基于光纤锥级联结构的湿度传感器

提出了一种基于普通单模光纤粗锥级联结构的马赫-曾德尔干涉湿度传感器.将两根单模光纤对芯熔融成一个粗锥,并依次级联,形成光纤锥-单模光纤-光纤锥-单模光纤-光纤锥结构.外界环境湿度、温度的改变使传感器的纤芯基模和包层模的光程差发生改变,引起传感器干涉光谱发生变化.通过监测干涉谱波长和能量的变化实现对外界物理量的测量.实验结果表明,当空气中湿度在35~95%RH范围内变化时,传感器的湿度灵敏度为-0.065dB/%RH,线性度为0.997;当温度在30~80℃范围内变化时传感器的温度灵敏度为69.4pm/℃,线性度为0.998.该传感器可以避免温湿度的交叉影响,实现单参量的同时在线区分测量.     

The use of balanced homodyne and squeezed states for detecting weak optical signals in a Michelson interferometer

The possibility of using squeezed states and balanced homodyne detection of optical signals in a Michelson interferometer is discussed. The present analysis describes photon statistics measurements effects related to quadrature balanced homodyne detection showing the advantage of using this scheme for detecting weak optical signals.     

Spin-dependent quantum transport through an Aharonov--Bohm structure spin splitter

Using the tight-binding model approximation, this paper investigates theoretically spin-dependent quantum transport through an Aharonov-Bohm （AB） interferometer. An external magnetic field is applied to produce the spinpolarization and spin current. The AB interferometer, acting as a spin splitter, separates the opposite spin polarization current. By adjusting the energy and the direction of the magnetic field, large spin-polarized current can be obtained.     

Laser frequency stabilization based on Sagnac interferometric spectroscopy

A simple method based on Sagnac interferometric spectroscopy (SIS) is applied for frequency stabilization of diode lasers. Sagnac interferometric spectra of rubidium vapor are investigated both theoretically and experimentally. The interference signal at the output of the Sagnac interferometer displays a sharp dispersion feature near the atomic resonance. This dispersion curve is used as the feedback error signal to stabilize the laser frequency. Linewidth of a diode laser is stabilized down to 1 MHz by this modulation-free method.     

Heterodyne interferometer with two spatial-separated polarization beams for nanometrology

An interferometer having accuracy in displacement measurement of <1 nm is necessary in nanometrology. To meet the requirement, the periodic nonlinearity mainly caused by polarization and frequency mixings should be less than deep sub-nanometer. In this paper, two spatial-separated polarization beams are used to avoid mixings and then the periodic nonlinearity. The developed interferometer demonstrates a periodic nonlinearity of about 25 pm and a 2 pm/Hz in displacement noise level.     

Characterization and Spatial Matching of Laser Diode Beams

It is shown that the type of lateral waveguide of a laser diode cannot be determined uniquely based on just the measured magnitude of astigmatism. For a unique determination, the K-factor of Petermann, which characterizes the wavefront curvature at the laser output facet, must be measured as well. In order to determine the type of lateral waveguide, a setup for measuring astigmatic distances in the range 0–200 m with an error of ±2 m and a K-factor with an error of 20% was developed. Operational features of the setup were analyzed, and a technique that allows one to minimize the effect of beam ellipticity on the measurement results was found. Using the technique, the optimization of spatial matching of a laser diode with a ring interferometer of the butterfly type was accomplished. For transformation of the astigmatic elliptical beam into the axially symmetric mode of the interferometer, we have used an optical system that consists of two cylindrical and one spherical lenses. The algorithm for designing the matching system was developed, and the 85% injection of radiation of a AlGaAs laser diode into the principal mode of a ring interferometer was experimentally demonstrated.     

用迈克耳孙干涉仪测量杨氏模量

提出用迈克耳孙干涉仪测金属杨氏模量的新方法,并从实验上测定了碳钢丝的杨氏模量。     

Q band interferometer for high temperature measurements

A Q band interferometer for determining the complex permittivity of solids and liquids between 20°C and 1300°C has been developed. The Roberts and Von Hippel standing-wave method was used. The technique involves the utilization of a computer-assisted digital voltmeter for data acquisition and treatment. Results for a 67SiO₂–33Na₂O within the temperature range 20–400°C and in the liqid state (950°C) are presented.     

Investigations of the E-O behavior in the poled polymer waveguide

The electro-optic (E-O) properties of the slab polymer waveguide induced by electric poling have been studied experimentally. The thin film waveguide was prepared by a synthesized polymer polypelargonamide and poled by applying voltage between the electrodes. I–V curves and E-O characteristics of the polymer films were in-situ measured during poling. In order to evaluate the molecular dipole orientation under the poling field, the absorption spectra of this film was observed by FTIR. The E-O performance of the polymer slab film was also estimated by the Mach–Zehnder interferometer.     

Integrated optical cross strip polarizer concept

Passing across an abrupt junction from a thick vertically bimodal waveguide to a thinner single mode segment, guided light can undergo complete destructive interference, provided that the geometry and the phases of the modes in the initial segment are properly adjusted. We propose to employ this effect to realize a simple polarizer configuration, using a strip that is etched from a planar waveguide. A beam of light is made to pass the strip perpendicularly. The light enters from the single mode waveguide outside the strip into the strip segment, which is configured to support two modes. At the end of the strip, apart from reflections, the amount of power that is guided in the following lower segment depends on the local phases of the two modes. These phases are different for TE and TM light, hence we may expect a polarization dependent power transfer, resulting in polarizer performance for a properly selected geometry. The paper describes in detail the modeling of the device in terms of rigorous mode expansion. Design guidelines and tolerance requirements for geometric and material parameters are discussed. For typical Si₃N₄/SiO₂ materials, our calculations predict a peak performance of 34 dB polarization discrimination and 0.3 dB insertion loss for a device with a total length of about 12 m that selects TE polarization at a wavelength of 1.3 m.