热脱附/冷阱聚焦/气相色谱/质谱法卷烟香气分析

利用热脱附装置(TDS)对烟丝粉末进行快速升温,模拟卷烟燃吸过程中蒸馏区的部分反应,用冷阱收集所脱附的物质,以GC/MS对进行定性分析.成功的分离出了有机酸、饱和烃、芳香烃、烯烃以及含氮、氧杂原子的化合物等系列超过100种有机化合物,并且还发现了典型的存在于环境中的化学污染物——邻苯二甲酸二丁酯.     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

On-line photo-derivatization with flow injection and liquid chromatography-atmospheric pressure electrospray mass spectrometry for the identification of indoles

The application of on-line photochemistry with flow injection (FI) and liquid chromatography (LC) in conjunction with atmospheric pressure electrospray mass spectrometry (LC-APESI-MS) for the identification of similar indole derivatives is reported here. The photo-transformation of the indole compounds is strongly affected by the substituent groups on the aromatic and heterocyclic rings. Upon photolysis for 2.5 min, the mass spectrum of tryptamine (Try) which has no OH substituent on the aromatic ring does not differ greatly from that obtained without photolysis. However, after photolysis of serotonin (Ser) which has one OH group on C5 of the aromatic ring, the mass spectrum indicates the formation of dimers and higher molecular weight ions. The fragmentation pattern of 5-hydroxytryptophol (Phol) without photolysis resembles that of Ser with a base peak of m/z 160. Upon photolysis using MeOH-H₂O (10/90), Phol is found to form a base peak at m/z 375 (100%) and a major peak at m/z 214 (66%) in addition to other ions with lower abundance. Melatonin (Mel) and tryptophan (Phan) upon photolysis are found to form high molecular weight ions with a relative low abundance. The mass spectrum of indole-3-acetic acid (Inaa) with on-line photolysis also shows different ions that are not formed without photolysis.     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.     

Simultaneous distillation-extraction and dynamic headspace methods in the gas chromatographic analysis of Parmesan cheese volatiles

Summary Dynamic headspace and simultaneous steam distillation-extraction techniques were used to isolate volatile components of Parmesan cheese. Identification of the substances was carried out by GC and GC-MS; 110 compounds were identified in the samples obtained using the headspace technique, 105 in the extracts; among them, about 50 compounds were isolated with both procedures. Mass spectral data showed evidence for a number of newly reported compounds such as 3-(methylthio)propanal, -tetradecalactone, 9-tetra-decenoic and 9-hexadecenoic acids. Mass spectra of some compounds are discussed and a comparison between the results obtained with the two sampling methods is given.     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.     

Flow injection analysis of potassium using an all-solid-state potassium-selective electrode as a detector

The concentration of potassium was determined by a combination of flow injection analysis (FIA) with an all-solid-state potassium sensor detection. The all-solid-state potassium-selective electrode possessing long-term potential stability was fabricated by coating an electroactive polypyrrole/poly(4-styrenesulfonate) film electrode with a plasticized poly(vinyl chloride) membrane containing valinomycin. The simple FIA system developed in this laboratory demonstrated sensitivity identical to that in the batch system and achieved considerably rapid assay (150 samples h⁻¹). Analyses of soy sauce and control serum samples by this FIA system yielded results in good agreement with those obtained by conventional measurements.     

Flow injection manifolds for liquid-liquid extraction without phase separation assisted by ultrasound

Flow injection (FI) manifolds based on iterative change of the flow direction have been designed to study the influence of auxiliary energy on continuous liquid-liquid extraction without phase separation and compare it with the non-assisted process in a single experiment. In order to demonstrate the utility of ultrasounds as auxiliary energy for the extraction of polyphenols from an organic phase, the approach has been applied to samples of extra virgin olive oil, using an alkaline aqueous phase as extractant and subsequent derivatization with the Folin-Ciocalteu reagent. The proposed method provides results similar to those from the official method-recoveries between 97 and 100%. The sensitivity of the proposed method is 3.5 times higher than that of the non-ultrasound-assisted method. The precision, expressed as relative standard deviation (R.S.D.) for n=5, was within 1-5% and the relative errors for the irradiated and non-irradiated method were within 3 and 5%, respectively. The repeatability and within-laboratory reproducibility, studied at two concentration levels (379 and 813 μg ml⁻¹) ranged between 0.7-4.4% and 0.6-4.8%, respectively. The proposed manifolds can also be applied to either other type of auxiliary energies—microwave, thermal—or two different types of auxiliary energies at the same time.     

Determination of trace elements in human serum by inductively coupled plasma atomic emission spectrometry with flow injection

An analytical method for the simultaneous determination of some trace elements (Au, Fe, Mg, Li, Sr, Zn) in human serum by inductively coupled plasma atomic emission spectrometry (ICP-AES) with flow injection is described. Physical interference caused by the change of sample viscosity is discussed. When 100 μl of serum was injected, the relevant recoveries of > 99% for Li, > 98% for Cu and Mg, > 95% for Fe were obtained for an NIST SRM with R.S.D. > 1.3% using optimized flow injection parameters. The prepared lyophilized control serum for routine analysis in clinical laboratories was analyzed and verified for the validity of the technique employed in this experiment using NIST SRM 909 as a primary reference material.