Magnetic pole pinning at rectangular defects on MnAs/GaAs(0 0 1)

Strong magnetic poles at characteristic rectangular defects have been observed using a magnetic force microscope on a MnAs(  1 0 0) thin film with the thickness of 30 nm. The MnAs thin film was epitaxially grown on a GaAs(0 0 1) substrate. The magnetic poles were in one-arranging direction, being independent of the magnetization direction of the film. The poles were pinned at the edges of the rectangular defects until just below the Curie temperature, and formed a stable magnetic-field loop on the MnAs surface. The stability of the magnetic pole pinning shows the distinctive feature of the magnetic domain structure on the surface with a strong anisotropy, which was built in the heterostructure of MnAs and GaAs.     

Instability of Fabry-Perot interferometer with a multilayered paramagnetic filling

The results of the analysis of the stability of stationary solutions of wave equations discribing a behavior of the nonlinear Fabry-Perot interferometer with a saturated paramagnetic filling are presented in this paper. The cases when paramagnetic medium is characterized by a homogeneously and nonhomogeneously broadened line of the magnetic resonance have been considered. Areas of unstable behavior of these characteristics of the resonance structure have been found.     

Sulfur adsorption on Fe(1 1 0): a DFT study

The adsorption of atomic S on the Fe(1 1 0) surface is examined using density functional theory (DFT). Three different adsorption sites are considered, including the atop, hollow and bridge sites and the S is adsorbed at a quarter monolayer coverage in a p(2 × 2) arrangement. The hollow site is found to be the most stable, followed by the bridge and atop sites. At all three sites, S adsorption results in relatively minor surface reconstruction, with the most significant being that for the hollow site, with lateral displacements of 0.09 Å. Comparisons between S-adsorbed and pure Fe surfaces revealed reductions in the magnetic moments of surface-layer Fe atoms in the vicinity of the S. At the hollow site, the presence of S causes an increase in the surface Fe d-orbital density of states between 4 and 5 eV. However, S adsorption has no significant effect on the structure and magnetic properties of the lower substrate layers.     

e+e-实验中ψ(2S)能区连续态单光子湮没过程的贡献

研究了e+e-实验中ψ(2S)能区连续态单光子湮没过程的截面对观测总截面的贡献. 针对ψ(2S)质量处ωπ0和π+π-两个观测末态,利用唯象模型估计了单光子湮没过程贡献的大小. 分析表明,对于ψ(2S)→ωπ0和ψ(2S)→π+π-,以及其他电磁末态分支比的确定,单光子湮没过程的贡献必须认真考虑. 通过研究,我们认为对于BES实验来说,为了获得共振态电磁末态分支比的正确结果,至少需要在低于ψ(2S)共振峰的能量点采集10pb-1的数据.     

重力场与静电场特点的比较

“场”是一种客观存在的物质，但由于“场”具有不易直接感受的特殊存在形态，同学们对“场”的物质性的理解不够深刻，解决“场”的相关问题时也感到棘手．笔者就高中阶段最典型的两种场——“重力场”和“静电场”的力学性质与能量特点进行比较，使同学们对“场”的概念有更深刻的认识．     

Time resolved spectroscopic NMR imaging using hyperpolarized Xe

We have visualized the melting and dissolution processes of xenon (Xe) ice into different solvents using the methods of nuclear magnetic resonance (NMR) spectroscopy, imaging, and time resolved spectroscopic imaging by means of hyperpolarized ¹²⁹Xe. Starting from the initial condition of a hyperpolarized solid Xe layer frozen on top of an ethanol (ethanol/water) ice block we measured the Xe phase transitions as a function of time and temperature. In the pure ethanol sample, pieces of Xe ice first fall through the viscous ethanol to the bottom of the sample tube and then form a thin layer of liquid Xe/ethanol. The xenon atoms are trapped in this liquid layer up to room temperature and keep their magnetization over a time period of 11 min. In the ethanol/water mixture (80 vol%/20%), most of the polarized Xe liquid first stays on top of the ethanol/water ice block and then starts to penetrate into the pores and cracks of the ethanol/water ice block. In the final stage, nearly all the Xe polarization is in the gas phase above the liquid and trapped inside the pores. NMR spectra of homogeneous samples of pure ethanol containing thermally polarized Xe and the spectroscopic images of the melting process show that very high concentrations of hyperpolarized Xe (about half of the density of liquid Xe) can be stored or delivered in pure ethanol.     

Electron-active cyclotron resonance in p-doped InMnAs in high magnetic fields

We present a theoretical and experimental study of electron-active cyclotron resonance in p-doped InMnAs in high magnetic fields. Results are based on an 8-band Pidgeon–Brown model generalized to include finite k_z effects and s(p)–d exchange interaction between itinerant carriers and Mn d-electrons. The e-active transitions in the valence band in p-doped samples take place due to the nature of multiple valence bands (heavy and light holes). We have calculated the absorption spectra in high magnetic fields and identified optical transitions which contribute to the cyclotron resonance for both e-active and h-active polarizations. Calculations show agreement with experimental results.     

1,1‐Organoboration of bis(trimethylstannyl)ethyne with trimethylsilyl‐ and dimethylsilyl‐dialkylboryl‐substituted alkenes: organometallic‐substituted allenes

The reactions of bis(trimethylstannyl)ethyne, Me₃Sn–C?C–SnMe₃ ( 4 ), with trimethylsilyl‐ or dimethylsilyl‐dialkylboryl‐substituted alkenes 1 – 3 afford organometallic‐substituted allenes 5 , 6 and 8 , 9 in high yield. In the case of (E)‐2‐trimethylsilyl‐3‐diethylboryl‐2‐pentene ( 1) , a butadiene derivative 7 could be detected as an intermediate prior to rearrangement into the allene. All reactions were monitored by ²⁹Si and ¹¹⁹Sn NMR, and the products were characterized by an extensive NMR data set (¹H, ¹¹B, ¹³C, ²⁹Si, ¹¹⁹Sn NMR). Copyright © 2003 John Wiley & Sons, Ltd.     

机械结构因素对光电跟踪伺服系统性能的影响

为克服机械结构因素对光电跟踪伺服系统性能的不良影响,分析了转动惯量、结构谐振频率、摩擦力矩等伺服机械结构因素与伺服系统性能的关系,包括分析转动惯量与伺服系统性能的关系、结构谐振频率与伺服系统性能的关系、摩擦力矩与伺服系统性能的关系,探讨了消除或减小机械谐振的措施.该分析方法可应用于设计和制造响应速度快、跟踪精度高的光电跟踪伺服系统.