水相CdTe纳米晶的合成、生长机理和应用研究

纳米晶在生物检测、光电器件、光波导、可调激光器等领域有着广泛的应用前景．本文以CdTe为例,对近年来水相纳米品合成和生长机理方面的研究进展作了简要的归纳和论述．水相合成纳米晶具有操作简单、价格低廉、在水溶液中稳定性高等优点,并可以通过静电力、范德华力等弱相互作用实现一维、二维甚至三维结构的组装．对纳米晶的生长机理的研究涵盖了热力学主导的Ostwald熟化（Ostwaldripening）机理和动力学控制的聚集机理两个主要方面．文章最后对水相合成CdTe纳米晶的应用进行了总结和展望,     

Influence of hexadecane on the formation of droplets and growth of particles for methyl methacrylate miniemulsion polymerization

The evolution of monomer droplets and latex particles of methyl methacrylate miniemulsions, initiated by an oil‐phase initiator, stabilized by a cationic surfactant mixture, and costabilized by different amounts of hexadecane, was investigated. With an increasing hexadecane concentration, the ultrasonication time required for the miniemulsions to reach a critically stabilized state was reduced, and a unimodal size distribution of the droplets with a decreasing average diameter was obtained. For lower hexadecane concentrations, a bimodal size distribution of the latex particles, with a significant increase in the volume fraction of the smaller latex particles, was achieved after the polymerization. The enhanced growth of the volume fraction of the smaller latex particles came from both nucleation of the shrinking droplets due to Ostwald ripening and homogeneous and/or micellar nucleation, if micelles existed, triggered by radicals in the aqueous phase. For high hexadecane concentrations, Ostwald ripening was effectively retarded, and the miniemulsions were sufficiently stabilized against the degradation of molecular diffusion. The size distributions of the droplets and latex particles were almost identical. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4603–4610, 2006     

Controllable Preparation of Hierarchical ZnO Nanocages and its Oxygen Vacancy through the Nanoscale Kirkendall Process

The synthesis of ZnO with tailorable shapes and point defects is important for its potential applications. Here, a facile approach is demonstrated to prepare ZnO nanocages with controllable porous shell structures though sintering a Zn‐based cyanide‐bridged coordination polymer under different temperatures. The transformation of ZnCP microspheres into ZnO nanocages is based on two types of nanoscale Kirkendall effect, which are related to low temperature solid–solid interfacial oxidation and high temperature solid–gas interfacial reaction, respectively. At low temperature (around 300 °C) and before the ZnCP decomposition, the novel “hierarchical ZnO bigger nanocages embedded with smaller nanocages with 10 nm nanocrystals” can be generated. By contrast, when coming to the total decomposition of ZnCP at 800 °C, ZnO nanocages with significantly increased sizes and large cavities are generated, and large amounts of oxygen vacancies (V_O) are created at the same time, leading to the dramatic increased luminescence intensities of the UV peak due to V_O at 540 nm. Thus, the luminescence intensities versus defect concentration in the prepared ZnO nanocages can also be controlled by tuning the sintering temperatures.     

Physicochemical control of foam properties

This article summarizes our recent understanding on how various essential foam properties could be controlled (viz. modified in a desired way) using appropriate surfactants, polymers, particles and their mixtures as foaming agents. In particular, we consider the effects of these agents on the foaminess of solutions and suspensions (foam volume and bubble size after foaming); foam stability to liquid drainage, bubble coalescence and bubble Ostwald ripening; foam rheological properties and bubble size in sheared foams. We discuss multiple, often non-trivial links between these foam properties and, on this basis, we summarize the mechanisms that allow one to use appropriate foaming agents for controlling these properties. The specific roles of the surface adsorption layers and of the bulk properties of the foaming solutions are clearly separated. Multiple examples are given, and some open questions are discussed. Where appropriate, similarities with the emulsions are noticed.     

The Equations of Ostwald Ripening for Dilute Systems

We consider a dilute mixture in 3D of a finite number of particles initially close to spherical, but of varying sizes, and representing one of the phases evolving according to the quasistatic dynamics. Under the scaling hypotheses that (1) typical size/typical distance and (2) deviation from sphericity/typical size are small, we associate centers and radii to each particle for the whole evolution and derive rigorously a set of ODEs fo the radii which we relate to the Lifschitz–Slyosov–Wagner theory of coarsening.     

High pressure applications in milk treatment for cheese-making and accelerated ripening

Abstract

Several studies have been carried out in order to evaluate the effect of high hydrostatic pressure on food components, its impact on microorganisms and enzymes, and the modifications it produces at the nutritional and sensory level. However, practical applications of high pressure treatment have received little attention. This paper examines our recent ongoing work toward the development of high pressure applications, such as the production of raw milk cheeses from high pressure-treated milk and the possibility of cheese ripening acceleration.     

Effects of high pressure treatment on fermentation processes during ripening of Gouda cheese

Abstract

High pressures ranging 50 to 400 MPa were applied to Gouda cheese cylinders and evolution of the volatile fraction was followed during three weeks. No new volatiles were recovered after simultaneous distillation-extraction, but some effects of high pressure on the fermentation processes were observed. Thus butyric acid and acetoin were found in lower concentrations after ripening of pressurized samples. Nevertheless differences in the volatile profile were not large enough to suggest an effect of high pressure on the acceleration of Gouda cheese ripening.     

Photoracemization-Based Viedma Ripening of a BINOL Derivative

Viedma ripening is a deracemization process that has been used to deracemize a range of chiral molecules. The method has two major requirements: the compound needs to crystallize as a conglomerate and it needs to be racemizable under the crystallization conditions. Although conglomerate formation can be induced in different ways, the number of racemization methods is still rather limited. To extend the scope of Viedma ripening, in the present research we applied UV-light-induced racemization in a Viedma ripening process, and report the successful deracemization of a BINOL derivative crystallizing as a conglomerate. Irradiation by UV light activates the target compound in combination with an organic base, required to promote the excited-state proton transfer (ESPT), leading thereafter to racemization. This offers a new tool towards the development of Viedma ripening processes, by using a cheap and “green” catalytic source like UV light to racemize suitable chiral compounds.     

Uniform Mesoporous Anatase Hollow Spheres: An Unexpectedly Efficient Fabrication Process and Enhanced Performance in Photocatalytic Hydrogen Evolution

Uniform mesoporous anatase hollow spheres with high crystallinity have been fabricated by an efficient method, in which biocompatible ethanedioic acid acts as the chelating agent during the Ostwald ripening process. The combination of high crystallinity, large surface area, and mesoporosity leads to an excellent photocatalytic activity. In solar water splitting, the hollow spheres exhibit remarkably enhanced photocatalytic performance that is 1.4 times of P25.     

银薄层控制金纳米四足体的重塑和等离激元调谐

探究了溶液中不同温度以及不同溶液成分（I^-的引入）对金纳米四足体（GNTPs）重塑过程的影响,表明了GNTPs的重塑机制为Ostwald熟化,即弱结合的表面Au原子在高凸曲率区域溶解和在凹区域重新沉积。这种重塑过程可以随时通过镀银薄层在几秒内阻止,GNTPs的形貌可以在最大程度上得到很好的稳定,从而也可以防止其光学性质的演变。在此基础上,通过紫外可见近红外（UV-Vis-NIR）吸收光谱和基于同步辐射的小角X射线散射（SAXS）进一步研究了GNTPs/Ag的稳定性,并通过表面增强拉曼散射（SERS）光谱证实了GNTPs/Ag的光学响应。