光谱偏振调制器的高精度装调方法

为了提高光谱偏振调制器的探测精度,提出了光谱偏振调制器的高精度装调方法。首先,分析了光谱偏振调制器的调制原理,提出了采用三片多级相位延迟器加线偏振器的装调方案;然后,建立了调制器装调的数理模型,设计了校准多级相位延迟器的厚度;最后,对成像过程进行了计算机仿真实验验证,并模拟了成像系统的装调过程。结果表明:利用该方法能够灵敏检测偏振器件间的微小相对旋转角度误差,可实现调制器的高精度装调,在输入本文设定的校准光谱条件下,绝对精度可达0.2°。该方法保留了传统光谱调制器充分利用通道带宽的优势,保证了复原光谱的分辨率,为强度调制型光谱偏振成像系统的精密装调提供了一定的理论参考。     

A fusion algorithm for infrared and visible images based on RDU-PCNN and ICA-bases in NSST domain

The aim of infrared and visible image fusion is to enhance the feature in infrared image and preserve abundant detail information in visible image. Based on the fact that the human sense system accepts external stimulation only when the stimulus intensity is greater than a certain value and the reaction of neuronal cells have obvious regional characters, an image fusion algorithm based on region dual-channel unit-linking pulse coupled neural networks (RDU-PCNN) and independent component analysis (ICA) bases in non-subsampled shearlet transform (NSST) domain for infrared and visible images is proposed. RDU-PCNN we constructed has obvious regional characters and much lower computational costs. We trained ICA-bases using a number of images that the content and statistical properties are similar with the fusion images but applied it as low-frequency ICA-bases, which can reduce calculation complexity. Experimental results demonstrate that the proposed method can significantly improved the fusion quality and need less computational costs.     

基于荧光强度比值法可用于现场测量的低成本聚合物光纤温度传感器

基于荧光强度比值法,设计了一种使用两种荧光染料的光纤温度传感器.实验中,罗丹明B和罗丹明110分别为对温度敏感和对温度不敏感的荧光传感物质,利用聚合物光纤来传导激发光及接收荧光.由于两种染料的荧光谱峰相距60 nm,因此容易将二者对应的荧光谱分开.通过确定能代表两种染料的最优荧光光谱范围,获得具有良好线性度的温度-荧光强度标定曲线.实验研究了不同浓度的荧光染料对标定曲线的影响,当染料浓度为0.3 g/L时,可获得0.28℃的最小均方误差及0.0128/℃的灵敏度.此外,该传感器还具备一定的抗光源扰动和抗荧光染料漂白的能力.     

气相色谱-质谱联用结合化学计量学方法分析光照对鱼腥草挥发性成分的影响

采用色谱-质谱联用技术结合化学计量学方法对不同光照生长条件的鱼腥草挥发性成分进行分析。水蒸气蒸馏法提取鱼腥草挥发油,气相色谱-质谱进行分析。色谱指纹图谱结合主成分分析与相似度评价以探究不同光照挥发油成分的异同。直观推导式演进特征投影法(Heuristic evolving latent projections,HELP)分辨重叠色谱峰,NIST标准质谱库结合相关文献进行定性,峰面积归一化法定量,t-检验比较不同光照组成分含量间是否有显著性差异。3种光照下的鱼腥草挥发油指纹图谱存在一定的共性和差异,共鉴定出33种化合物,共有化合物26种。随着光照强度的减少,单萜类化合物含量减少,非萜类含量增多,倍半萜类变化不大。癸酰乙醛和甲基正壬酮在全光照组的含量明显低于遮光组的含量。研究结果表明,适度的遮光有利于鱼腥草挥发性有效成分含量的提高,鱼腥草药材挥发性成分种类及含量与生长条件密切相关。     

Frequencies and absorption intensities of the fundamental and the first overtone of NH stretching vibrations of pyrroleacetylene and pyrroleethylene complexes studied by density-functional-theory calculation

The structures of pyrroleacetylene and pyrroleethylene complexes which form an NH–π hydrogen bonding were calculated by density-functional-theory calculation. The wavenumbers and absorption intensities of the fundamental and the first overtone of NH stretching of the complexes were investigated to compare effects of the hydrogen bonding on the fundamental and the first overtone of the NH stretching mode. One-dimensional Schrödinger equation in consideration of molecular vibrational anharmonicity was used for the estimation of the wavenumbers and absorption intensities of NH stretching modes of the complexes; it was found that the NH–π hydrogen-bond formation induced lower wavenumber shift for both the fundamentals and first-overtones of NH stretching mode and it increases absorption intensities of the fundamentals and decreases those of first overtones of NH stretching mode.     

Relative intensity noise induced by four-wave mixing in the case of two-wave transmission in an optical fiber

Four-wave mixing (FWM) is a significant nonlinear effect in wavelength division multiplexing (WDM) fiber-optic systems. For two-wave transmission, it is easily found that the FWM noise power decreases with frequency spacing and increases with signal power. However, the variation of relative intensity noise (RIN) with frequency spacing and signal power is only 2 dB at most. The intensity fluctuations induced by the energy exchange between the FWM generated new waves and the original ones are trivial and the influence of FWM on RIN can be neglected. It is also found that the increase of RIN with signal power is mainly attributed to stimulated Brillouin scattering (SBS) rather than FWM.     

Separable convolution template (SCT) background prediction accelerated by CUDA for infrared small target detection

This paper presents a novel background prediction method for infrared small target detection (ISTD). Using a separable convolution template (SCT) to accelerate the traditional background prediction by graphic processing unit (GPU), the new method provides a significant improvement in the prediction speed, which enables the prediction process in real time. And experimental results show its high efficiency and practical application over previous work. The mathematical approach proposed here could be extended to accelerate the applications referred to image convolutions not only to the infrared field.     

First Experience in Using Microdensitometer “Scandig 3” — Joyce Loebl for Autoradiographs Evaluation

The Device is composed of the basic microdensitometer, the control computer, the magnetic tape unit, the teletype, the interface, and the software package.

This apparatus is designated for digitalization of image data point by point (system “flying spot”) and for their record on magnetic tape for further data processing. The software package makes possible to realize some basic evaluation only by using configuration mentioned above — for example recording of measured values, determination of numbers of occurrences particular optical density (histogram), tresholding and mapping of measured values.

This paper describes the instrument and its using for autoradiographs evaluating.     

Principal component analysis of the main factors of line intensity enhancements observed in oscillating direct current plasma

Enhancement of emission line intensities by induced oscillations of direct current (DC) arc plasma with continuous aerosol sample supply was investigated using multivariate statistics. Principal component analysis (PCA) was employed to evaluate enhancements of 34 atomic spectral lines belonging to 33 elements and 35 ionic spectral lines belonging to 23 elements. Correlation and classification of the elements were done not only by a single property such as the first ionization energy, but also by considering other relevant parameters. Special attention was paid to the influence of the oxide bond strength in an attempt to clarify/predict the enhancement effect. Energies of vaporization, atomization, and excitation were also considered in the analysis. In the case of atomic lines, the best correlation between the enhancements and first ionization energies was obtained as a negative correlation, with weak consistency in grouping of elements in score plots. Conversely, in the case of ionic lines, the best correlation of the enhancements with the sum of the first ionization energies and oxide bond energies was obtained as a positive correlation, with four distinctive groups of elements. The role of the gas-phase atom-oxide bond energy in the entire enhancement effect is underlined.     

收缩喷嘴中的湍流Ⅰ——边界层解

应用边界层积分法,研究锥形喷嘴入口区域中湍动涡流的发展.球面坐标系中的控制方程,通过边界层的假定得到简化,并对边界层进行了积分.应用4阶Adams预测校正法求解该微分方程组.入口区域的切向和轴向速度,分别应用自由涡流和均匀速度分布来表示.由于缺乏收缩喷嘴中涡流的实验数据,需要用数值模拟对该发展模式进行逆向验证.数值模拟的结果证明,该解析模型在预测边界层参数中的能力,例如边界层的生长、剪切率和边界层厚度,以及不同锥度角时的涡流强度衰减率等.为所提出的方法引进一个简明而有效的程序,用以研究几何形状收缩设备内的边界层参数.