高硅分子筛MCM-41热稳定性与水热稳定性的初步研究

高硅分子筛ＭＣＭ－４１热稳定性与水热稳定性的初步研究董维阳,龙英才,郜晓琴,许太明,谢关根,高滋（复旦大学化学系,上海,２００４３３）关键词高硅分子筛ＭＣＭ－４１,热稳定性,水热稳定性,环己烷吸附等温线ＭＣＭ－４１是最近几年刚刚发现的中孔分子筛（Ｍ４...     

二元溶液吸附方程的研究

本文运用统计热力学方法,在分子作用理论基础上应用均一位势模型与理想势阱模型第一次导出了二元溶液吸附量与溶液组成、分子微观参数之间的关系,并采用文献数据给予验证。结果表明本关系式能如实反映有机酸、醇、苯酚、无机碱在炭、硅胶表面的吸附特性,并精确地计算了骨炭、水、醋酸体系中醋酸的吸附量。此公式采取不同数值的参数能描绘出Ⅰ、Ⅱ、Ⅲ三种类型的吸附等温线。本文运用统计热力学方法不但较深入地研究了发生在液－固界面的吸附现象,而且为液相色谱热力学奠定了理论基础。     

Growth kinetics of ammonium oxalate monohydrate single crystals from aqueous solutions containing Co(II) and Ni(II) impurities

The growth kinetics of different faces of ammonium oxalate monohydrate (AO) single crystals from aqueous solutions containing different concentrations of Co(II) and Ni(II) ions at a constant temperature are described and discussed. It was found that: (1) at a given supersaturation σ, both Co(II) and Ni(II) ions lead to a decrease in the growth rates R of different faces of AO crystals, (2) the growth of a particular face of the crystals occurs above a critical supersaturation σ_d, but there is also another supersaturation barrier σ* when the rate abruptly increases with σ, and (3) the values of σ_d and σ* increase with increasing concentration c_i of the impurity. The experimental R(σ) data for different concentrations c_i of the impurities were analysed according to the model involving complex source of cooperating screw dislocations and concepts of instantaneous and time‐dependent impurity adsorption. Analysis of the data showed that: (1) adsorption of Co(II) and Ni(II) impurities occurs on the surface terrace of AO crystals, (2) there is a simple relationship between Langmuir constant K and the impurity concentration c_i* corresponding to maximum surface coverage, and (3) the ratio σ_d/σ* of the supersaturation barriers observed in the presence of both impurities increases with an increase in impurity concentration c_i, and may be explained from the standpoint of the mechanism of adsorption of impurity particles at kinks and ledges. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

苯胺在碳纳米管上的吸附特征

苯胺是一种重要的有机化工原料,能通过皮肤和呼吸道进入人体而引起中毒,还会严重污染环境。目前,国内外处理含苯胺废水的方法主要有氧化法、萃取法、生化法、吸附法等。本文使用碳纳米管进行液相吸附除去苯胺。     

Effect of Mn(II) ions on the growth of ammonium oxalate monohydrate crystals from aqueous solutions: II. Growth kinetics

The experimental results of the effect of concentration of Mn(II) ions on the growth kinetics of different faces of ammonium oxalate monohydrate single crystals from aqueous solutions at a constant temperature and different predefined supersaturations are described and discussed. It was observed that: (1) at a given supersaturation σ, Mn(II) ions lead to a decrease in the growth rates of different faces of AO crystals, (2) the growth of a particular face of the crystals occurs above a critical supersaturation σ_d but there is also another supersaturation barrier σ* when the rate abruptly increases with σ, (3) the values of σ_d and σ* increase with increasing concentration of the impurity, and (4) the values of σ_d depend on the growth kinetics of a face but those of σ* are independent of face growth kinetics. The experimental R(σ) data for different Mn(II) concentrations c_i were analysed according to the model involving complex source of cooperating screw dislocations and concepts of instantaneous and time‐dependent impurity adsorption. It was found that: (1) for a given face the differential heat of adsorption Q_diff is higher during instantaneous impurity adsorption than that during time‐dependent adsorption, and (2) the values of Q_diff involved during instantaneous adsorption are related with face growth kinetics but those during time‐dependent adsorption are independent of face growth kinetics.     

The Characteristics of the Mixed Crystals of the KNO3‐NH4NO3‐H2O System at 298 K

The equilibrium studies of the KNO₃‐NH₄NO₃‐H₂O system at 298 K have been conducted. The isotherm of solubility and the curve of distribution have been mathematically described. The parameters of the crystal lattice and the enthalpy of crystallization of the [K_x(NH₄)_1‐x]NO₃ solid solutions as a function of their composition have been presented. The structure of salts KNO₃�xNH₄NO₃ with different x values have been solved and refined.     

氢在A、X及ZSM-5型沸石上的高压物理吸附

The hydrogen adsorption properties and uptake capacities of the A, X and ZSM-5 types of zeolites were investigated at temperatures of 77, 195 and 293 K and pressures up to 7MPa, using a conventional volumetric adsorption apparatus. All hydrogen adsorption isotherms were basically type I, but the maximum in isotherm,a unique feature of supercritical adsorption, was observed at high pressures of 2-5 MPa at 77 K. The isosteric heats of adsorption were determined from the isotherms and the factors that influence their variations were discussed. Different types of zeolites exhibited remarkably different hydrogen uptake, based on both the framework structure and the nature of the cations present. The highest gravimetric storage capacity of 2.55wt% was obtained for NaX-type zeolite at 4 MPa and 77 K. In CaA, NaX and ZSM-5 types of zeolites,hydrogen uptakes were proportional to the specific surface areas, which were associated with the available void volumes of the zeolites. A threshold in hydrogen adsorption observed in NaA and KA was attributed to a pore blocking effect by large cations in KA. A ratio of the kinetic diameter of adsorbate to the effective opening diameter of zeolite was used to judge the blocking effect for physisorption.     

Multicomponent isotherm modeling of hexavalent chromium and fluoride ions simultaneous removal using rice husk derived activated carbon (RHDAC) electrode

In the present work RHDAC electrode was used to electrosorption of hexavalent chromium and fluoride (HCAF) by capacitive deionization from the aqueous feed. In this study multicomponent isotherm (MCI) modeling were done with different six MCI models for simultaneous removal of HCAF using RHDAC electrodes. This RHDAC electrode performance was indicated the simultaneous maximum electrosorption 2.47 and 2.34 mg/g for HCAF respectively for 100 mg/L aqueous feed. The results show that MCIM3 (Extended Langmuir) and MCIM5 (Non modified Redlich Peterson) models were found more fit to with experimental data with lower MPSD for both HCAF than other MCI models. The RHDAC was an effective electrode material for HCAF sorption from low concentrated feed.     

Evaluation of tetracycline removal by magnetic metal organic framework from aqueous solutions: Adsorption isotherm,kinetics, thermodynamics,and Box-Behnken design optimization

In our current research, an intriguing magnetic nano sorbent Fe₃O₄@Zr-MOF was synthesized in the lab. We used this adsorbent for successfully removing tetracycline (TC) from water. We performed a number of experiments and studies to further support this, including the following: vibrating sample magnetometer (VSM), Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller surface area (BET). Our studies have determined that the Fe₃O₄@Zr-MOF boasts a considerable surface area of 868 m²/g with the highest adsorption capacity (q_max) of 942.12 mg/g. Study the factors that effect on adsorption process such as pH, TC concentration, adsorbent dose, and temperature. The adsorption isotherm was fitted to the Langmuir equation, whereas the kinetic isotherm to the pseudo-second-order equation. The adsorption process was chemisorption as well as the adsorption energy was 20 kJ/mol. Adsorption thermodynamics indicated that the adsorption process was both endothermic and spontaneous. As temperatures increased, the amounts of materials absorbed also increased. The Fe₃O₄@Zr-MOF has magnetic properties as it easily to remove from the solution after adsorption process. The adsorbent was used for five cycles with high efficiency and without change in the chemical composition as well as the XRD was the same before and after reusability. The mechanism of the interaction between Fe₃O₄@Zr-MOF and TC was expected on: Electrostatic interaction, π-π interaction, hydrogen bonding, and pore filling. The adsorption results were optimized using Box Behnken-design (BBD).