Synthesis,Antimicrobial Activity and Semi-conducting Properties of Novel 2-(4-Chloro-1-Naphtyloxy)-2-Oxoethyl Methacrylate with 2-(Diethylamino)Ethyl Methacrylate Copolymers

The free-radical initiated copolymerization of 2-(4-chloro-1-naphtyloxy)-2-oxoethyl methacrylate (ClNOEMA) with 2-(diethylamino) ethyl methacrylate (DEAEMA) was carried out in 1,4-dioxane solution at 70 ± 1°C using 2,2′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios (ranging from 0.15 to 0.85) in the feed. The copolymer composition obtained by elemental analysis led to the determination of reactivity ratios employing Fineman-Ross (F-R) and Kelen-Tüdös (KT) linearization methods. These parameters were also estimated using a non-linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The prepared homo and copolymers were tested for their antimicrobial activity against bacteria and yeast. These copolymers have been converted into novel salts by reaction with the iodemethane (CH₃I). The copolymers and the corresponding salts have been characterized fully by a range of spectroscopic analysis techniques. The electrical conductivity dependence of temperature of the polymers were measured and the polymers exhibit the semi-conducting behavior, confirming that the electrical conductivity increases with increasing temperature. The poly(CINOEMA-co-DEAEMA) polymer doped by CH₃I for 15 min shows the highest conductivity. The optical band gap, activation energy and room temperature conductivity values of these polymers were obtained. These electronic parameters suggest that the poly(CINOEMA-co-DEAEMA)s doped by CH₃I for 15 min is an organic semiconductor with the thermally activated conduction mechanism.     

Kinetic Study of Radical Polymerization v. Determination of Reactivity Ratio in Copolymerization of Acrylonitrile and Itaconic Acid by 1H‐NMR

Many reports exist in the literature about the application of ¹H and ¹³C‐NMR techniques to analyze the copolymer structure and composition and also determination of reactivity ratios. In this work, on‐line ¹H‐NMR spectroscopy has been applied to identify reactivity ratios of itaconic acid and acrylonitrile in the solution phase (DMSO as the solvent) and in the presence of AIBN as the radical initiator. All the peaks corresponding to the existing protons were assigned quietly. Therefore, the kinetics of the copolymerization reaction was investigated by studying the variation of integral of two characteristic peaks regarding each monomer. The obtained data were used to find the reactivity ratios of acrylonitrile and itaconic acid by linear least‐squares methods such as Finemann‐Ross, inverted Finemann‐Ross, Mayo‐Lewis, Kelen‐Tudos, extended Kelen‐Tudos and Mao‐Huglin. In addition, a non‐linear least‐square method (Tidwell‐ Mortimer) was used at low conversions. Extended Kelen‐ Tudos and Mao‐Huglin were applied to determine reactivity ratio values at high conversions as well.     

N‐Vinylpyrrolidone and Ethoxyethyl Methacrylate Copolymer: Synthesis,Characterization and Reactivity Ratios

Free radical copolymerization of N‐vinyl‐2‐pyrrolidone with 2‐ethoxyethyl methacrylates was carried out with 2,2′‐azobisisobutyronotrile as an initiator in 1,4‐dioxane. The resulting copolymer was characterized by FTIR, H¹‐NMR and C¹³‐NMR spectroscopic techniques thermal properties of copolymer were determined by DSC and TGA. The reactivity ratios of the monomers were computed by the Fineman‐Rose (F‐R), Kelen‐Tudos (K‐T) and extended Kelen‐Tudos (EK‐T) method at lower conversion, using the data obtained from both FTIR and elemental analysis studies; the results are in good agreement with each other. The average reactivity ratio, Alfrey‐Price Q and e values were found to be r ₁=0.769, r ₂=0.266 and Q ₁=0.0859, e ₁=0.4508, respectively for NVP/EOEMA copolymer. The distribution of monomer sequence along the copolymer chain was calculated using a statistical method based on obtained reactivity ratio. The number average molecular weight and polydispersity were determined by GPC.     

Synthesis of Fluorinated Polyurethane/Polyacrylate Hybrid Emulsion Initiated by 60Co γ-Ray and Properties of the Latex Film

Based on the solvent-free method, novel fluorinated polyurethane/polyacrylate hybrid emulsions, dodecafluoroheptyl methacrylate (DFMA) as fluorinated monomer, were successfully prepared via emulsion polymerization without traditional emulsifier. For the purpose of increasing the grafting ratio of polyurethane and polyacrylate, ⁶⁰Co γ-ray radiation polymerization had been adopted to enhance the hardness of latex film. The chain structure and polymerization progress were confirmed by the analysis of Fourier transform infrared spectroscopy. The grafting ratio of polymethyl methacrylate and polyurethane was obtained by calculating the ratio of N–H peak integral area and Ph(C=C) peak integral area. The effect of DFMA content on thermal stability, mechanical property and water resistance were investigated systematically by thermal weight loss analysis, tensile strength test, absorbed water ratio and water contact angle.     

A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

Quadrupole mass filter operation under the influence of magnetic field

This work demonstrates resolution enhancement of a quadrupole mass filter (QMF) under the influence of a static magnetic field. Generally, QMF resolution can be improved by increasing the number of rf cycles an ion experiences when passing through the mass filter. In order to improve the resolution, the dimensions of the QMF or the operating parameters need to be changed. However, geometric modifications to improve performance increase the manufacturing cost and usually the size of the instrument. By applying a magnetic field, a low‐cost, small footprint instrument with reduced power requirements can be realized. Significant improvement in QMF resolution was observed experimentally for certain magnetic field conditions, and these have been explained in terms of our theoretical model developed at the University of Liverpool. This model is capable of accurate simulation of spectra allowing the user to specify different values of mass spectrometer dimensions and applied input signals. The model predicts enhanced instrument resolution R>26 000 for a CO₂ and N₂ mixture with a 200‐mm long mass filter operating in stability zone 3 via application of an axial magnetic field. Copyright © 2013 John Wiley & Sons, Ltd.     

微波水热法制备CdS单分散纳米球及其形貌控制

采用微波水热法,以醋酸镉(Cd(CH3COO)2.2H2O)为镉源,硫脲(CS(NH2)2)为硫源,制备出了具有单分散球形形貌的CdS纳米晶。应用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、能量色散谱仪(EDS)、高分辨透射电子显微镜(HR-TEM)、紫外可见吸收光谱(UV-Vis)等测试手段对样品的物相、形貌、元素组分及吸光性能进行了表征,并以罗丹明B溶液的降解脱色反应来考察了其的光催化活性。结果表明:随着S/Cd物质的量比(nS/nCd)逐渐增大,产物会出现由刺球链状向分散球形过渡的规律性变化。在一定的nS/nCd比的条件下可以合成出大小均匀、分散性较好的六方相CdS纳米球。样品对可见光有较强吸收,存在着一定的红移现象。在可见光照射下,硫化镉单分散纳米球具有更高的光催化活性。     

声化学辅助溶剂热合成高光催化性能的BiOCl光催化剂

以五水硝酸铋和氯化钠为原料,乙二醇(EG)和水作溶剂,通过声化学辅助溶剂热法合成了系列BiOCl纳米晶光催化剂。应用氮气物理吸附、X射线粉末衍射(XRD)、扫描电镜(SEM)、傅里叶变换红外光谱(FTIR)、紫外-可见(UV-Vis)漫反射(DRS)和光电流等测试手段对所制备的光催化剂进行了表征。在汞灯和氙灯照射下,以苯酚和甲基橙为水体模型污染物,系统考察了超声辐射时间和醇水比(V_EG/V_H2O)对BiOCl光催化剂性能的影响。结果表明,当超声辐射时间为60 min,V_EG/V_H2O=1/4时,合成的BiOCl表现出最佳的光催化活性,为常规沉淀法制备的BiOCl的3.3倍。活性提高的主要原因是,适当时间的超声波辐射和醇水比有利于催化剂比表面积的提高,同时可以丰富催化剂表面羟基(-OH)的数量和提高光生电子和空穴的分离效率。     

应用多接收器电感耦合等离子体质谱法测定海洋碳酸盐中稳定铅同位素组成

研究了多接收器电感耦合等离子体质谱仪(MC-ICP MS)测定铅同位素比值时,影响测试结果准确度和精密度的主要因素及其优化过程。在优化条件下,10 h内连续30次测定4 ng/mL NIST SRM 981同位素标准溶液铅同位素比值,获得208Pb/206Pb、207Pb/206Pb和206Pb/204Pb相对标准偏差(RSDs)分别为0.005%、0.004%和0.054%。长期监测208Pb/206Pb、207Pb/206Pb和206Pb/204Pb,标准偏差(2SDs)分别为0.000 06、0.000 05和0.006 7。采用NEPTUNE MC-ICP MS法测定了低铅海洋碳酸盐样品中稳定铅的同位素比值,并对南海橙黄滨珊瑚(Porites lutea)和库氏砗磲(Tridacna gigas)进行了分析,得到全流程空白为8～10 pg,重复样误差优于0.1%。经0.50 mol/L HNO3洗脱之后,得到海南珊瑚样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.086 2±0.001 5、0.849 90±0.001 47(n=16);海南砗磲样品中208Pb/206Pb、207Pb/206Pb的比值分别为2.116 9±0.004 2、0.864 81±0.001 62(n=9)。进一步考察了南海海洋碳酸盐中204Pb的同位素比值。分析结果表明,南海海洋碳酸盐中稳定铅同位素比值与中国气溶胶、珠江三角洲大气沉降、黄土及南海海底玄武岩等具有很好的相关性。方法适用于复杂基体高钙低铅的海洋碳酸盐样品中铅同位素比值的分析。     

Synthesis and performance characterization of PS-PPEES nanoporous membranes with nonwoven porous support

The present work describes about the synthesis and characterization of Polysulfone blend nanoporous membrane with nonwoven support. This Nonwoven support provides mechanical strength to membrane while filtration process and minimizes membrane fouling. Hence it helps in better membrane performance in terms of salt rejection, improved flux, thermal stability and fairly increases in proton conductivity. In this work we have used K.C.270 nonwoven material consisting of fine polyester fibers and has a thickness of below 110 μm.