饲喂频率对鲈鱼生长及体生化成分的影响

选取同一种饵料设置1次·d-1、2次·d-1、3次·d-1、4次·d-14个饲喂频率,采用静水连续充气养殖系统,在盐度为26.0%～27.0%、温度为26～30℃条件下对鲈鱼(85.95±2.04)g进行为期40d的生长实验.结果表明:(1)饲喂频率影响鲈鱼的生长是由食物转化率和摄食率的提高共同引起的.(2)水分含量随饲喂频率的增高而保持不变;蛋白质含量随饲喂频率的增加,基本保持不变;脂肪含量随饲喂频率的增高而明显减少;灰分含量随饲喂频率的增多而明显增加.(3)鲈鱼的适宜饲喂频率为2次·d-1.     

基于傅立叶变换轮廓术的物面相位提取

采用傅立叶变换轮廓术,针对基频提取的关键技术采用逐行傅立叶变换,准确提取基频信息的方法恢复相位信息.在此基础上,以未畸变条纹为基准,得出被测物体的真实位相值.该方法只需一幅条纹图,节约了测量时间.实验证明可实现无接触面型的自动传感.     

The effect of construction material, contents and room geometry on the sound field in dwellings at low frequencies

An experimentally validated finite element method is used to model the sound level in rooms at low frequencies. It is demonstrated that the dimensions of rectangular rooms strongly influence the sound pressure level difference. Additional factors were investigated which are not normally considered in the frequency range where diffuse sound field conditions can be assumed. Three effects were investigated: room damping due to wall vibrations, furniture, the effect of small deviations from simple rectangular shapes. It is confirmed by field measurements that the vibrations of masonry walls and floors introduce less damping than surfaces of lightweight construction. Assigning to the FE model a damping equivalent to a surface absorption of 0.02 reproduces the effect of walls of heavyweight construction. Damping equivalent to a surface absorption of 0.15 reproduces the effects of plastered timber-frame walls, floors and ceilings. The work was briefly extended to a room pair built with heavyweight and lightweight material of construction. The modification of the shape of the room frequency response highlights well the effect of material of construction. In-situ and laboratory measurements show that furniture has little effect on steady-state room response below 100 Hz. Modelling a wall recess smaller than 0.5 m improved the agreement between prediction and measurements but the assumption of a simple rectangular room remains appropriate.     

FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

光强一定时饱和光电流随入射光频率的变化关系辨析

对光电效应实验中饱和光电流随入射光频率变化关系的几种谬误进行了辨析，给出了光强一定时饱和光电流随入射光频率变化的正确规律并作了解释。     

基于悬臂梁调谐技术的光纤光栅无源振动监测

采用匹配光纤光栅设计了一种结构简单的振动信号无源监测装置.该装置利用悬臂梁调谐技术能够将微小振动信号转化为光电探测器可探测的光强信号,利用示波器实现实时监测.实验中对振幅为3mm的简谐振动信号进行了监测,测量结果与振动频率一致,可测量7～20Hz的振动,信噪比不低于14.9dB.监测频率受限是因为悬臂梁的性质,如采用金属材料或者采用齿轮组对转子进行减速,该装置可探测更高的频率.     

F-H实验仪与光栅光谱仪连用观测253.7nm谱线

通过F-H实验仪和光栅光谱仪的连用，可实时观测汞原子从6s6s1So态激发到6s6sSP1态，退激时，辐射出能量为4．9eV的光量子，其波长为253．7nm．     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

Review of chiral perturbation theory

A review of chiral perturbation theory and recent developments on the comparison of its predictions with experiment is presented. Some interesting topics with scope for further elaboration are touched upon.     

高斯光束计算平板波导自由传输区远场分布及其修正

对近轴近似条件下求解亥姆霍兹方程得到的高斯光束显式传播公式做了分析，同时，基于基尔霍夫衍射理论，在菲涅耳近似的条件下给出了相应的高斯光束在远场的传播公式，在此基础上，对近轴近似条件做出了定量分析，给出了这个近似条件引入的误差，提出了一种计算高斯光束远场分布的修正方法，并采用有限差分-光束传播方法(FD-BPM)来检验各种方法的准确性。把这种修正方法应用到平面光集成波导器件，如阵列波导光栅(AWG)、蚀刻衍射光栅(EDG)等器件的设计和模拟中，可以大大降低工作的复杂性，同时可以得到精确的结果。