取样管型流分相式气液两相流体流量计

提出了用取样管来组成一种分流分相式气液两相流体流量计,通过取样管从被测两相流中成比例地分流出一部分气液混合物,然后应用-小型分离器将其分离成单相气体和液体,并用单相流量计分别测量它们的流量,最后根据测量值计算被测两相流体的各相总流量.文中给出了这种两相流体流量计的组成原理,分流系数特性及实验结果.研究结果表明,取样管的端口形状对分流系数的特性影响较大,其中S型端口的效果较理想,能够在较宽的测量范围内保持分流系数的稳定.     

对可压缩流体若干问题的讨论

根据气体幼力学中一维定常等熵等流的基本方程组,得出的一维定常等熵管流的速度变化与管截面变化关系式,定性一讨论了一维定常等熵管流的截面变化对气流速度的影响。     

Functional Analysis of Tube Chain Conveyors

This paper describes some of the aspects necessary for the design and use of tube chain conveyors. It is based on the reports of experienced experts and recent tube chain conveyor experimental results. The aim of the research work is the formulation of general technical regulations for tube chain conveyors. Theoretical models were developed, which allow the calculation of the motion resistances in all parts of the conveyor by the use of empirical extracted correction factors. Specially designed measurement equipment enabled the measurement of the important chain tractive force from the closed tube system. The measurements show the influence of the major operational parameters and the bulk solid properties.     

Walker Bleakney and the development of the shock tube at Princeton

Recollections of activities in the Physics Department of Princeton University leading to the construction and use of the SHOCK TUBE are recorded. Walker Bleakney was the leader of these activities from 1940 to 1979, and his methods and attitude are described. Original interferograms made at Princeton show some results obtained.     

用来激励高频超声换能器的电激励源

讨论了超声换能器的几种激励方法，分析了三种常用激励方法在激励高频超声换能器时的特点及其同局限性，我们雪崩ＭＡＲＸ电路制作的单极窄脉冲能地激励率高达１００ＭＨｚ的换能器并取得了较好的结果。     

注入离子漂移管技术测量原子团簇结构

团簇结构测量是团簇科学研究中的一个重要课题。文章对近几年发展的注入离子漂移管技术进行了详细介绍与分析，该技术是上前测量团簇结构近似程度最高的技术，已在Ｃ，Ｓｉ，Ｇｅ及Ａｌ等原子团簇的结构研究中获得广泛应用，并取得了许多重要结果。     

Optimal electric fields for different sample shapes in high resolution NMR spectroscopy

For many applications, reducing sample resistance, rather than increasing probe Q or filling factor, is the only way to further improve the signal-to-noise ratio of cryogenically cooled NMR probes. In this paper, bounds are calculated for the minimum sample resistance that can be achieved for various sample geometries. The sample resistance of 100 mM NaCl in H(2)O in 5 mm sample tubes was measured on a 600 MHz cold probe to be within 14% of the optimum value. The minimum sample resistance can however be lowered by altering the tube cross section. Rectangular tubes oriented with the long axis along the RF magnetic field are particularly favourable.     

Variable temperature system using vortex tube cooling and fiber optic temperature measurement for low temperature magic angle spinning NMR

We describe the construction and operation of a variable temperature (VT) system for a high field fast magic angle spinning (MAS) probe. The probe is used in NMR investigations of biological macromolecules, where stable setting and continuous measurement of the temperature over periods of several days are required in order to prevent sample overheating and degradation. The VT system described is used at and below room temperature. A vortex tube is used to provide cooling in the temperature range of -20 to 20 degrees C, while a liquid nitrogen-cooled heat exchanger is used below -20 degrees C. Using this arrangement, the lowest temperature that is practically achievable is -140 degrees C. Measurement of the air temperature near the spinning rotor is accomplished using a fiber optic thermometer that utilizes the temperature dependence of the absorption edge of GaAs. The absorption edge of GaAs also has a magnetic field dependence that we have measured and corrected for. This dependence was calibrated at several field strengths using the well-known temperature dependence of the (1)H chemical shift difference of the protons in methanol.     

方形管管阵流固耦合方程中独立参数D的数值解

求解和阵流固耦合方程,必须先求出独立参数Ｄ。本文介绍了一种求解方形截面情况下参数Ｄ的差分方法,首先根据边界条件,得到了求解局部问题的差分模型,在此基础上求出局部函数χ（ｙ１,ｙ２）在流体域内各离散网格点上的值,绘出了局部压力场的等值线图,并由此计算参数Ｄ的值,然后发迹λ值,重复相同的运算,最后绘出Ｄ随λ变化曲线,并和一种渐近解作了比较。结果表明,该数值解法简明、准确。     

光谱法测定室内空气中甲醛浓度

为了对甲醛的浓度进行快速而有效的检测，设计了一套光栅式光谱检测系统。该系统主要包括光学系统、光电信号采集系统和计算机处理系统。系统硬件电路包括前置放大滤波电路、A/D转换电路及单片机的数据采集和发送电路。对酚试剂分光光度法测定空气中甲醛浓度的实验条件进行了研究，分析了影响实验结果的因素，得出了光谱检测实验的实验结果，并对相关结论进行了分析和论证。通过所设计的系统，可直接测出甲醛分析液的透射光光谱，从而得出相应的甲醛浓度。