低反轰多腔热阴极微波电子枪物理设计

 为了开展基于自由电子激光的紧凑型太赫兹源技术研究,获得高品质（强流、低能散、低发射度）电子束,提出了一个低反轰双路微波馈入多腔热阴极微波电子枪的设计方案。用两路独立微波馈入激励微波电子枪,一路由首腔馈入激励首腔和实现阴极表面建场引出电子,另一路由后续腔馈入并通过腔间耦合激励各腔。两路微波互不耦合,通过移相器实现首腔和第2腔之间的相移连续可调。理论模拟结果表明:在一个射频周期内,热阴极微波电子枪的电子反轰功率约8 kW,平均反轰功率仅为1.2 W（重复频率25 Hz和脉宽6 μs）。     

220 GHz回旋管脉冲磁场系统和电子枪的设计与实验研究

 根据220 GHz回旋管的工作要求,设计了其所需的脉冲磁场系统与电子枪。脉冲磁场系统采用哑铃状结构,具有均匀区长、电阻小与电感小等优点,可以在较低电容与电压下获得更高的脉冲峰值磁场,并分析了其脉冲放电特性。电子枪采用双阳极磁控注入枪,用EGUN对其进行了设计优化,电子注纵横速度比为1.53,速度零散为3.1%。实验研究表明,脉冲磁场峰值强度达到8 T,电子注电流达到2 A,电子电流基本传输到靶片,控制极与阳极没有截获到电子,脉冲磁场系统与电子枪工作正常,达到设计要求。     

On the theory of photocathode rf guns

In this paper we give a set of analytical formulae to describe the characteristics of photocathode rf guns at any rf frequencies, such as energy, energy spread, bunch length, out going current, and emittance etc. as functions of the laser injection phase, which are useful in the design and practical operation of rf guns.     

Ultra-low emittance X-band photocathode RF gun

In this paper, we present the simulation results of a 1.6 cell X-band photocathode RF gun for ultra-low emittance electron beams. It will work at 9.3 GHz. The emittance, bunch length, electron energy and energy spread at the gun exit are optimized at bunch charge of 1pC using PARMELA. Electron bunches with emittance about 0.1 mm·mrad and bunch length less than 100 fs can be obtained from this gun. A PITZ type coupler is adopted in this gun and an initial simulation by MAFIA is also given in this paper.     

二级轻气炮发射过程中前冲气体的初步研究

 在二级轻气炮发射过程中,靶室内的残存气体和绕行到弹丸前方的推进气体都有可能对实验结果造成影响。利用石英传感器测量并得到了二级轻气炮高速弹丸发射时前冲气体的压力信号,并计算得到了相应的压力。实验结果表明：二级轻气炮发射时确实存在前冲气体现象,但其压力幅值较小,约为10^-2 GPa量级,不会对高压物理实验的结果造成明显的影响。     

100-femtosecond MeV electron source for ultrafast electron diffraction

A near-relativistic 100-fs MeV electron beam is developed by using a photocathode rf gun for revealing the hidden ultrafast dynamics of intricate molecular and atomic processes in materials through experimentation of ultrafast time-resolved electron diffraction (UED). The transverse and longitudinal dynamics of femtosecond electron beam in the rf gun were studied theoretically by particle simulation. The growths of the emittance, bunch length and energy spread due to the rf and space charge effects were investigated by changing the laser parameters, field gradient and electron charge. The theoretical studies indicate that a 100-fs MeV electron beam with the transverse emittance of 0.1 mm mrad and the relative energy spread of 10⁻³–10⁻⁴ at bunch charge of 0.1–2 pC (10⁶–10⁷ electrons per pulse) is achievable for UED, in which the intensity is three orders of magnitude higher than that produced by the conventional dc or pulsed guns.     

A Control Simulation Method of High-Speed Trains on Railway Network with Irregular Influence

Based on the discrete time method, an effective movement control model is designed for a group of high-speed trains on a rail network. The purpose of the model is to investigate the specific traffic characteristics of high-speed trains under the interruption of stochastic irregular events. In the model, the high-speed rail traffic system is supposed to be equipped with the moving-block signalling system to guarantee maximum traversing capacity of the railway. To keep the safety of trains' movements, some operational strategies are proposed to control the movements of trains in the model, including traction operation, braking operation, and entering-station operation. The numerical simulations show that the designed model can well describe the
movements of high-speed trains on the rail network. The research results can provide the useful information not only for investigating the propagation features of relevant delays under the irregular disturbance but also for rerouting and rescheduling trains on the rail network.     

冰弹丸高速发射方法研究

冰弹丸的高速发射技术是认识冰弹丸高速撞击靶板损伤效应的瓶颈技术。利用二级轻气炮作为发射装置,采用液氮杜瓦制冷系统实现温度控制,选择铝质膜片对气压进行控制,利用高速摄像机对冰弹丸的完整性进行观测,并利用丝网测速仪对弹丸速度进行测量,实现了对冰弹丸的高速发射。通过实验验证了该方法的可行性,得到了完整冰弹丸在1516m/s下撞击铝合金靶板的实验结果。     

感应耦合等离子体中和枪的电子引出特性研究

给出了一种感应耦合等离子体源的设计,用于等离子体中和枪装置。通过实验方法研究等离子体源的电子引出特性,并结合理论分析了等离子体密度随射频功率的变化关系。研究结果表明等离子体源的电子引出特性与放电腔内气压有关联性,E?H模式转换中电子密度的变化与负载的电感值相关。研究成果对等离子体中和枪的发展有重要的参考价值。     

第三介质作用下坡道对轮轨黏着特性影响

利用JD-1轮轨模拟试验机,通过设计坡道试验夹具实现了不同坡道接触条件的轮轨模拟试验,研究了第三介质条件下坡度对轮轨界面黏着特性的影响规律.结果表明:在干态、水介质和防冻液介质条件下,上下坡道工况的轮轨黏着系数均低于平直轨道工况;随坡道坡度的增加,黏着系数呈下降趋势且下坡道的黏着系数下降更为明显;与水介质相比较,轮轨界面存在防冻液时更容易引起低黏着现象;上坡道工况下,随速度和轴重的增加轮轨界面黏着系数呈略微下降的趋势.