汽车制造商分时租赁模式采用及产品线策略研究

考虑自有平台和第三方平台两种分时租赁方式,将汽车质量划分为性能质量和环境质量,构建销售模式、纯分时租赁模式和混合模式下的产品线策略模型,研究制造商产品线策略与商业模式之间的相互作用。研究发现,同品牌产品间竞争和合并效应是分时租赁模式影响产品线策略的两个关键因素。同品牌产品间竞争的加剧和合并效应的增大都会激励企业选择性能更好的车型而忽略其环境表现。分时租赁模式能同时改进利润与产品环境表现,但存在条件:当消费者价格敏感性较低时,使用成本高且合并效应小是实现同时改进的条件;当消费者价格敏感较高时,使用成本低且合并效应小则是同时改进的条件。     

修正PRP共轭梯度方法求解无约束最优化问题

基于著名的PRP共轭梯度方法,利用CG_DESCENT共轭梯度方法的结构,本文提出了一种求解大规模无约束最优化问题的修正PRP共轭梯度方法。该方法在每一步迭代中均能够产生一个充分下降的搜索方向,且独立于任何线搜索条件。在标准Wolfe线搜索条件下,证明了修正PRP共轭梯度方法的全局收敛性和线性收敛速度。数值结果展示了修正PRP方法对给定的测试问题是非常有效的。     

第II类双边拆卸线平衡问题建模与优化

报废汽车体积大,废弃物污染大,拆卸过程复杂,将作业任务均衡分配难。为此,本文对工作站数量确定的双边拆卸线平衡问题进行研究,建立问题数学模型,设计一种变邻域蛙跳算法。所提算法在寻优过程中采用变邻域搜索提高族群局部搜索效率;引入个体学习机制加快精英个体进化速度;提出基于二分法的节拍时间调整策略加快对最优节拍的搜索。最后,通过算例对算法性能进行验证并通过实例说明任务在拆卸线上平衡分配的重要性。     

Structure-based identification and clustering of protein families and superfamilies

Summary We describe an approach to protein structure comparison designed to detect distantly related proteins of similar fold, where the procedure must be sufficiently flexible to take into account the elasticity of protein folds without losing specificity. Protein structures are represented as a series of secondary structure elements, where for each element a local environment describes its relations with the elements that surround it. Secondary structures are then aligned by comparing their features and local environments. The procedure is illustrated with searches of a database of 468 protein structures in order to identify proteins of similar topology to porcine pepsin, porphobilinogen deaminase and serum amyloid P-component. In all cases the searches correctly identify protein structures of similar fold as the search proteins. Multiple cross-comparisons of protein structures allow the clustering of proteins of similar fold. This is exemplified with a clustering of /- and -class protein structures. We discuss applications of the comparison and clustering of three-dimensional protein structures to comparative modelling and structure-based protein design.     

关于电子自旋的实验验证和理论思考

本文从斯特恩──盖拉赫实验证实电子具有自旋入手,用电子“自旋──轨道耦合”直观地解释了光谱线精细结构的双重线。     

The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.     

Hole Burning and Fluorescence Spectra of Sol-Gel Derived Sm2+-Doped Glasses

Sm2+-doped glasses in the system of Al2O3-SiO2 were prepared by sol-gel processing of metal alkoxides and reacting with H2 gas at 800°C. The hole burning properties of these glasses were investigated. The holes were burned in the 7F0 5D0 line of the Sm2+ ions using a DCM dye laser at 77 K. The hole depth increased with increasing the laser irradiation time, reaching up to 15% of the total intensity within a few hundred seconds. The hole width was 3 cm–1 full width at half maximum. Fluorescence line narrowing spectra of the 5D0 7 F1 transition were analyzed to study the local structure surrounding the Sm2+ ion. It is concluded that the Sm2+ ions are closely coordinated with nine oxygens of the AlO6 group in aluminosilicate glasses and that the addition of Al3+ ions into glass induces an increase in the coordination number of the Sm2+.     

小型管道pH传感器的研制及其于自动化在线监测中的应用

研制了数种结构简单、实用的小型管道玻璃膜ｐＨ传感器和小型管道ＰＶＣ膜ｐＨ传感器，并将其与普通的酸度计和自动采样器（自制）等合理组合，构成了自动采样酸度在线监测装置，该装置与计算机自动化控制系统联网，已用于稀土萃取分离槽液的酸度自动化在线监测，结果满意。     

聚合物微晶尺寸和晶格畸变

聚合物微晶尺寸和晶格畸变是对聚合物材料性能有着重要影响的结构参数。本文介绍了应用Ｘ射线衍射方法测定聚合物微晶尺寸和结构畸变的几种方法：近似函数、次晶模型法、方差法、矩法。     

微型柱在线分离-ICP-MS法测定高纯氧化铕中的14个稀土杂质

研究了微型柱在线分离-电感耦合等离子质谱法（ICP-MS）测定高纯Eu2O3中痕量Tm的方法，研制了Cyanex272负载树脂微型分离柱，优化了分离Eu2O3基体的实验条件，在线分离测定时间为25min。建立了在线柱分离测定Tm，内标补偿法直接测定其余稀土杂质的高纯Eu2O3中14个稀土杂质的ICP-MS分析方法。方法检出限为0.01μg/g-0.15μg/g，加标回收率为91.5%-110%,相对标准偏差为1.7%-4.9%。可满足快速测定99.999%Eu2O3中14个稀土杂质的要求。