Adsorption of the Ternary Liquid Mixture Ethanol/n-Octane/n-Hexadecane onto Activated Carbon: I. The Adsorption Excess of the Ternary Mixture and of Its Binary Combinations

The adsorption isotherms of the binary mixtures of ethanol/n-Octane, ethanol/n-hexadecane and n-octane/n-hexadecane onto the activated carbon TA 95 were measured at 278 K, 288 K, 298 K and 308 K and described with mathematical functions. About 300 experimental values of the adsorption excess of the ternary mixture ethanol/n-octane/n-hexadecane onto activated carbon TA 95 at 298 K were measured by gas chromatography inside the ternary triangle. The ternary miscibility gap was determined at three temperatures. A good representation of the ternary data and the calculated activity coefficients (using the UNIFAC model) in three-dimensional space was possible with the help of transformation of coordinates. It was possible, too, by utilization of the conception of the quasi two-component representation of the mole fractions with and without miscibility gap. Several influencing factors on ternary adsorption isotherms were discussed for the system ethanol/n-octane/n-hexadecane/TA 95.     

Stability theorems for infinitely constrained mathematical programs

The primary concern of this paper is to investigate stability conditions for the mathematical program: findx E ⁿ that maximizesf(x):g ^j(x)0 for somej J, wheref is a real scalarvalued function and eachg is a real vector-valued function of possibly infinite dimension. It should be noted that we allow, possibly infinitely many, disjunctive forms. In an earlier work, Evans and Gould established stability theorems wheng is a continuous finite-dimensional real-vector function andJ=1. It is pointed out that the results of this paper reduce to the Evans-Gould results under their assumptions. Furthermore, since we use a slightly more general definition of lower and upper semicontinuous point-to-set mappings, we can dispense with the continuity ofg (except in a few instances where it is implied by convexity assumptions).     

Closed paths of light trapped in a closed Fermat curve

Geometric constructions have previously been shown that can be interpreted as rays of light trapped either in polygons or in conics, by successive reflections. The same question, trapping light in closed Fermat curves, is addressed here. Numerical methods are used to study the behaviour of the reflection points of a triangle when the degree of the curve varies, including a generalization to non integer powers.     

‘New mathematics’ and teaching

Inside the scientific world it is not always understood that the mood of mathematics, which is a product and a part of culture, can change with time. This is partly why many have been surprised by the coming of the so‐called new mathematics.

In the truly creative mathematical mind two opposite tendencies coexist: the logical and the imaginative. Apparently it seems that new mathematics can be reduced to a purely logical machinery. In fact it contains as much imaginative contributions as classical mathematics. But it is difficult to show simultaneously the logical sequence of propositions and the clumsy progression of research itself. Mathematical exposition does not always follow the ‘ most natural slopes’ of the mind. Unfamiliar presentations often give an impression of ‘ abstraction ‘, more familiar ones an impression of concreteness ‘.

So it appears that difficulties with new mathematics are mostly of psychological origin. Misuses of it can easily raise up intolerance reactions and emotional blocks. Perhaps insisting upon the fact that, here as elsewhere, it is important to be able to guess, to realize that intuition and imagination are essential, could help to make new mathematics better understood, more useful and more able to be considered as a unifing element among sciences.     

杰出人物论微积分

摘编14位杰出人物对微积分的精辟论述。     

A calibrated model of local food system of Hawaii: What are the economic implications of the state's food goals and policies?

We develop a fully calibrated positive mathematical programming model for Hawaii's local food systems—which captures the production and the consumer sides of the market. Then we use the model to assess two proposed policies—a general excise tax (GET) exemption on locally produced foods, and an investment in agricultural infrastructure. For the GET exemption case, our results indicate an economic gain of $118 per $100 cost. On the other hand, an investment in 1,200 acres of land injected to support local production may generate an economic gain of up to $357 per $100 annual cost of the investment. However, these estimates should be considered preliminary, and thus viewed with caution. Although the model is used to capture Hawaii's local food systems, we believe that our model is generalizable and can be adopted by other economies to assess their respective food localization policies. Recommendations for Resource Managers

• Local food policies need to be based on quantitative terms instead of mere armchair speculation because often their potential outcomes may vary significantly.

• The current modeling framework demonstrates the potential of using positive mathematical programming (PMP) in capturing the intricacies of local food systems. However, this exploratory exercise should be viewed as preliminary in nature and the ensuing results were taken with caution because many important factors such as labor availability may have been left out.

• Thus, further model refinements are necessary to better capture the complexities of local food systems such as farm heterogeneity, availability of farm labor, water availability, and interisland transportation of farm products in the case of Hawaii.

     

政府奖励对报废汽车回收模式选择的作用机制研究——基于企业社会责任视角

随着我国报废汽车数量的增多,由其造成的交通隐患、环境污染和资源浪费已成为重要社会问题,而如何设计合理可行的回收模式成为解决问题的关键。以制造商主导为前提,提出了基于企业社会责任的报废汽车回收模型,构建了制造商回收、销售商回收和第三方回收模式下的回收流程和数学模型,通过实例对考虑和不考虑企业社会责任两种情况下的回收模型进行了分析,探讨了不同政府奖励下报废汽车回收模式的策略选择。通过研究发现:(1)不论是否考虑企业社会责任,随着政府奖励的增加,制造商最终都会选择由自己进行回收;(2)当考虑企业社会责任时,政府奖励和决策者经济责任偏好都会导致决策的改变,随着政府奖励和赋予经济责任权重的同步增加,制造商的决策由第三方企业回收模式或销售商回收模式变成了制造商回收模式,表明政府奖励和企业社会责任对报废汽车回收模式选择具有显著影响。     

An Improved Model for Polyether Production from 1,3‐Propanediol

A dynamic mathematical model is developed for production of Cerenol polyether from 1,3‐propanediol in a batch reactor system. The model accounts for polycondensation reactions and side reactions in the liquid phase and for mass transfer of volatile species to the vapor. Parameters are estimated using measured liquid‐phase concentrations of monomer, oligomers, water, and end groups as well as the mass and composition of condensate collected from the overhead condenser system. The proposed model uses novel probability factors to keep the model equations relatively simple while accounting for the complex influence of superacid catalyst on reaction rates. The model is a significant advance over previous Cerenol models because it better accounts for mass‐transfer rates and for the dynamic behavior of the condenser. In addition, the proposed model accounts for the inhibitory influence of water on polycondensation kinetics due to hydration of hydroxyl ends. The model equations and parameter estimates provide a substantial improvement in fit to the data, especially for long reaction times and high catalyst levels, resulting in a 97% reduction in the value of the weighted least squared objective function compared to equations and parameters from a previous model.     

Mechanical effects of acupuncture

Acupuncture, a physiotherapy, has been widely accepted all around the world. This study focuses on the influence of membrane structures and explains the acupuncture sensations from the aspect of mechanical properties. By mathematical modeling and numerical simulation, the scientific meaning of the acupuncture depth is investigated and phenomena and theory of acupuncture are discussed. The simulation results show that (a) the fascial structure is the main contributor to the force on the needle, the axial force will gradually increase before piercing the fascial, and suddenly decrease after piercing the fascial; (b) there is an inverse relationship between the needle radius and the maximum radial stress, which indicates that the needle should not be too sharp to cause local stress concentration and piece the fascia layer; and (c) the simulation results of comprehensively considering the static friction and sliding friction is identical with the experiment results. This study proposes a preliminary study of mechanical effects of acupuncture manipulation, clarifies key factors affecting the stress on the needle, and explains the objective requirement of acupuncture depth to effective treatment.     

平均值不等式的证明及其应用

n n n设 a1，a2，…，an为正数，若∏i＝1 ai ＝1或∑i＝1 ai ＝1，借助数学归纳法可相应地证明∑ai ≥ n或i＝1 n nn∏ai ≤1．这两个不等式可用于证明平均值不等式，并由此得出三者相互等价．实例说明平均值不等式在求数列极限方面的应用． i＝1