采用一阶导数光谱研究[PtCl6]2-的可控水解

通过紫外吸收光谱、导数光谱以及溶液电导率的变化研究了紫色光对[PtCl6]2-水解过程的影响规律.     

Transient Spectroscopic Properties of [60] Fullerene—Containing Cyclic Sulphoxide

The properties of the triplet excited state of [60] fullerene-containing cyclic sulphoxide have been investigated by time-resolved absorption spectroscopy. Transient absorption bands of [60] fullerene-containing cyclic sulphoxide showed two decay-components, which wrer attributed to triplet excited states of different spin multiplicity. The properties of photoexcited states of [60] fullerene-containing cyclic sulphoxide are also reported.     

Decomposition of 1-(ω-aminoalkanoyl)guanidines under alkaline conditions

The decomposition of some N^G-(ω-aminoalkanoyl)argininamides, which are key intermediates for the preparation of radiolabeled and fluorescent neuropeptide Y receptor ligands, prompted us to synthesize a small series of simple 1-(ω-aminoalkanoyl)guanidines, and to investigate these model compounds for stability in alkaline buffers. The degradation of acylguanidines was monitored by time resolved UV spectroscopy. The most labile compound, 1-(5-aminopentanoyl)guanidine, decomposed with a half life of 19 s to yield piperidin-2-one (pH 10.4 at 25 °C). In contrast the half life of 1-(6-aminohexanoyl)guanidine is 7.7 h, which is comparable to the hydrolysis of acetylguanidine (t_1/2 = 9.6 h) in alkaline solution.     

Trace analysis of selected benzidine and diaminodiphenylmethane derivates in urine by means of liquid chromatography using precolumn sample preconcentration,UV and electrochemical detection

Summary For the title compounds 4,4-DADPM, MOCA, 3,3-DCB, 4-ADP and 4-ADPA listing on the EPA priority pollutant list, an analytical practicable, reliable, reproducible and sensitive procedure is required. Therefore a new method has been developed for the routine determination of these toxic aromatic amines in urine at the ppb level. The quantitative determination of amines is a suitable procedure of occupationally exposed persons. Urine sample preparation is done using simple liquid-liquid extraction followed by a precolumn enrichment (PRP₁-material; Hamilton). Breakthrough measurements were done using an enrichment column packed with PRP₁ material. The capacities of the studied amines ranged from 21.9mg/g to 96.6mg/g, while influent concentrations differed from 28.3mg/l to 332.0mg/l. The advantages of electrochemical detection regarding to selectivity and sensitivity are clearly indicated in this paper. Separation has been achieved applying reversed-phase-high-performance-liquid chromatography (LiChrosorb RP 18/5m) followed by electrochemical or UV-detection. The detection limits employing an electrochemical detector at a potential of 1 V range from 2.2ng to 12.1ng. UV detection at 254 nm and 280 nm is about 10–100 times less sensitive. Recoveries from spiked water samples at the 5ppb levels were 75% to 96% respectively. The standard deviation of the developed procedure varies from 5.3% to 14%. Day-to-day repeatability is good.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

XPS and XAES analysis of copper,arsenic and sulfur chemical state in enargites

Enargite, a copper arsenic sulfide with the formula Cu₃AsS₄ is of environmental concern due to its potential to release toxic arsenic species. The oxidation and dissolution of enargite are governed by the composition and chemical state of the outermost surface layer. Qualitative and quantitative analysis of the enargite surface can be initially obtained on the basis of X‐ray photoelectron spectroscopy (XPS) binding energy and intensity data. However, a more precise determination of the chemical state of the principal elements of enargite (copper, arsenic and sulfur) in the altered surface layer and in the bulk of the mineral requires a combined analysis based on XPS photoelectron lines and the corresponding X‐ray excited Auger lines. On the basis of results obtained on natural and synthetic enargite samples and on standards of sulfides and oxides, the Auger parameter α′ of different compounds was calculated and the Wagner chemical state plots were drawn for arsenic, copper and sulfur. Arsenic in enargite is found to be in a chemical environment similar to that of arsenides or elemental arsenic, whereas copper in enargite is in a chemical state that corresponds to copper sulfide, Cu₂S, for all samples irrespective of surface treatment (natural or freshly cleaved). Only sulfur changed from a chemical state similar to that of copper or iron sulfide in freshly cleaved samples to another state in natural enargite in the as‐received state. Thus, it is the sulfur atom at the surface of enargite that is most susceptible to changes in the enargite surface state and composition. A more detailed interpretation of this behavior, based on differences in the initial and final state effects, is proposed here. The concept of Auger parameter and chemical state plot, used here for the first time for investigating enargite, has proved to be a method to unambiguously assign the chemical state of the principal elements copper, arsenic and sulfur in these minerals. Copyright © 2006 John Wiley & Sons, Ltd.     

Photoinitiators for UV and visible curing of coatings: Mechanisms and properties

The radiation curing industry is one of the most rapidly developing fields in the entire coatings industry. The low toxicity, cheapness, speed, control and ease of formulation and operation are some of the main advantages of this growing technology. UV and/or visible light radiation is used to induce photochemical polymerization or crosslinking of a monomer, oligomer or prepolymer formulation containing a certain type of unsaturation, such as an acrylic group, and an appropriate initiator. The latter is used to absorb the light energy and transform it into active species, such as radicals or ions, capable of inducing such reactions. Applications extend to general coatings for paper, board, wood, tapes, compact discs and holograms, inks, photoresists for imaging processes and adhesives for welding and sealing in electronic circuit boards. The photoinitiator is the key to the control of these processes and, in recent years, has seen many new developments. These include the need for water-soluble, co-reactive and polymeric structures with low migration rates, as well as cheaper UV/ visible sensitizers with enhanced speed. New and effective cationic systems are also on the scene and, although expensive, are attracting significant academic and commercial interest.     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.     

Dynamics of intramolecular processes in electronic-excited states of 2,4,5-triarylimidazole molecules

Intramolecular processes in electronic-excited states of 2,4,5-triarylimidazole molecules were studied by femtosecond laser spectroscopy. Experiments were carried out with two types of compounds, namely, those experiencing intramolecular proton transfer and two model compounds in which it is impossible. Schemes of the processes studied were proposed and the characteristic rate constants were determined. The excited-state intramolecular proton transfer (ESIPT) in the molecules with planar structure of the reaction center is a very fast process (100 fs). If the reaction center has a nonplanar structure and, hence, the intramolecular hydrogen bond is weakened, the ESIPT time is determined by the time of conformational rearrangement of the molecule.     

A Photophysical Study of Terphenyl Core Oligosulfonimide Dendrimers Exhibiting High Steady‐State Anisotropy

The photophysical properties of three dendrimers containing a p‐terphenyl core with appended sulfonimide branches of different size and n‐octyl chains have been investigated in dichloromethane solution. In the dendrimer absorption spectra contributions from both the branches and the core are clearly identified. The fluorescence spectra show only the characteristic fluorescence of the terphenyl unit. Energy transfer from the appended chromophoric groups to the core does not occur. In the dendrimers, the terphenyl core exhibits a very high fluorescence quantum yield (ca. 0.75) and a short emission lifetime (0.8 ns). These properties allowed investigations of the fluorescence depolarization caused by rotation of the dendrimers. The dendrimers show a very high steady‐state anisotropy in dichloromethane solution at room temperature (0.24 for the largest one), compared to that of the parent terphenyl under the same experimental conditions (<0.01) and in rigid matrix (0.33). Both the n‐octyl chains and the sulfonimide branches play important roles to slow down the molecular rotation.