以多聚甲醛为还原剂制备新型阳极Pt/CMK-3催化剂

 以多聚甲醛为还原剂,采用液相还原法制备了Pt/CMK-3直接甲醇燃料电池(DMFC)阳极催化剂,并采用透射电镜和X射线衍射技术对其进行了表征. 结果表明,有序介孔碳CMK-3具有规整的二维有序孔道结构,为DMFC中电子和燃料的传输提供了方便的路径,同时它较大的比表面积使得Pt纳米粒子很好地分散在其表面; Pt/CMK-3催化剂中Pt粒子的平均粒径为2.8 nm, 小于E-TEK公司的商品化Pt/XC-72和以甲醇为还原剂制备的Pt/C-M催化剂,并且粒径分布范围窄,结晶度低. 察了Pt/CMK-3催化剂对甲醇的电催化氧化性能,发现Pt/CMK-3催化剂对甲醇氧化的电催化性能优于Pt/XC-72和Pt/C-M催化剂.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Electrochemical instability of bis(trifluoromethylsulfonyl)imide based ionic liquids as solvents in high voltage electrolytes for potassium ion batteries

1. Download : Download high-res image (153KB)
2. Download : Download full-size image

     

Effects of pH and Dye Concentration on the Optical and Structural Properties of Coumarin-4 Dye-Doped SiO2-PDMS Xerogels

Optical and structural properties of coumarin-4 dye-doped SiO₂-PDMS xerogels synthesized by acid catalyzed (one-step) and acid-base catalyzed (two-step) sol-gel routes with varying pH (0.6 to 7) and dye content ( 5 × 10^–4 to 5 × 10^–2 mole) are reported. Spectroscopic methods such as photo-luminescence, FT-IR and FT-Raman were used for characterizations. The acid catalyzed xerogels prepared with pH < 2.5 exhibited two fluorescence peaks, I at 390 nm and II at 480 nm. The acid-base catalyzed xerogels synthesized with pH < 2.5 also exhibited two peaks, I at 400 nm and II at 475 nm. Peak II was not observed for the samples with pH 2.5. This phenomenon was attributed to the existence of pH dependent different forms of coumarin-4 molecule. The concentration-quenching phenomenon was observed for the acid catalyzed xerogels prepared with different dye concentration. TheFT-IR spectra indicated the existence of hydrogen bonds between the carbonyl groups of dye molecules and the silanol groups of gel matrix. The hydrogen bonding was the highest for the samples with the extremity pH, 0.6 and 7, resulting in the highest dye/gel matrix interactions, hence, the highest fluorescence peaks. The Raman studies indicated that the samples prepared with pH < 2.5 possessed relatively more number of 3-membered siloxane rings than 4-membered siloxane rings. The ring statistics was reversed for the samples with pH > 2.5. The number of silanol groups was higher for the samples with pH > 2.5.     

氧化共沉淀法制备纳米级掺锑α—Fe2O3气敏陶瓷粉料

氧化共沉淀法制备纳米级掺锑α┐Ｆｅ２Ｏ３气敏陶瓷粉料王忠春＊＊刘尔生陈耐生＊黄金陵（福州大学化学系福州３５０００２）关键词α－Ｆｅ２Ｏ３陶瓷，锑掺杂气敏材料，纳米材料１９９６－１０－０５收稿，１９９７－０４－２２修回福建省科委资助项目＊＊现在上海硅酸...     

聚二巯化合物正极材料的合成及性质的初步研究

固态电池发展至今，许多比能量高、贮存性能好的新型电池产品不断涌向市场，而目前广泛用于正极材料的大多数物质是层状化合物［１］，如聚乙炔，聚苯胺等化合物，它们贮存能量的方式主要是通过插入化学反应来实现，本工作将合成一种高分子材料——２．５－二巯基－１，３...     

手性液晶掺杂剂（S）—4‘—辛氧基—4—（2—酰氧基—丙氧基）联苯的合成

手性液晶掺杂剂（Ｓ）┐４┐辛氧基┐４┐（２┐酰氧基┐丙氧基）联苯的合成马汝建李培荣国斌＊（华东理工大学化学系上海２００２３７）关键词铁电液晶材料，手性液晶掺杂剂，合成，手征性１９９７－０２－０３收稿，１９９７－０８－０７修回铁电液晶显示器所用的材料...     

Evaluation of the sputtering rate variation in SIMS ultra‐shallow depth profiling using multiple short‐period delta layers

We have developed multiple short‐period delta layers as a reference material for SIMS ultra‐shallow depth profiling. Boron nitride delta layers and silicon spacer layers were sputter‐deposited alternately, with a silicon spacer thickness of 1–5 nm. These delta‐doped layers were used to measure the sputtering rate change in the initial stage of oxygen ion bombardment. A significant variation of sputtering rate was observed in the initial 3 nm or less. The sputtering rate in the initial 3 nm was estimated to be about four times larger than the steady‐state value for 1000 eV oxygen ions. Copyright © 2003 John Wiley & Sons, Ltd.     

负载型光催化材料CeO2-TiO2/SiO2的表面结构与光响应性能

采用表面改性法制备了负载型光催化材料CeO2-TiO2/SiO2,并用X射线衍射,比表面积测定,红外光谱,程序升温还原和紫外可见漫反射光谱技术对固体材料的结构和光响应性能进行了表征.结果表明,CeO2与TiO2在材料表面存在相互修饰作用,CeO2能拓展TiO2的光响应范围,使TiO2吸光区域由紫外拓宽至可见光区,从而提高材料的光能利用率;Ti4 可以进入CeO2晶格,形成Ce-O-Ti键合,使得Ti4 平均配位数增加,同时提高了CeO2体相晶格氧的活性;TiO2有助于提高CeO2在载体表面的分散程度,减小CeO2的微晶尺寸,提高固体材料的能隙值和氧化还原能力.