Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

过渡金属催化的1,6-烯炔环异构化反应

1,6-烯炔底物在过渡金属催化剂作用下的化学行为得到了广泛的研究,重点是关于过渡金属催化的1,6-烯炔环异构化反应.从反应机理角度入手,把1,6-烯炔环异构化反应按启动方式总结为三类,并对这三种方式启动的1,6-烯炔环异构化反应进行了详细地总结和阐述.     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

Microchemical Investigation of Archaeological Copper Based Artefacts Disclosing an Ancient Witness of the Transition from the Value of the Substance to the Value of the Appearance

In many Italian archaeological sites dated between the sixth and third centuries BC, unworked lumps of Cu-based materials are sometimes found, the so called Aes Rude, which according to archaeological considerations were appreciated as currency, as a medium of exchange and as a form of saving. The microchemical investigation of these ancient artefacts discloses their nature as apparently not usable for any functional applications or possible use. Indeed, Aes Rude resemble ordinary copper material, but microchemical results indicate that they are constituted by highly ferruginous leaded copper, making them useless for producing other metal objects by means of casting or hot and cold working. Notwithstanding this intrinsic negative feature, the production of these intractable Cu-based alloys was deliberately carried out to maximise the process yield in terms of produced metal from an impure and unselected metal ore by tailoring the smelting process parameters. With these considerations in mind, the microchemical investigation of these ancient iron–copper alloys gives evidence of the passage from the acceptance of an artefact value based on its true nature or potential use to the acceptance of the value based only on its appearance or form irrespective of its present or future use. This information could contribute to a better understanding of the evolution of human thought and economic and social interactions.     

双金属氰化络合物催化剂的形态及其对催化剂活性的影响

合成了多个基于钴氰化锌的双金属氰化络合物(DMC)催化剂,并对催化剂的结晶形态进行了表征.考察了制备过程中,有机配体及其引入方式,温度,搅拌速度对DMC催化剂形态的影响.其中有机配体对DMC催化剂形态的影响是最主要的.有机配体中富电子原子的电负性的强弱和数量共同影响着DMC催化剂的形态.该类原子的电负性越强,得到的DMC催化剂的结晶性越差,无定型部分的比例越高,并且单个原子的电负性强弱比该类原子的数量在此间的影响更大.而在有机配体预先存在的情况下,该沉淀体系则更有利于无定型部分的产生.在30℃左右的沉淀反应温度下,得到的DMC催化剂的无定型部分比例最高.在有机配体存在的情况下,搅拌速度对DMC催化剂形态的影响有限.并且发现存在于有机配体中的DMC催化剂随着时间的推移,形态会发生变化.初步揭示了DMC催化剂的形态与其催化活性间的关系.而无定型态的DMC催化剂更有利于PO的聚合.     

Diene complexes of early transition metals: ideas and progresses at Osaka University

Historical perspectives for the chemistry of diene complexes of early transition metals developed at Osaka University in the period after 1970s were reviewed briefly and personally. Preparative chemistry of this field commenced from the magnesium-diene 1:1 compounds and quickly extended to almost all the early transition metals. By the studies operated together with other researchers, unique features of these diene complexes, especially their bonding and structure, selective reactions, and catalysis performances are described.     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

Novel platinum-containing initiators for ring-opening polymerizations

A novel class of platinum-based initiating systems for the ring-opening polymerization of a wide variety of heterocyclic compounds including epoxides, oxetanes, and 1,3,5-trioxane have been discovered. In addition to a platinum complex as a catalyst, a cocatalyst, consisting of a compound or polymer containing silicon-hydrogen bonds must also be present. This article reports on a preliminary survey of the scope and limitations of these new initiator systems. Particular emphasis in this article has been placed on the ring-opening polymerization of epoxides which have been studied in some detail and which proceed rapidly and exothermically at room temperature. A number of mechanistic studies have been conducted and the best current evidence suggests that polymerization proceeds by a cationic mechanism. Evidence is also presented which suggests that platinum metal colloids may function as the active initiating species.     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.