Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.     

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.     

Ion Pairing in Protic Ionic Liquids Probed by Far‐Infrared Spectroscopy: Effects of Solvent Polarity and Temperature

The cation–anion and cation–solvent interactions in solutions of the protic ionic liquid (PIL) [Et₃NH][I] dissolved in solvents of different polarities are studied by means of far infrared vibrational (FIR) spectroscopy and density functional theory (DFT) calculations. The dissociation of contact ion pairs (CIPs) and the resulting formation of solvent‐separated ion pairs (SIPs) can be observed and analyzed as a function of solvent concentration, solvent polarity, and temperature. In apolar environments, the CIPs dominate for all solvent concentrations and temperatures. At high concentrations of polar solvents, SIPs are favored over CIPs. For these PIL/solvent mixtures, CIPs are reformed by increasing the temperature due to the reduced polarity of the solvent. Overall, this approach provides equilibrium constants, free energies, enthalpies, and entropies for ion‐pair formation in trialkylammonium‐containing PILs. These results have important implications for the understanding of solvation chemistry and the reactivity of ionic liquids.     

金属串配合物[MoMoCo(npo)4(NCS)2]的配位结构及其与电场的关系

应用密度泛函理论B3LYP方法研究了具有分子导线潜在应用的金属串配合物[MoMoCo(npo)4(NCS)2](npo=1,8-萘基-2-酮)的配位结构及其受电场作用的影响。配位方式记为(n,m),其中n、m分别表示4个赤道配体npo^-的O与Co和Mo配位的个数:n=0,1,2,3,4;m=4,3,2,1,0。结果表明:(1)零电场下,基态能量高低为(0,4)>(4,0)>(3,1)≈(1,3)>(2,2),5种配位方式均可稳定存在且互为竞争态。Z方向偶极矩μ(Z)值大小为(0,4)(+)>(1,3)(+)>(2,2)(-)>(3,1)(-)>(4,0)(-)(+、-表示μ(Z)值的正负,与Z方向相同即为正,相反即为负),4个npo^-趋向越一致能量越高极性越大。(2)Mo-Mo具有四重键,键长随μ(Z)值减小而减小,而Mo-Co键长则相反。随μ(Z)值减小前线轨道中πNCS(1)轨道能降低,π'NCS(2)轨道能升高。(3)Z方向电场作用下,除(0,4)外所有配位方式的Mo1-N8键显著增长,结构不稳定。(4)电场作用下前线轨道能级交错,μ(Z)为正值的(0,4)、(1,3)的能隙E_LUMO-HOMO在-Z方向电场中降低更显著,μ(Z)为负值的(2,2)、(3,1)和(4,0)的能隙在Z方向电场中降低更显著。分子极性越大,随电场强度增强能隙降低越显著,分子导电性可能越好。(0,4)、(3,1)和(4,0)可能具有整流效应,但(3,1)和(4,0)的稳定性较低。     

Effect of double AlN buffer layer on the qualities of GaN films grown by radio-frequency molecular beam epitaxy

This paper reports that the GaN thin films with Ga-polarity and high quality were grown by radio-frequency molecular beam epitaxy on sapphire （0001） substrate with a double A1N buffer layer. The buffer layer consists of a high-temperature （HT） A1N layer and a low-temperature （LT） A1N layer grown at 800℃ and 600℃, respectively. It is demonstrated that the HT-A1N layer can result in the growth of GaN epilayer in Ga-polarity and the LT-A1N layer is helpful for the improvement of the epilayer quality. It is observed that the carrier mobility of the GaN epilayer increases from 458 to 858cm^2/V.s at room temperature when the thickness of LT-A1N layer varies from 0 to 20nm. The full width at half maximum of x-ray rocking curves also demonstrates a substantial improvement in the quality of GaN epilavers by the utilization of LT-A1N layer.     

3H‐1,2‐Dithiole‐3‐thione derivatives as novel solvatochromic dyes

The UV–Vis spectrum of 5‐(1‐butylthio)‐3H‐1,2‐dithiole‐3‐thione (1a) and that of the chromium pentacarbonyl complex of 5‐methyl‐3H‐1,2‐dithiole‐3‐thione (3) present significant changes with the solvent polarity. The two absorption bands shown by the compounds in the region above 300 nm were identified by theoretical calculations. For Compound 1a these are n→π^* and →π^* transitions and for Compound 3 the longest wavelength absorption corresponds to a charge transfer band and shows a remarkably negative solvatochromism. Not only has the wavelength of maximum absorption changed with the solvent but also the ratio of the absorbances at the two wavelengths. The effect of solvents was correlated with solvatochromic parameters such as π^* and α. The spectrum of 5‐(1‐butylthio)‐3H‐1,2‐dithiole‐3‐one ( 2 ) was also measured in different solvents but in this case the changes observed are less significant than for the other two compounds. The spectra of 1a and 3 were also determined in the presence of anionic (SDS), cationic (CTAB), and neutral surfactants (Brig‐35) and it is shown that these compounds can be used as probes for the polarity of the binding sites of organized assemblies. Copyright © 2008 John Wiley & Sons, Ltd.     

Role of gallium wetting layer in high-quality ZnO growth on sapphire (0001) substrates

ZnO is a wide direct bandgap (Eg=3.37 eV at room temperature) II-VI compound semiconductor of wurtzite structure (a = 3.249 ? c = 5.207 ?. Compared to GaN and ZnS, ZnO has a larger exciton binding energy, ~60 meV (cf. ~25 meV for GaN and ~40 meV for ZnS), which is advantageous to realizing low-threshold excitonic lasers. Since optically pumped UV lasing of ZnO at room temperature was reported in 1997[1], much attention has been paid to the crystal quality improvement and p-type conduc…     

ΔENT Values for 1-Methyl-2-pyrrolidinone--SolventBinary Mixtures at 20, 30, and 50 °C

E ^N _T values were determined for 8 1-methyl-2-pyrrolidinone--solvent mixturesover the whole mole fraction range at 20, 30, and 50°C. The solvents used wereacetone, dimethyl sulfoxide, 2-propanol, 1,2-dichloroethane, water, 1,4-dioxane,benzyl alcohol, and hexamethylphosphoric triamide. The E ^N _T values werepositive for the NMP + solvent systems, except for the NMP + water system.     

Surface free energy of films of alkali-treated cellulose microfibrils from banana rachis

Cellulose microfibrils extracted by various alkaline treatments of vascular bundles from banana rachis were used to elaborate films. The films were comparatively studied to determine changes in polarity induced by various treatments. Atomic force microscopy was used to characterize the surface morphology of the films and transmission electron microscopy was employed to characterize the microfibrils used to elaborate the films. Contact angles were measured to determine surface free energy (SFE) and thermogravimetric analyses were carried out to determine changes in composition of the films. The results showed that the films of cellulose microfibrils prepared by the peroxide alkaline (PA) and peroxide alkaline-hydrochloric acid (PA-HCl) treatments had lower content of non-cellulosic constituents like xylose and had lower SFE than films of microfibrils treated with KOH-5. Furthermore, specimens treated with the most concentrated KOH solution (18 wt%) and sodium chloride presented the highest SFE and polar component.     

First‐principles calculations of the stability and electronic properties of the PbTiO3 (110) polar surface

The structural and electronic properties of five terminations of cubic lead titanate (PbTiO₃) (110) polar surface were investigated by first‐principles total‐energy calculations using a periodic slab model. On the PbTiO termination, an anomalous filling of conduction band was observed, whereas on the O₂ termination, two surface oxygen atoms formed a peroxo group, demonstrating that the electronic structures of the two stoichiometric terminations undergo significant changes with respect to bulk materials. However, for the three nonstoichiometric TiO‐, Pb‐, and O‐terminated surfaces, their electronic structures are very similar to bulk. Charge redistribution results for the five terminations confirmed that electronic structure and surface composition changes are responsible for their polarity compensation. However, which mechanism actually dominates the stabilization process depends upon energetic considerations. A thermodynamic stability diagram suggested that the two stoichiometric terminations are unstable; however, the three nonstoichiometric terminations can be stabilized in some given regions. Furthermore, this study indicates that the very different stabilities and surface states filling behaviors of the PbTiO₃ (110) polar surface with respect to SrTiO₃ and BaTiO₃ ones seem to originate from the partially covalent characteristics of Pb O pairs. © 2008 Wiley Periodicals, Inc. J Comput Chem 2009