可重构制造系统重组过程中设备选择模型的研究

根据生产任务选择加工设备进行制造资源重组是实现可重构制造系统的关键问题之一，由于设备的选择涉及到多种因素，既有定量指标，又有定性指标，传统的依靠人工经验的方法显得力不从心。本文首先结合实际情况，提出了一套设备选择评价体系，通过对模糊判断矩阵采用最小对数二乘法确定各评价因素的权重系数，针对定性指标和定量指标采用不同的方法确定其性能指标值，通过模糊积分对评判指标进行综合评判，最后进行了实例研究。所提出的方法有效地简化了决策过程，为可重构制造系统设备选择提供了一套行之有效的方法。     

Robust Speed Control of a Low Damped Electromechanical System Based on CRONE Control: Application to a Four Mass Experimental Test Bench

Robust speed control of a low damped electromechanical system with backlash is studied, controlled load angular speed being not measured. The proposed control strategy combines a Luenberger observer (load angular speed and load torque disturbance estimations) and a robust CRONE controller. The observer provides estimation of the load angular speed and of the disturbance torque applied on the load. Through the computation of only three independent parameters (as many as a PID controller), the CRONE controller permits to ensure the robust speed control of the load in spite of plant parametric variations and speed observation errors. The proposed control strategy is applied to a four mass experimental test bench.     

NMR investigation of concentrated alumina and silica slurries

The longitudinal relaxation times (T₁) of water in concentrated silica and alumina slurries were measured as a function of solids content. It was shown that the results could be fit very well with a two-phase fast-exchange model between free and surface-bound water. As expected, values of T₁ for bound water were in the order of 20–2000 times lower than that for free water, indicating a higher effective viscosity of the surface-bound water. The strength of the interaction depended on the particular surface, and all of the aluminas examined interacted more strongly with water than the two silicas studied, which themselves differed considerably. The chemical mechanical polishing (CMP) removal rate of tantalum by silica slurries was shown to be directly correlated with the interaction parameters, derived from the NMR relation times rather than with total surface hydroxyl group concentration.     

Thermal Stability Of Folic Acid in the solid-state

This study attempts to identify the degradative process which folic acid undergoes in the solid-state under thermal stress. In order to facilitate the process, the various pieces of the chemical structure, namely, p-amino benzoic acid, pterin and glutamic acid as both its d- and l-isomers were investigated as separate entities. These structured solid-state pieces were then compared to the composite solid state folic acid degradative curves in order to identify the peaks seen and provide direction for the interpolation of the degradative mechanism. It was observed that none of the structural pieces could be superimposed as assumed earlier and hence an attempt was made to identify the decomposition products using various analytical techniques such as infrared spectroscopy, mass spectroscopy and X-ray diffraction which suggested that the glutamic acid fragment is lost first as evidenced by acid loss and amide enhancement in the IR spectra. The vitamin was ultimately degrading to carbon fragments and that further identification was not necessary. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preparation, characterization and thermolysis of metal nitrate complexes with 4,4’-bipyridine

Two bis(bipyridine) polymeric metal nitrate complexes with 4,4’-bipyridine of simple formula like [M(bipy)₂](NO₃)2⋅xH₂O (where M=Co, Ni and Cu; x=4, 2 and 0, respectively) have been prepared and characterized. Their thermal decomposition has been undertaken using simultaneous TG-DTG-DTA and DSC in nitrogen atmosphere and non-isothermal TG in air atmosphere. Isothermal TG has been performed at decomposition temperature range of the complexes to evaluate the kinetics of decomposition by applying model-fitting as well as isoconversional method. Possible mechanistic pathways have also been proposed for the thermolysis. Ignition delay measurements have been carried out to investigate the response of these complexes under the condition of rapid heating.     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.     

四氯化碳制备二氯卡宾反应机理的理论研究

四氯化碳制备二氯卡宾反应机理的理论研究李来才（四川师范大学化学系成都６１００６６）关键词四氯化碳反应途径过滤态ＭＮＤＯ方法中图分类号Ｏ６２１．１４６二氯卡宾是有机合成中一个重要的试剂。目前制备二氯卡宾的方法有多种［１－３］，但Ｍａｋｃ－ｓｚａ［４］报...     

The application of the measurement uncertainty concept to in-process control in pharmaceutical development

 Any analytical data is used to provide information about a sample. The "possible error" of the measurement can be of extreme importance in order to have complete information. The measurement uncertainty concept is a way to achieve quantitative information about this "possible error" using an estimation procedure. On the basis of the analytical result, the chemist makes a decision on the next step of the development process. If the uncertainty is unknown, the information is not complete; therefore this decision might be impossible. The major problem for the in-process control (IPC) procedure is that not only the repeatability but also the intermediate precision (which expresses the variations within laboratories related to different days, different analysts, different equipment, etc.) has to be good enough to make a decision. Unfortunately, the statistical information achieved from one single analytical run only gives information about the repeatability. This paper shows that the estimation of the measurement uncertainty for IPC is a way to solve the problem and gives the necessary information about the quality of the procedure. An example demonstrates that an estimate of uncertainty based on the standard deviations of an analytical method gives a value similar to one based on the standard deviations obtained from a control chart. Therefore, the estimation is both a very useful and also a very cost-effective tool. Though measurement uncertainty cannot replace validation in general, it is a viable alternative to validation for all methods that will never be used routinely. Received: 24 May 1996 Accepted: 10 August 1996     

Photocatalytic degradation of sulfadiazine in suspensions of TiO2 nanosheets with exposed (001) facets

Antibiotics such as sulfonamides are widely used in agriculture as growth promoters and medicine in treatment of infectious diseases. However, the release of these antibiotics has caused serious environmental problems. In this paper, photocatalytic oxidation technology was used to degrade sulfadiazine (SDZ), one of the typical sulfonamides antibiotics, in UV illuminated TiO₂ suspensions. It was found that TiO₂ nanosheets (TiO₂-NSs) with exposed (001) facets exhibit much higher photoreactivity towards SDZ degradation compared to TiO₂ nanoparticles (TiO₂-NPs) with a rate constant increases from 0.017 min⁻¹ to 0.035 min⁻¹, improving by a factor of 2.1. Under the attacking of reactive oxygen species (ROSs) such as superoxide radicals (O₂^–) and hydroxyl radicals (OH), SDZ was steady degraded on the surface of TiO₂-NSs. Based on the identification of the produced intermediates by LC–MS/MS, possible degradation pathways of SDZ, which include desulfonation, oxidation and cleavage, were put forwards. After UV irradiation for 4 h, nearly 90% of the total organic carbon (TOC) can be removed in suspensions of TiO₂-NSs, indicating the mineralization of SDZ. TiO₂-NSs also exhibits excellent stability in photocatalytic degradation of SDZ in wide range of pH. Even after recycling used for 7 times, more than 91.3% of the SDZ can be efficiently removed, indicating that they are promising to be practically used in treatment of wastewater containing antibiotics.