价格与质量双重竞争下电商平台渠道模式决策研究

近年来传统电商正加速从经销商转变为连接消费者与供应商的在线市场中间商, 电商平台与供应商形成三种渠道结构:经销商模式、混合模式和在线市场模式。本文通过构建Stackelberg博弈模型讨论产品质量与价格双重竞争情境下电商平台与供应商销售合作模式最新选择问题。研究表明,当价格竞争强度适中而佣金比例较大时,混合模式是电商平台最优选择,此时产品质量差异最大;当价格竞争强度较小而佣金比例较大时,在线市场模式则是最优选择;在其他条件下,经销商模式是其最优选择。本文结论对电商平台与供应商合作模式选择、产品质量与定价决策具有参考价值。     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。     

Event-triggered sliding mode control for switched genetic regulatory networks with persistent dwell time

This paper focus on the event-triggered sliding mode controller design for discrete-time switched genetic regulatory networks (GRNs) with persistent dwell time (PDT) switching. Firstly, the observation error dynamics of switched GRNs with PDT is constructed in the light of event-triggered sliding mode control (SMC) scheme. Next, sufficient conditions are derived to ensure the exponential stability of the augmented plant. Moreover, an event-triggered SMC law is synthesized to impel the system trajectories onto the sliding surface in a finite time. Finally, a verification example is provided to illustrate the effectiveness and potential of the proposed method.     

Laser Raman spectroscopic study of photoreaction dynamics in p -chloro cinnamic acid crystal

Raman phonon spectroscopy has been used to study photodimerization reaction inp-chloro cinnamic acid (pCCA) crystal. The β-form of the crystal yields the 4,4′-dichloro-β-truxinic acid dimer. Six distinct low frequency phonon bands are observed in thepCCA monomer crystal. On reaction progress, these bands show a monotonic shift to lower frequencies and broaden out. Finally, in the dimer crystal the phonon spectrum shows two weak broad bands. These results suggest that the reaction is homogeneous in the initial stages and, as the product concentration increases, the lattice becomes highly disordered. The reactant and the product were characterised by infrared and Raman spectroscopy. The disappearance of aliphatic C=C bond stretching vibration and appearance of cyclobutane ring deformation and cyclobutane ring-breathing vibrations on reaction confirm photodimerization by cyclobutane ring formation. The large Stoke's shift between the absorption and emission band suggest strong exciton-phonon coupling in the monomer lattice. This reaction seems to be phonon-mediated.     

Purification by solid layer melt crystallization

The application of solid layer crystallization techniques in industry is arousing ever more interest. One reason is the increasing demand for ultrapure products, and another is the energysaving potential of this separation technology.This article examines solid layer melt crystallization as concerns its purification efficiency. The crystallization process was carried out in two different modes, whereby the process parameters were varied and post-crystallization treatments were additionally applied. The experimental results were used as the basis for a mathematical fit of a semi-empirical expression which predicts the purification efficiency. It was used for a design of different multistage plants, which operate with different crystallization strategies. One result is that a comparable product quality is attainable with a simple process technique in combination with post-crystallization treatments, instead of a more complicated and therefore more expensive process technique.The authors wish to acknowledge support by the EU (JOULE program), which helped attainment of some results presented here.     

氨基酸衍生物PMV，PML和PMA的电喷雾质谱研究

应用电喷雾（ESI）质谱及其多级串联质谱（MS~n）技术研究了三个氨基酸衍 生物N-(N-亚甲基-2-吡咯烷酮）-缬氨酸（PMV），N，N-二-（N-亚甲基-2-吡咯烷 酮）-亮氨酸（PML）和N，N-二-（N-亚甲基-2-吡咯烷酮）-β-丙氨酸（PMA）在电 喷雾条件下的质谱行为。在此条件下三个氨基酸衍生物PMV，PML和PMA可以质子化 形式PMVH~+，PMLH~+和PMAH~+存在，并且检测到它们的Na~+和K~+的加合物。在电 喷雾条件下PMV，PML和PMA优先采取C-N键的断裂，并且通过分子间的氢键作用形成 了许多二聚和三聚物种。     

The identification of tricyclic neuroleptics and sulphonamides by high-performance thin-layer chromatography

Circular high-performance thin-layer chromatography (HPTLC) has been used to differentiate a series of twelve tricyclic neuroleptics, using both normal phase and reverse phase procedures. The use of normal phase systems also allows the resolution of geometric isomers of chlorprothixene, clopenthixol and flupenthixol. Thirteen sulphonamides and Trirnethoprim may also be distinguished using HPTLC.     

The mean spherical model in a random external field and the replica method

We provide a quick elementary solution of the mean spherical model in a random external field. This also allows an immediate proof of the self-averaging property of the free energy. We calculate the free energy by means of the replica method, i.e., for any (not necessarily integer) replica numbern, and show that when a phase transition occurs the limits andn 0 are not interchangeable.     

Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.