用于液体激光介质的Nd~(3+)离子掺杂氟化镧纳米颗粒的制备与性能表征

设计并合成了掺杂不同Nd3+离子浓度的氟化镧纳米颗粒,并用油酸进行了表面修饰,使得这类纳米颗粒可分散于常见的有机溶剂中形成透明、均一、稳定的溶液。对纳米颗粒的结构、晶相以及发光性能进行了表征。固体和溶液材料在1 060 nm都有强的发射峰,说明纳米晶格可有效地保护Nd3+离子免受外界环境对发光的猝灭影响。纳米颗粒有机溶液的吸收损耗和散射损耗测试结果表明,其总损耗系数能够满足激光介质材料的损耗要求,为该材料的实用化打下了基础。     

Rare-earth metal derivatives supported by aminophenoxy ligand: Synthesis,characterization and catalytic performance in lactide polymerization

A library of rare-earth metal derivatives supported by an aminophenoxy ligand was prepared and their catalytic performance in lactide polymerization was investigated. It was found that the synthetic strategy had a profound effect on the formation of aminophenoxy rare-earth metal complexes. Amine elimination between Ln[N(SiMe₃)₂]₃(μ-Cl)Li(THF)₃ (Ln = Yb, Y) and 1 equiv. of the aminophenol [HONH] ([HONH] = ο-OCH₃-C₆H₄NHCH₂(3,5-^tBu₂-C₆H₂-2-OH)) in toluene gave the unexpected heterobimetallic bis(aminophenoxy) rare-earth metal complexes [ON]₂LnLi(THF)₂ (Ln = Yb ( 1 ), Y ( 2 )). When the reactions were carried out in THF and TMEDA, amine elimination produced the aminophenoxy rare-earth metal amide complexes {[ON]LnN(SiMe₃)₂}₂ (Ln = Yb ( 5 ), Y ( 6 )) in ca 85% isolated yields. Complexes 5 and 6 could also be obtained from salt metathesis reaction of {[ON]LnCl(THF)}₂ (Ln = Yb ( 3 ), Y ( 4 )) with NaN(SiMe₃)₂ in a 1:2 molar ratio. In addition, treatment of complexes 3 and 4 with NaOAr (Ar = &bond;C₆H₄-4-^tBu) and (SiMe₃)₂NC(NPrⁱ)₂Na in 1:4 and 1:2 molar ratios provided the corresponding aminophenoxy rare-earth metal derivatives {[ON](μ-OAr)Ln(μ-OAr)Na(THF)₂}₂ (Ln = Yb ( 7 ), Y ( 8 )) and {[ON]Ln[(ⁱPrN)₂CN(SiMe₃)₂]}₂ (Ln = Yb ( 9 ), Y ( 10 )), respectively. These complexes were fully characterized, and their molecular structures were determined using single-crystal X-ray diffraction. Polymerization experiments showed that complexes 1 , 2 , 5 , 6 , 9 and 10 were highly active for the ring-opening polymerization of l -lactide in toluene, and complex 1 promoted l -lactide polymerization in a controlled fashion. The polymerization of rac-lactide initiated by the neutral aminophenoxy rare-earth metal complexes 5 , 6 , 9 and 10 in THF afforded heterotactic polymers.     

Co‐syndiospecific Alternating Copolymerization of Functionalized Propylenes and Styrene by Rare‐Earth Catalysts

The precise control of monomer sequence and stereochemistry in copolymerization is of much interest and importance for the synthesis of functional polymers, but studies toward this goal have met with only limited success to date. Now, the co‐syndiospecific alternating copolymerization of methoxyphenyl‐ and N,N‐dimethylaminophenyl‐functionalized propylenes with styrene by half‐sandwich rare‐earth catalysts is reported. This reaction efficiently afforded the corresponding functionalized propylene‐alt‐styrene copolymers with a perfect alternating sequence and excellent co‐syndiotacticity (rrrr >99 %), thus constituting the first example of co‐stereospecific alternating copolymerization of polar and non‐polar olefins.     

水热法制备Pr掺杂Bi2WO6三维花状微球的光催化性能

通过水热法制备稀土Pr掺杂Bi₂WO₆三维花状微球,利用XRD、SEM、N₂吸附-脱附、紫外-可见吸收光谱和光致发光光谱对所制备的光催化材料进行表征。通过降解亚甲基蓝评价样品的光催化活性。结果表明,1.0% Pr-Bi₂WO₆样品的可见光催化活性最佳,降解率达到95%。Pr掺杂提高了催化剂的可见光吸收性能并且能够束缚光生电子使得电子空穴对有效分离从而获得强氧化物质。对其光催化降解做出了合理的解释。     

基于[LnMo12]二十面体的三维稀土钼酸盐骨架的合成、结构及荧光性能

通过缓慢蒸发溶剂法合成了2例新的三维稀土钼酸盐：[Ln (H₂O)₃]₃[LnMo₁₂O₄₂]·xH₂O,其中Ln=Eu (1)、Tb (2),x=7(1),10.17(2)。这2种稀土钼酸盐中都含有新颖的二十面体[LnMo₁₂O₄₂]构建单元,该单元通过与{LnO₉}多面体进一步连接形成三维网络。光致发光测试表明,化合物1和2显示出明显不同的发射特征,这与Eu³⁺和Tb³⁺离子的不同能级跃迁密切相关。化合物1表现出较强的红色发射(CIE色度坐标为(0.66,0.33))、高发光强度、较大的荧光量子产率(约60%),对应于从⁵D0到⁷F_J (J=4、3、2、1、0)的跃迁;化合物2表现出浅绿色发射(CIE色度坐标为(0.34,0.60)),对应从⁵D₄到⁷F_J (J=6、5、4、3)的能级跃迁,其发光强度较弱和荧光量子产率较低(约20%)。有趣的是,一定量的Tb³⁺引入和大量溶剂分子的存在导致化合物2发生部分荧光猝灭,但对化合物1的荧光几乎没有影响。     

近红外量子剪裁研究进展

目前,发光材料在信息、显示、照明、国防等领域得到了极其广泛的应用．随着人们对发光和发光材料基本科学问题的认识及其广阔而不可替代的应用前景的驱动,发光和发光材料领域在过去100年间迅速发展．量子效率大于1的发光及光功能材料有望在高效发光、等离子体平板显示、高效光纤激光器、高效太阳能光电池等领域得到广泛应用．深入研究光子材料的激发与发光、能量传递与转换、敏化发光与光放大等物理和光学基本科学问题,不但有益于揭示光子材料的一些新现象、新规律,而且将为光子材料与器件的设计与研制奠定理论和方法基础．本文概述了近红外量子剪裁的发展及其材料和相关机理的最近研究进展,主要包括稀土离子单掺体系双光子和三光子级联发射近红外量子剪裁、稀土离子对共掺体系近红外量子剪裁下转换．此外,本文还讨论了量子剪裁及其材料体系的应用、面临的挑战和未来的发展方向．     

Eu（TTA）3AA-NBR/PVP同轴超细纤维的制备及荧光性能研究

用同轴静电纺丝制备了含有稀土铕配合物(Eu(TTA)3AA)的芯-壳结构的丁腈橡胶/聚乙烯吡咯烷酮(NBR/PVP)超细荧光纤维。考察了在外层PVP纺丝参数不变的情况下,改变芯层丁腈橡胶纺丝液的纺丝速度、Eu(TTA)3AA含量等对纤维形貌的影响。通过研究Eu(TTA)3AA-NBR/PVP同轴超细纤维中Eu(TTA)3AA微观结构、含量与纤维的荧光性能之间的关系,发现在同轴纤维形成过程中由于溶剂的快速挥发可使Eu(TTA)3AA形成无定形结构,进而在纤维中形成分子簇级别的分散,在Eu(TTA)3AA含量为30%时,同轴纤维比Eu(TTA)3AA粉末的荧光强度提高了2倍。     

Inverse Hall–Petch like behaviour in a mechanically milled nanocrystalline Al5Fe2 intermetallic phase

In the present investigation, the indentation study on the high-energy ball-milled nanocrystalline Al₅Fe₂ intermetallic compound has established the inverse Hall–Petch (IHP) behaviour. The structural characterisation of the milled powder particles by X-ray diffraction (XRD) and transmission electron microscopy has shown the evolution of nanocrystalline phase. Micro-indentation measurements have revealed the increase in hardness with decreasing grain size, reaching to a maximum of 9.0 ± 0.3 GPa up to a grain size of 32 ± 4 nm, followed by a decrease. The decrease in hardness with further refinement, an indication of grain size softening, demonstrates the IHP-like behaviour. The deviation from the Hall–Petch behaviour has been discussed using various models based on the dislocations and grain boundary-mediated processes. From the analysis, it appears that the model based on mesocopic grain boundary sliding phenomena is more appropriate to account for the observed grain size softening.     

稀土金属催化的碳氢官能团化反应

过渡金属催化的碳氢官能团化反应具有原子经济性高、区域选择性好和合成路线简短等优点,近年来得到了化学家们的广泛关注,是当前有机合成化学的热门研究领域之一。近几年来,稀土金属催化剂也逐渐被开发应用于该领域,得到优异的结果,同时也表现出一些独特的催化活性。本文综述了稀土金属络合物催化的碳氢官能团化反应,主要包括C-H烷基化反应以及C-Hβ-胺烷基化反应,这些反应为C-C键的构筑提供了新方法。同时本文也针对该领域目前存在的挑战,对未来的研究工作做了展望。     

High pressure studies using two-stage diamond micro-anvils grown by chemical vapor deposition

Ultra-high static pressures have been achieved in the laboratory using a two-stage micro-ball nanodiamond anvils as well as a two-stage micro-paired diamond anvils machined using a focused ion-beam system. The two-stage diamond anvils’ designs implemented thus far suffer from a limitation of one diamond anvil sliding past another anvil at extreme conditions. We describe a new method of fabricating two-stage diamond micro-anvils using a tungsten mask on a standard diamond anvil followed by microwave plasma chemical vapor deposition (CVD) homoepitaxial diamond growth. A prototype two-stage diamond anvil with 300?µm culet and with a CVD diamond second stage of 50?µm in diameter was fabricated. We have carried out preliminary high pressure X-ray diffraction studies on a sample of rare-earth metal lutetium sample with a copper pressure standard to 86?GPa. The micro-anvil grown by CVD remained intact during indentation of gasket as well as on decompression from the highest pressure of 86?GPa.