One-pot synthesis of selenocarbamates from isocyanates and diselenides using the Zn/AlCl3 system

Several N-alkyl/aryl-Se-alkyl/(aryl)selenocarbamates were prepared from various isocyanates and diselenides by reductive cleavage of Se-Se bond with the Zn/AlCl3 system in dry acetonitrile at 80℃.     

纳米CoSe修饰氮掺杂多孔碳的可控制备及其锂硫电池多硫化物的催化转化效应

锂硫电池中较差的循环稳定性和倍率性能是实现锂硫电池商业化的技术障碍,其主要原因之一是多硫化物在硫电极内的电化学转化动力学较为缓慢。为此,我们以ZIF-9为前驱体,采用先碳化,再酸化刻蚀,最后硒化的方法合成了含少量催化剂的CoSe修饰氮掺杂多孔碳(CoSe/NC)电极材料,以期提高硫电极内多硫化物的电化学转化动力学性能,并通过流动液相三电极体系对该材料进行电化学动力学表征。结果显示,相较于对比材料,CoSe/NC能够加快多硫化物的氧化还原反应速率,在 0.2mA·cm^-2电流密度下,多硫化物氧化还原反应在CoSe/NC电极上有最小的反应过电位;同时,在0.1 V过电位下,各氧化还原反应也有最大的响应电流。因此,将 CoSe/NC作为硫宿主材料组装电池展现了优异的电化学性能：在 1C(1C=1 675 mA·g^-1)下初始放电比容量为1 068 mAh·g^-1,经过500次循环后,可逆容量仍保持在693 mAh·g^-1。另外,在3C的高电流密度下,放电比容量可高达819 mAh·g^-1。     

中枢多巴胺系统正电子发射计算机断层扫描显像剂的研究进展

中枢多巴胺系统与多种神经行为障碍的病理生理学有关。一直以来,多巴胺系统正电子发射计算机断层扫描(PET)成像在研究活体大脑中多巴胺生物化学过程上有着重要价值。PET成像的基础是¹¹C、¹⁸F等发射正电子的放射性核素标记的显像剂,这些显像剂通过与多巴胺神经系统不同的靶点特异性结合从而反映多巴胺合成、囊泡储存、突触释放和受体结合以及再摄取过程,推动神经病学、精神病学、药物滥用和成瘾以及药物开发的研究进展。本文综述了以氨基酸脱羧酶、多巴胺转运体、多巴胺受体以及囊泡单胺转运体为靶点的¹¹C、¹⁸F标记的PET显像剂的研究进展。     

基于绿色氢科学理念构筑从低碳制氢到高效储氢的氢能体系

本文从低碳制氢和高效储氢的角度思考及探讨氢能体系绿色化发展过程中的关键科学问题.提出＂绿色氢科学＂理念与＂低碳制氢,高效储氢＂技术发展路线图,以期通过相关科学问题的认识,来构建具有高度原子经济性及可持续性的绿色氢能体系.     

快速气相色谱控制系统的设计与应用

设计了一种用于快速气相色谱(Fast gas chromatography,FGC)的新型控制系统。该控制器主要由色谱柱温度控制系统、自动进样及气路压力控制系统组成。其温度控制范围为30~160℃,升温速度约为3℃/s,温度控制精度为±0.5℃,载气压力控制范围为0~0.5 MPa。将本控制器应用于自制快速色谱,并用色谱对由直链正构烷烃(C1~C8)以及甲苯9种物质组成的标准样品进行测试。结果显示,色谱能在100 s内将此9种物质完全分开。     

Polypeptide/Doxorubicin Hydrochloride Polymersomes Prepared Through Organic Solvent‐free Technique as a Smart Drug Delivery Platform

Rapid and efficient side‐chain functionalization of polypeptide with neighboring carboxylgroups is achieved via the combination of ring‐opening polymerization and subsequent thiol‐yne click chemistry. The spontaneous formation of polymersomes with uniform size is found to occur in aqueous medium via electrostatic interaction between the anionic polypeptide and cationic doxorubicin hydrochloride (DOX·HCl). The polymersomes are taken up by A549 cells via endocytosis, with a slightly lower cytotoxicity compared with free DOX ·HCl. Moreover, the drug‐loaded polymersomes exhibit the enhanced therapeutic efficacy, increase apoptosis in tumor tissues, and reduce systemic toxicity in nude mice bearing A549 lung cancer xenograft, in comparison with free DOX ·HCl.     

An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

Automated,high performance,flow-through chemiluminescence microarray for the multiplexed detection of phycotoxins

A novel multiplexed immunoassay for the analysis of phycotoxins in shellfish samples has been developed. Therefore, a regenerable chemiluminescence (CL) microarray was established which is able to analyze automatically three different phycotoxins (domoic acid (DA), okadaic acid (OA) and saxitoxin (STX)) in parallel on the analysis platform MCR3. As a test format an indirect competitive immunoassay format was applied. These phycotoxins were directly immobilized on an epoxy-activated PEG chip surface. The parallel analysis was enabled by the simultaneous addition of all analytes and specific antibodies on one microarray chip. After the competitive reaction, the CL signal was recorded by a CCD camera. Due to the ability to regenerate the toxin microarray, internal calibrations of phycotoxins in parallel were performed using the same microarray chip, which was suitable for 25 consecutive measurements. For the three target phycotoxins multi-analyte calibration curves were generated. In extracted shellfish matrix, the determined LODs for DA, OA and STX with values of 0.5 ± 0.3 μg L⁻¹, 1.0 ± 0.6 μg L⁻¹, and 0.4 ± 0.2 μg L⁻¹ were slightly lower than in PBS buffer. For determination of toxin recoveries, the observed signal loss in the regeneration was corrected. After applying mathematical corrections spiked shellfish samples were quantified with recoveries for DA, OA, and STX of 86.2%, 102.5%, and 61.6%, respectively, in 20 min. This is the first demonstration of an antibody based phycotoxin microarray.     

Optimization of Chemo‐Enzymatic Epoxidation of Cyclohexene Mediated by Lipases

Abstract

This work describes the lipase‐mediated epoxidation of cyclohexene. Lipases were used to generate peroxyoctanoic acid directly from octanoic acid and hydrogen peroxide and applied in situ to obtain cyclohexene oxide. Various parameters, which could affect this reaction, were studied such as lipases from different sources, organic solvents, temperature and acyl donor concentrations. Highest conversions to cyclohexene epoxide were achieved using a two‐phase system of toluene or xylene/water with ROL (Amano F‐Ap15 free Rhizopus orizae lipase) (84 and 80%) or CALB (Novozymes 435®‐immobilized Candida antarctica lipase type B) (>9 and 84%) as biocatalysts. Using PSL (Amano PS‐free Pseudomonas sp) the conversions were in the range of 12–53%, but an improvement was obtained by the use of the ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate (20 to 41% in water/methyl dichloride).     

FEW: A workflow tool for free energy calculations of ligand binding

In the later stages of drug design projects, accurately predicting relative binding affinities of chemically similar compounds to a biomolecular target is of utmost importance for making decisions based on the ranking of such compounds. So far, the extensive application of binding free energy approaches has been hampered by the complex and time‐consuming setup of such calculations. We introduce the free energy workflow (FEW) tool that facilitates setup and execution of binding free energy calculations with the AMBER suite for multiple ligands. FEW allows performing free energy calculations according to the implicit solvent molecular mechanics (MM‐PB(GB)SA), the linear interaction energy, and the thermodynamic integration approaches. We describe the tool's architecture and functionality and demonstrate in a show case study on Factor Xa inhibitors that the time needed for the preparation and analysis of free energy calculations is considerably reduced with FEW compared to a fully manual procedure. © 2013 Wiley Periodicals, Inc.