流动注射在线液—液萃取原子吸收光谱法测定生物样品中的铅

本文利用所设计的一种新型流动注射液－液萃取重力分相器，建立了流动注射液溶剂萃取原子吸收光谱法测定铅的新方法，详细地研究了流动注射在线萃取的实验条件及流路系统，方法的精密度和检出限分别为２．５％（ｎ＝１１）和２．８μｇ／Ｌ（ｋ＝３）。用拟定的方法测定了峰蛹，粮食等生物样品中的铅，结果与参考值相吻合。     

Infrared ellipsometry of interdiffusion in thin films of miscible polymers

A new application of infrared ellipsometry is reported. Specifically, the interdiffusion between thin films of miscible polymers—poly(methyl methacrylate) and poly(vinylidene fluoride)—is detected in a non‐invasive measurement. A novel technique of data analysis for interdiffusion was developed and is described. The validity of the approach is supported by simulations of diffusion in a bilayer. The onset of extensive interdiffusion over a time period of 15 min occurs at a temperature of 160 °C. At a temperature of 190 °C, the data show that complete mixing of a bilayer (850 nm thick) occurs within 30 s, which is consistent with previously reported values of the mutual diffusion coefficient. Infrared ellipsometry is non‐invasive, applicable at elevated temperatures and relatively fast and sensitive. Although, in these measurements, it was unable to determine a concentration profile at the interface, infrared ellipsometry was used successfully to detect when interdiffusion had occurred. Hence, it is a useful means for screening polymer pairs for miscibility. Copyright © 2004 John Wiley & Sons, Ltd.     

A new apparatus for the extraction of organic compounds from aqueous solutions

A new apparatus for the extraction of organic compounds from sea water is described. With this apparatus it is possible to extract 54 standard compounds with high recovery percentages from 9 1 of sea water with 3 ml ofn-hexane. The analysis time (about 1 h) is appreciably lower than those of the extraction methods based on RP-18 and Carbopack-B adsorption (about 15 h). Furthermore, it is possible to analyze samples without filtration. An application of this method to the analysis of Tirreno sea water is reported.     

Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998     

Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Grain boundary segregation diagrams of α-iron

Based on thermodynamic analysis of interfacial segregation, the segregation enthalpy H ^o of a solute I in a given matrix was found to depend linearly on two mutually independent terms reflecting the type of interface and the solid solubility limit X _infI ^sup* at temperature T and can be written as In this equation, the structural dependence of interfacial segregation is contained in H ^*() which corresponds to the extrapolated segregation enthalpy of a solute with unlimited solubility in the matrix. The product [Tln(X _infI ^sup* )] is essentially constant with temperature, and can therefore be obtained from data for maximum solid solubility, [Tln(X _infI ^sup* )]_max. The parameter v>0 represents the relationship between the activity a _infI ^sup* of a solute at the bulk solid solubility limit in a given matrix and X _infI ^sup* , a _infI ^sup* =(X _infI ^sup* ) ^v , and is characteristic for the matrix. Using recent experimental data for silicon, phosphorus, and carbon segregation at well-characterized grain boundaries in oriented bicrystals of -iron, the averaged value was determined. Values of H ^*() range from -8 kJ/mol (general grain boundaries) up to +8 kJ/mol (special grain boundaries). These values are discussed and used for a more precise and generalized construction of grain boundary segregation diagrams of -iron.     

人尿中异黄酮的高效液相色谱分析

建立了测定人尿中异黄酮组分(大豆苷原、黄豆黄素、雌马酚、染料木黄酮)含量的反相高效液相色谱法。在尿样中加入黄酮作为内标,异黄酮经酶解后在pH=7.0中性条件下用乙酸乙酯(1∶1)提取,然后用0.02%TFA-M eOH-ACN三元梯度洗脱的方法分离异黄酮。在该条件下,大豆苷原、黄豆黄素、雌马酚、染料木黄酮的检出限分别为12.9 nmol/L、13.9 nmol/L、71.6 nmol/L和11.8 nmol/L;回收率均在89%以上。本方法具有测试步骤简单、准确度高、重现性好等优点,适合大批量样品测定。     

Spreading of viscous droplets on a non viscous liquid

Some polymer melts (of high viscosity ) can wet completely the surface of a non miscible, simple liquid. We discuss here the laws of spreading for a macroscopic droplet of this type, when the internal friction of the droplet dominates. We predict a droplet radius increasing liket ^1/4 wheret is the spreading time, or equivalently a droplet curvature decreasing liket ^–1. The droplet should be surrounded by a precursor film, which is not discussed in the present note.     

Surface tension and universality in the three-dimensional Ising model

The amplitude ₀ of the interfacial free energy per unit area (or surface tension) of the body-centered-cubic Ising model is found using a direct monte carlo simulation technique. The combination ²/k_BT_c, where is the correlation length, is shown to agree within the precision of the simulations with a previously reported estimate for the simple cubic lattice. Evidence is also presented for the universality of the finite-size scaling amplitude for the surface tension.