶格畸变；和静态配气法测试了材料对乙醇、汽油、氢气、丁烷、六氟化硫的气体灵敏度。实验结果表明：微乳液法和阴离子表面活性剂乳化法合成的氧化锌具有颗粒小，气体灵敏度高和工作温度低的特点。     

基于核酸探针的光学传感方法和细胞成像研究

许多疾病的特征在于各种生物分子表现出的异常活性,这些物质通常在细胞内外显示过表达现象,因此对其灵敏靶向识别可以提供诊断和治疗效用。由于基因诊疗和化学传感技术的发展,用于灵敏检测细胞内外生物化学物质的核酸探针突显优势。核酸探针可以在稳定进入细胞的同时,特异性地结合目标物质,通过光学方法检测或通过成像技术标识出来。本文综述了采用光学传感方法和成像技术,基于核酸探针检测生物分子的新进展。根据检测对象进行分类,概括分析了几个代表性体系:核酸序列、蛋白质和酶、化学物质和物理化学条件,并详细阐述其关键设计原理、灵敏度及样品检测等结果,同时指出了各类核酸探针的优缺点。     

PVA固定化脲酶电极的制作及电极特性的研究

利用PVA低温下的物理交联固定酶,制成酶电极并在不同尿素浓度、pH值、温度等条件下进一步研究这种酶电极的响应特性.     

Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

用热聚法固定指示剂的光纤氧气传感器研究

采用热聚法将甲叉双丙烯酰胺（MBBA）聚合并共价交联在硅烷化的玻璃微珠上 ，同时将指示剂Ru（Ⅱ）-邻啡咯啉配合物物理包埋于聚合物中，研制了一种基于 荧光猝灭原理的光纤氧气传感器，采用NaHSO_3-O_2-MnSO_4体系引发MBBA水溶液热 聚合后应，通过确定NaHSO_3,MnSO_4,MBBA和Ru(phen)_3Cl_2的最佳反应浓度以及 玻璃微珠的尺寸，优化了聚合反应条件，改善了指示剂的固定效果，制备了性能较 好的传感器探头，该传感器的检测下限为5×10~(-6)(V/V)，响应时间为10s该传感 器连续工作50min,重复性标准偏差为±1%。