Monodisperse Six-Armed Starbursts based on Truxene-Cored Multibranched Oligofluorenes: Design,Synthesis, and Stabilized Lasing Characteristics

A series of monodisperse six-armed conjugated starbursts ( Tr1F , Tr2F , and Tr3F ) containing a truxene core and multibranched oligofluorene bridges capped with diphenylamine (DPA) units has been designed, synthesized, and investigated as robust gain media for organic semiconductor lasers (OSLs). The influence of electron-rich DPA end groups on their optoelectronic characteristics has been discussed at length. DPA cappers effectively raise HOMO levels of the starbursts, thus enhancing the hole injection and transport ability. Solution-processed electroluminescence devices based on the resulting six-armed starbursts exhibited efficient deep-blue electroluminescence with clear reduced turn-on voltages (3.2–3.5 V). Moreover, the resulting six-armed molecules showed stabilized electroluminescence and amplified spontaneous emission with low thresholds (27.4–63.9 nJ pulse⁻¹), high net gain coefficients (80.1–101.3 cm⁻¹), and small optical loss (2.6–4.4 cm⁻¹). Distributed feedback OSLs made from Tr3F exhibited a low lasing threshold of 0.31 kW cm⁻² (at 465 nm). The results suggest that the construction of truxene-centered six-armed conjugated starbursts with the incorporation of DPA units can effectively enhance EL properties by precisely regulating the HOMO energy levels, and further optimizing their optical gain properties.     

银纳米晶对铒镱共掺的TeO2-WO3-La2O3微晶玻璃发光性能的影响

通过熔融退火的方法以及热处理技术制备得到含有Er₂WO₆，La₂WO₆晶体的TeO₂-WO₃-La₂O₃-Er₂O₃-Yb₂O₃微晶玻璃，该玻璃具有优异的上转换发光性能。结果表明，在含银纳米晶的碲酸盐微晶玻璃中，银纳米晶和微晶的析出情况与银纳米晶的引入方式和热处理温度有关。经过390℃下15 min的热处理后，AgCl和AgNO₃共掺的碲酸盐微晶玻璃比单掺AgCl或AgNO₃的碲酸盐微晶玻璃具有更高的发光强度。银纳米晶与微晶的引入可协同提高碲酸盐玻璃的上转换发光性。     

用于液体激光介质的Nd~(3+)离子掺杂氟化镧纳米颗粒的制备与性能表征

设计并合成了掺杂不同Nd3+离子浓度的氟化镧纳米颗粒,并用油酸进行了表面修饰,使得这类纳米颗粒可分散于常见的有机溶剂中形成透明、均一、稳定的溶液。对纳米颗粒的结构、晶相以及发光性能进行了表征。固体和溶液材料在1 060 nm都有强的发射峰,说明纳米晶格可有效地保护Nd3+离子免受外界环境对发光的猝灭影响。纳米颗粒有机溶液的吸收损耗和散射损耗测试结果表明,其总损耗系数能够满足激光介质材料的损耗要求,为该材料的实用化打下了基础。     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

管式炉中半导体激光器巴条Au80Sn20焊料封装研究

为了提高半导体激光器的封装质量和效率,引入管式炉利用夹具进行批量封装。由于封装质量的好坏直接影响半导体激光器的输出特性和使用寿命,利用MOCVD生长808 nm芯片,重点分析了管式炉温度和封装时间对半导体激光器巴条双面金锡封装质量的影响。利用X射线检测、结电压、光电特性参数和smile效应测试手段,确定了管式炉封装半导体激光器巴条的最优封装条件,为以后的产业化提供了指导意义。     

Ru掺杂SnO2半导体固溶体的电子结构研究

运用基于密度泛函理论的第一性原理方法,建立了SnO₂以及不同比例Ru掺杂的SnO₂超胞模型,在对其进行几何优化后计算了Sn_1-xRu_xO₂(x=0,1/16,1/12,1/8,1/6,1/4,1/2)半导体的电子结构,并讨论了其晶格参数、电荷密度、能带结构和态密度(包括分态密度)等性质。结果表明,掺杂后,晶格参数随掺杂量的增加线性减小,与实验值的偏差在4%以内;掺杂后,在费米能级处可以提供更多的填充电子,使得电子跃迁至导带更容易,固溶体的导电性增强。为Sn_1-xRu_xO₂固溶体电极材料的发展和应用提供了理论基础。     

高质量NaNdF4六方棱柱纳米棒的水热形貌控制合成及发光性质

采用水热法在温和的条件下合成了具有规则外形的六方棱柱状NaNdF₄纳米棒。X射线衍射（XRD）分析表明：产物为纯六方相NaNdF₄,场发射扫描电镜（SEM）分析表明产物形貌为棱柱状纳米棒,长约为550nm,棒的端部呈规则六边形,边长约为85nm。高分辨透射电子显微镜（HRTEM）和选区电子衍射（SD）显示所得样品为良好的单晶。NaNdF₄晶体的生长动力学过程表明：螯合剂（EDTA-Na₂）与稀土金属离子间的螯合作用受pH值影响,导致成核速度变化,进而影响NaNdF₄纳米晶的最终尺寸和形貌。室温下的NaNdF₄纳米棒的发光峰位于红外光范围（λ=892,1058,和1342nm）,其最强发射峰位于1058nm,对应于Nd³⁺的⁴F_3/2→⁴I_11/2f-f跃迁。     

高表面能晶面裸露的金属氧化物微纳米晶体的可控合成

表面结构是影响固体材料物理和化学性质的重要因素,由于高表面能的晶面上存在更多的表面悬挂键等,高表面能晶面裸露的微纳米晶体一般表现出很好的物理和化学活性．近年来,科研工作者针对高能面微纳米晶体材料的制备及性能调控进行了大量的研究工作并取得了一定的进展．本文重点讨论了高能面裸露的金属氧化物半导体微纳米晶体的合成制备方法．主要以本课题组近年在该领域的研究为例,分别从晶体生长过程中的静电作用法、“帽”式试剂保护法、过饱和度调控法、动力学调控法及选择性化学刻蚀法等几个方面对高表面能晶面裸露的金属氧化物微纳米晶体的制备进行了系统的总结．     

CdS/石墨烯纳米复合物的可见光催化效率和抗光腐蚀行为

制备了一系列CdS纳米晶/石墨烯(CdS/GR)复合物,并在可见光照条件下评价了其光催化降解亚甲基蓝的光催化效率和抗光腐蚀行为. 研究表明,石墨烯的引入加速了CdS纳米晶(NCs)光生电子的迁移速率,抑制了其光生电子-空穴的复合,有效改善了其光催化降解有机污染物的性能. CdS/GR复合物中的石墨烯含量显著影响其光催化效率,其中石墨烯含量为4.6%的光催化剂效率最高,其光电流是CdS NCs的2.3倍. 利用光电化学和X射线衍射技术进一步证实,石墨烯的引入抑制了CdS NCs光腐蚀的发生,提高了CdS/GR复合物的光催化稳定性.     

Ionic hexagonal columnar metallomesogens derived from tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine

A series of transition metal (Ni, Cu, Pd) complexes derived from macrocyclic tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine (TAAB) was synthesized and their mesomorphic properties studied by differential scanning calorimetry, polarized optical microscopy and X-ray powder diffraction (XRD). These compounds have eight alkoxy side chains attached around the central molecular core and form disc-like molecules. All the derivatives exhibited columnar mesophases over a wide range of temperature. The mesomorphic behaviour was found to be dependent on the incorporated metal and the carbon length of the alkoxy side chains. The clearing temperatures decreased in the order M = Ni > Pd > Cu; this decrease was probably due to the size of the metal ions. Some derivatives with shorter side chains (n = 10, 12) were room temperature liquid crystals. All compounds were found to exhibit hexagonal columnar (Col_h) phases which were confirmed by powder XRD.