分子自组装成膜技术

分子电子器件是跨学科的前沿领域,分子自组装技术是解决分子电子器件与外界连接的最有效手段之一。文章综述了分子自组装成膜技术的发展概况及其在分子电子器件中的一些应用和最新进展。     

Optical rotatory power of biodegradable polylactic acid films

Polylactic acid (PLA) is a polymer material on which biodegradability research has been the most advanced. PLA is a chiral polymer in which molecules containing asymmetric carbon atoms have a helical structure. Two optical isomers of PLA exist, PLLA (poly(L-lactic acid)) and PDLA (poly(D-lactic acid)). In this study, using various physical processes, we fabricated various samples such as oriented PLLA film, PLLA fiber, rolled PLLA film and forged PLLA plate. We observed a large optical rotatory power ρ in the cylindrical plate fabricated using a forging process. ρ of forged PLLA plates is 7200°/mm which is approximately 300 times larger than that of α-quartz.     

Cationic Xylan Derivatives with High Degree of Functionalization

Xylan from birch wood was characterized regarding both the supramolecular structure (X-ray, CP/MAS ¹³C-NMR) and the sugar composition. The reaction of the birch wood xylan with 2,3-epoxypropyltrimethylammonium chloride in 1,2-dimethoxyethane as slurry medium yields water-soluble, cationic 2-hydroxypropyltrimethylammonium xylan derivatives with high degree of substitution (DS). The DS values up to 1.6 can be controlled by adjusting the molar ratio in a one step synthesis. The structure of the cationic xylan derivatives was confirmed by means of DEPT(135) NMR spectroscopy. Film forming properties of cationic xylan derivatives were investigated with SEM measurements.     

直接酸提取电感耦合等离子体发射光谱法测定煤中主要成灰 …

本文提出了一种全新的以酸直接提取煤中的矿物元素、ＩＣＰ－ＡＥＳ测定其含量的方法。考察了最佳酸配比、酸用量、最佳提取时间、仪器最佳操作参数以及元素间的干扰等诸多因素。与其灰分含量相比,煤中矿物质的提取率在９５％以上,各元素加标回收率为９６％～１０４％,九次测定相对标准偏差小于４％。方法准确、快速、适合于不同煤样中矿物元素的分析测定。     

沉淀和络合反应体系中离子分布的计算方法研究

提出了一种计算方法,定量地计算了沉淀和络合化学反应体系中的金属阳离子和阴离子的分布,考察了影响沉淀和络合物形成的各种因素。基于提出的公式,计算了金、银、铜、镍阳离子和氰根阴离子的沉淀率,理论计算与实验结果一致。     

Modeling biomembranes and red blood cells by coarse-grained particle methods

In this work, the previously developed coarse-grained (CG) particle models for biomembranes and red blood cells (RBCs) are reviewed, and the advantages of the CG particle methods over the continuum and atomistic simulations for modeling biological phenomena are discussed. CG particle models can largely increase the length scale and time scale of atomistic simulations by eliminating the fast degrees of freedom while preserving the mesoscopic structures and properties of the simulated system. Moreover, CG particle models can be used to capture the microstructural alternations in diseased RBCs and simulate the topological changes of biomembranes and RBCs, which are the major challenges to the typical continuum representations of membranes and RBCs. The power and versatility of CG particle methods are demonstrated through simulating the dynamical processes involving significant topological changes, e.g., lipid self-assembly vesicle fusion and membrane budding.     

A generalized anisotropic and asymmetric yield criterion with adjustable complexity

During the past decades, numerous yield criteria for orthotropic materials, possibly showing tension–compression asymmetry, were developed. Although they were applied successfully to forming simulations, they are usually only adequate for a specific class of materials. The aim of this work is to present a generalized, pressure-independent criterion for plane stress states on the base of a two-dimensional Fourier series. Its complexity is adjustable through the number of considered Fourier coefficients, and thus, albeit using an associated flow rule, virtually any number of experimental data can be captured exactly. The criterion is applicable for materials with or without tension–compression asymmetry.     

Finite element modelling of cold drawing for high-precision tubes

Cold tube drawing is a metal forming process that allows manufacturers to produce high-precision tubes. The dimensions of the tube are reduced by pulling it through a conical converging die with or without inner tool. In this study, finite element modelling has been used to give a better understanding of the process.This paper presents a model that predicts the final dimensions of the tube with very high accuracy. It is validated thanks to experimental tests. Moreover, five studies are performed with this model, such as investigating the influence of the die angle on the drawing force or the influence of relative thickness on tube deformation.     

分布反馈式光纤激光水听器拖曳线列阵实验研究

为了进一步增大光纤拖曳阵的探测距离,研制了缆径为16mm的32元分布反馈式光纤激光水听器拖曳线列阵.阵元在10~2 000Hz频率范围内的平均声压灵敏度为-142.7dB(re 1rad/μPa),波动幅度小于±2dB.基于声光调制器的时分、波分联合复用技术实现了32元光纤激光水听器的多路复用,各个阵元之间以及各个通道之间的串扰均小于-40dB,并完成了静态和动态拖曳湖上实验.实验结果表明,研制的32元分布反馈式光纤激光水听器拖曳线列阵无论是在静态,还是在6~16节的动态拖曳状态,都能对目标形成稳定的波束指向,与GPS轨迹记录完全一致,展现了分布反馈式光纤激光水听器拖曳线列阵在工程上的应用前景.     

光谱学研究硅烷钒锆复合钝化膜的结构和成膜机理

在热镀锌钢板表面制备了硅烷钒锆复合钝化膜。用X射线光电子能谱(XPS)、射频辉光放电发射光谱(rf-GD-OES)和傅里叶变换衰减全反射红外光谱(ATR-FTIR)表征了钝化膜的组成结构,分析了硅烷钒锆复合钝化膜的成膜机理。结果表明：硅烷之间互联构成了硅烷钒锆复合钝化膜的主成膜成分,无机缓蚀剂均匀分布在膜层中。钝化膜表面Si2p的XPS窄幅扫描谱100.7 eV处的拟合峰和红外光谱在波数1 100 cm-1 Si—O吸收峰变宽加强,表明硅烷以Si—O—Zn键的形式化学吸附在锌的表面,硅烷分子之间通过Si—O—Si键相互交联;红外光谱中1 650和1 560 cm-1的两个酰胺特征峰,结合910 cm-1的环氧特征峰的消失,表明γ-GPT的环氧基团在氨基活性氢的诱导下开环和γ-APT的氨基之间发生聚合反应形成交联的空间网状结构;rf-GD-OES分析发现钝化膜0.3 μm处存在一层富氧层,钝化反应生成的ZrF₄,ZrO₂和钒盐等无机物均匀分布在钝化膜中。分析膜层组成结构和成膜前后的ATR-FTIR光谱,研究了成膜过程中发生的物理过程和化学变化,提出了硅烷钒锆复合钝化膜的成膜机理。