Identification of estrogenic/anti-estrogenic compounds in diesel exhaust particulate extract

Diesel exhaust particulate extract (DEPE) was obtained from diesel exhaust particulates with Soxhlet extraction using dichloromethane. After separating DEPE into 11 fractions by liquid-liquid extraction, the neutral fraction (N) showed anti-estrogenic activity and the weak acid (phenol) fraction (WA(P)) showed estrogenic and anti-estrogenic activities by a yeast two-hybrid assay system expressing human estrogen receptor alpha. Both fractions were thoroughly fractionated by silica gel column chromatography and reversed-phase HPLC. In the WA(P) fraction, 3-methyl-4-nitrophenol and 2,6-dimethyl-4-nitrophenol were identified by LC-MS/MS as estrogenic compounds. This is the first study to identify 2,6-dimethyl-4-nitrophenol in DEPE and the first study to show that it is an estrogenic compound. In the N fraction, 1-hydroxypyrene was also identified by LC-MS/MS as an anti-estrogenic compound.     

Simultaneous determination of suspended particulate trace metals (Co, Ni, Cu, Zn, Cd and Pb) in seawater with small volume filtration assisted by microwave digestion and flow injection inductively coupled plasma mass spectrometer

A new technique for the determination of suspended particulate trace metals (P-metals >0.2 μm), such as Co, Ni, Cu, Zn, Cd and Pb, in open ocean seawater has been developed by using microwave digestion coupled with flow injection inductively coupled plasma mass spectrometry (FI-ICP-MS). Suspended particulate matter (SPM) was collected from 500 mL of seawater on a Nuclepore filter (0.2 μm) using a closed filtration system. Both the SPM and filter were completely dissolved by microwave digestion. Reagents for the digestion were evaporated using a clean evaporation system, and the metals were redissolved in 0.8 M HNO₃. The solution was diluted with buffer solution to give pH 5.0 and the metals were determined by FI-ICP-MS using a chelating adsorbent of 8-hydroxyquinoline immobilized on fluorinated metal alkoxide glass (MAF-8HQ). The procedure blanks with a filter were found to be 0.048 ± 0.008, 10.3 ± 0.3, 0.27 ± 0.05, 3.3 ± 1.8, 0.02 ± 0.03 and 0.85 ± 0.09 ng L⁻¹ for Co, Ni, Cu, Zn, Cd and Pb, respectively (n = 14). Detection limits defined as 3 times the standard deviation of the blanks were 0.023, 0.90, 0.14, 5.3, 0.078 and 0.28 ng L⁻¹ for Co, Ni, Cu, Zn, Cd and Pb, respectively. Accuracy was evaluated using certified reference materials of chlorella (NES CRM No. 3) and marine sediment (HISS-1). The method was applied to the determination of vertical distributions for P-Co, Ni, Cu, Zn, Cd and Pb in the Western North Pacific.     

Organophosphate esters in water,suspended particulate matter (SPM) and sediments of the Minjiang River,China

As organic pollutants of emerging concern, organophosphate esters (OPEs) have shown toxicity to organisms after entering the water environment. However, research on OPEs in freshwater in Southwest China is very limited. The levels, distribution and partitioning behavior of OPEs in the Minjiang River and their influencing factors is still unknown. In this study, six OPEs, tri-n-butyl phosphate (TnBP), tri(2-chloroethyl)-phosphate (TCEP), trichloropropyl phosphate (TCPP), triphenyl phosphate (TPhP), tributoxyethyl phosphate (TBEP), and tris(2-ethylhexyl)-phosphate (TEHP), were determined in surface water, suspended particle matter (SPM) and sediments of the Minjiang River. The results showed that the average concentrations of Σ₆OPEs in surface water, SPM and sediments of the Minjiang River were 199.32 ± 124.95 ng/L, 38463.79 ± 45641.89 ng/g dry weight (dw) and 76.45 ± 28.00 ng/g dw, respectively. High concentrations of OPEs were detected in SPM samples, indicating that more attention should be paid to pollution in SPM. It is worth noting that the variation trend of OPEs in SPM was almost opposite to that in water but basically similar to that in sediment. The proportions of alkyl OPEs in Σ₆OPEs increased from surface water to SPM and sediments. Alkyl OPEs were the main pollutants in SPM (10.44%–80.88% of Σ₆OPEs, mean of 54.52%) and sediments (59.08%–81.30% of Σ₆OPEs, mean of 68.91%), whereas chlorinated OPEs were the most abundant components in surface water (43.16%–75.99% of Σ₆OPEs, mean of 55.50%). The water-sediment partition coefficient (logK_OC) of OPEs was 4.97–7.58, while the water-SPM partition coefficient was 6.71–10.00. No significant correlations were found between logK_OW and logK_OC. K_OW was not the main factor affecting the distribution of OPEs in the Minjiang River, China.     

液相色谱-高分辨质谱技术在沉积物和颗粒物中有机污染物分析的研究进展

该文综述了基于液相色谱－高分辨质谱联用（LC－HRMS）技术开展的沉积物和颗粒物中有机污染物分析的研究进展,包括LC－HRMS分析策略、分析流程及其在目标物、可疑物和非目标物分析中的实际应用,重点介绍了高通量分析、新兴污染物筛查、不同数据库的特点及应用、未知化合物鉴定置信水平、数据非依赖性采集和优先级策略等内容,初步探讨了该技术目前存在的问题并对其发展和应用进行了展望,以期进一步提高识别和鉴定工作的效率,更好地开展环境样品中有机污染物的筛查和监测研究。文中涉及的高分辨质谱的相关通用性内容,也为该技术在其他领域的应用提供了一定的参考和启发。     

固相微萃取-气相色谱串联质谱法检测北京大气细颗粒物中的多环芳烃

采用固相微萃取与气相色谱串联质谱联用,建立了快捷测定大气细颗粒物(PM2.5)中16种优控多环芳烃的方法.目标物先用二氯甲烷富集浓缩,然后用100 μm聚二甲基硅氧烷萃取纤维,通过超声萃取方式,在60℃条件下,萃取30 min.在优化的在多反应监测模式下,方法回收率在56.8％ ～ 106.0％之间,检出限为0.022～0.056 ng/m3.应用此方法检测了清华大学采样点采取的2013年1月1到15日北京PM2.5空气样品中的16种PAHs,实验结果表明,PAHs总质量浓度在290～1812 ng/m3之间,其中四环PAHs的总质量浓度最大(145 ～937 ng/m3),其次是五环PAHs(总质量浓度81.1～664.5 ng/m3),分子质量浓度较高的依次是荧蒽、芘、苯并(b)荧蒽、(蕴)、苯并(a)芘、苯并(k)荧蒽、苯并(a)蒽和菲,PAHs的污染主要来源于化石燃料燃烧和机动车排放.     

Analytical method for the determination of mycotoxins in indoor/outdoor airborne particulate matter by HPLC-MS-MS

An effective analytical method for the screening of mycotoxins, in indoor/outdoor airborne particulate matter, was developed and method performance data are presented. Mycotoxins are natural compounds produced, in particular conditions, as secondary metabolites by filamentous fungi and moulds, and, after their production, they can be transported far from their source. To simulate real samples, an urban dust (reference material 1649a) free from mycotoxins was used as matrix and spiked by the most common mycotoxins, chosen on the basis of studies carried out previously in other real matrices: deoxynivalenol, aflatoxin B1, ochratoxin A, T-2 toxin, zearalenone and sterigmatocystin. The analytical method was optimised and structured in four successive steps: (1) accelerated solvent extraction of the (spiked) analytes from matrix, (2) solid-phase purification (SPE) of the previous extract, (3) pre-concentration of the eluates from SPE and (4) analysis of the concentrated eluates by high performance liquid chromatography tandem mass spectrometry in multiple reaction monitoring mode. After a proper sampling campaign, the method was applied to real indoor and outdoor particulate matter samples, where the clean-up step showed to be very effective and fundamental to avoid misleading analytical results.     

An international round-robin study for the analysis of particulate semi-volatile organics by thermal desorption gas chromatography mass spectrometry

Thermal desorption gas chromatography mass spectrometry (TD-GC/MS) is becoming more commonly used for the quantification and identification of organic compounds in particulate matter (PM), including ambient and source PM such as diesel particulate matter (DPM). It has been proven as an alternative to the traditional solvent extraction (SE) method and liquid injection gas chromatograph mass spectrometry (LI-GC/MS). However, little information is available on how different types of TD-GC/MS systems compare to each other for analysis of real-world PM samples or to direct LI-GC/MS for analysis of PM components in a test solution. To address this, CanmetENERGY Characterization Laboratory initiated a round robin with the participation of 10 laboratories worldwide. Three sample types were analysed: (i) a test solution with a suite of pure compounds commonly found in PM, analysed by TD-GC/MS and LI-GC/MS; (ii) a DPM sample, analysed by TD-GC/MS and SE; and (iii) an ambient PM sample, analysed by TD-GC/MS. The first part of the study showed good overall performance and comparability between the different TD-GC/MS systems and LI-GC/MS method for the analysis of PM components in a test solution, with some variability of results due to system types and parameters used, concentration of calibration standards, and whether or not an internal standards was used. The analysis of the DPM sample showed greater variability between laboratories and methods as many PM components were present near the detection limit and matrix effects particularly affected the TD-GC/MS analysis of heavier n-alkanes. In the last part of the study, for the analysis of an ambient PM sample by TD-GC/MS, the analysis of variance showed good comparison between labs for polycyclic aromatic hydrocarbons (94% non-significant), but slightly lower for n-alkanes (68%) and biomarkers (57%).     

A new analytical methodology for a fast evaluation of semi-volatile polycyclic aromatic hydrocarbons in the vapor phase downstream of a diesel engine particulate filter

A new sampling method was developed to collect vapor-phase polycyclic aromatic compounds (PAHs) downstream of a diesel engine equipped with a diesel particulate filter (DPF). This configuration allowed us to collect separately the particulate phase, which was trapped inside the DPF, and the vapor phase, which was sampled downstream of the DPF. PAHs, which were not predominantly absorbed into the poor organic fraction of the diesel soot, but were rather physically sorbed on high energetic adsorption sites, should be extracted using very drastic extraction conditions Microwave-assisted extraction using solvent mixtures composed of pyridine and diethylamine were used to desorb particulate PAHs, and the total PAH amounts corresponded to a very low value, i.e., 8 μg g⁻¹ or 0.24 μg km⁻¹, with a predominance of low weight PAHs. For collection of the vapor phase, gas bubbling in an aqueous medium was preferred to conventional methods, e.g., trapping on solid sorbents, for several reasons: aqueous trapping allowed us to use a solid phase enrichment process (SPE) that permitted PAH sampling at the sub-picogram levels. Consequently, low volume sampling was possible even if the sampling duration was very short (20 min). Additionally, the amount of time saved for the analysis was considerable when coupling SPE to the analytical system (liquid chromatography with fluorimetric detection). Solvent consumption for the overall sampling and analytical processes was also drastically reduced. Experiments on a diesel engine showed that vapor phase samples collected downstream of the DPF contained all of the 15 target priority PAHs, even the heaviest ones. The total vapor-phase PAH amount was 6.88 μg N m⁻³ or 10.02 μg km⁻¹, which showed that the gaseous fraction contains more PAHs than the particulate fraction. Partitioning coefficients (K_p) were estimated showing the predominance in the vapor phase of all the PAHs. However, the DPF technology effects a considerable decrease in the total PAH emission when compared to non-equipped diesel vehicles.     

Determination of Particulate Atomospheric Benzoic Acid by Ion Chromatography with Ultraviolet Detection

Abstract

A simple method involving ion chromatography with ultraviolet detection (IC-UV) is applied to the determination of benzoic acid in atmospheric samples. The detection limit is 10 nanograms. Validation and interference studies are described. The application of the IC-UV method to other aromatic acids including nitrophenols is briefly discussed.     

Noninvasive molecular identification of particulate matter in lungs by Raman microspectrometry

A new method for the analysis of particulate matter in lungs is proposed. It combines the exhaled breath condensate technique and Raman spectroscopy. The sampling method is noninvasive, which is suitable for the detection of occupational exposure to dust. The chemical composition of dust particles is assessed by Raman microspectroscopy. The effectiveness of this method as a means of identifying markers of occupational exposure to mica dust is evaluated. Copyright © 2011 John Wiley & Sons, Ltd.