Studies on defect formation in femtosecond laser-irradiated PMMA and PDMS

We report here our results on the spectroscopic and elemental analysis of femtosecond (fs) laser-modified regions in polymers of polymethylmethacrylate (PMMA) and polydimethylsiloxane (PDMS) in the context of defect formation and emission in the visible region. Different physical and chemical models are used to explain the changes in modified regions. We found that the emission intensity, recorded from the fs-modified regions of polymers, decreased over time to a constant value. We also demonstrate that these materials are suitable for the preparation of the microstructures en route for light guiding applications. The fs laser-irradiated regions exhibited paramagnetic behavior as was confirmed from electron spin resonance studies through the formation of peroxide-type free radicals. Raman mapping was performed in the modified regions which consisted of defects and found that the modulations in intensity are predominant in the central portion of the structure compared to edges. Elemental analysis has been performed in the modified regions using field emission scanning electron microscope instrument and energy-dispersive X-ray absorption spectroscopy to estimate the percentage contents of individual elements which resulted in defect formation such as paramagnetic and optical centers.     

The Use of Derivative Thermogravimetry to Estimate Degree of Thermal Degradation

It is difficult to estimate the degree of thermal degradation which has taken place in complex parts composed of cellulosics and polymeric insulation unless complete failure has occurred. There is a definite need for a parameter which can quickly and easily measure the relative degree of thermal attack on organic insulation subjected to various known environmental and processing conditions. This paper reports preliminary work using derivative thermogravimetry to perform this function. Derivative thermogravimetric analysis (TGA) was used to produce a value, TGA Index, related to the peak height of the major TGA derivative signal. This TGA Index was found to correlate with the copper number of insulating paper measured after thermal degradation. The application of TGA Index to evaluation of polymer degradation after thermal shock, water absorption, and accelerated UV attack is also discussed. Finally, preliminary studies on the use of derivative TGA to evaluate coatings exposed to various outdoor environments around the country are reported.     

Simulation of mesogenic diruthenium tetracarboxylates: Development of a force field for coordination polymers of the MMX type

A classical molecular mechanics force field, able to simulate coordination polymers (CP) based on ruthenium carboxylates (Ru₂(O₂CR_eq)₄L_ax) (eq = equatorial group containing aliphatic chains, L_ax= axial ligand), has been developed. New parameters extracted from experimental data and quantum calculations on short aliphatic chains model systems were included in the generalized AMBER force field. The proposed parametrization was evaluated using model systems with known structure, containing either short or long aliphatic chains; experimental results were reproduced satisfactorily. This modified force field, although in a preliminary stage, could then be applied to long chain liquid crystalline compounds. The resulting atomistic simulations allowed assessing the relative influence of the factors determining the CP conformation, determinant for the physical properties of these materials. © 2013 Wiley Periodicals, Inc.     

Modern contaminants affecting microscopic residue analysis on stone tools: A word of caution

Residue analysis is a method frequently used to infer the function of stone tools and it is very often applied in combination with use-wear analysis. Beyond its undeniable potential, the method itself has several intrinsic constraints. Apart from the exceptional circumstances necessary for residues to survive, the correct identification of the residue type is a very debatable topic. Before attempting to recognise ancient residues, a proper method should allow analysts to identify possible modern contaminants and exclude them from the final interpretation. Therefore, analysts should not underestimate the presence of modern contaminants and might learn how to discriminate the background noise due to handling.The main aim of this research is to provide some methodological improvements to residue analysis through the characterisation of some modern residues often present on the surface of stone tools (e.g. skin flakes, modelling clay). This characterisation was done by using both optical light microscopy (OLM) and scanning electron microscopy (SEM).Finally, a special care in the post-excavation treatment of stone tools is claimed in order to avoid major contamination of the samples.     

Acoustic phonon impact on the inter-Coulombic decay process in charged quantum dot pairs

ABSTRACT

Recently, highly accurate multi-configuration time-dependent Hartree electron dynamics calculations demonstrated the efficient long-range energy transfer inter-Coulombic decay (ICD) process to happen in charged semiconductor quantum dot (QD) pairs. ICD is initiated by intraband photoexcitation of one of the QDs and leads to electron emission from the other within a duration of about 150 ps. On the same time scale electronically excited states are reported to relax due to the coupling of electrons to acoustic phonons. Likewise, phonons promote ionisation. Here, the QDs' acoustic breathing mode is implemented in a frozen-phonon approach. A detailed comparison of the phonon effects on electron relaxation and emission as well as on the full ICD process is presented, which supports the previous empirical finding of ICD being the dominant decay channel in paired QDs. In addition the relative importance of phonon–phonon, phonon–electron and electron–electron interaction is analysed.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

The optical properties of expanded liquid cesium

Abstract

The density dependence of the optical properties of expanded cesium has been investigated by means of reflectivity measurements in the range 0.5 – 4.0 eV. The dielectric functions ?₁ (ω) and ?₂(ω) have been derived by means of a modified Kramers-Kronig analysis. The data give useful information about the variation of the electronic structure of liquid cesium with large changes in density, large enough to reveal the existence of precursors of the metal-nonmental transition.     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

Analysis of the Chemical Composition of Red Pigments and Inks for the Characterization and Differentiation of Contemporary Prints

Prints are one of the most popular artistic forms. They consist of an original matrix that is printed on a paper support. The stamps are part of a series, and each series is composed of a particular number of prints. Many contemporary prints are made using oil inks and synthetic pigments (reds and yellows). Inks are mainly composed of pigments (organic or inorganic) and a binding medium. The analysis of inks has the potential to facilitate and complement the identification of stamps of different origins.

Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX) are techniques that are typically available in museums and centers related to the study of works of art. Both can be classified as micro-destructive and provide complementary information about the organic and some inorganic compounds (FTIR), and the elemental composition (SEM-EDX). In this article, the two techniques were used to analyze the composition of red ink in prints. As a result of these analyses, it was possible to distinguish among nearly all of the pigments and inks, indicating that the composition of the red ink can be reliably used to differentiate between stamps of different origins in a series of prints.