Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

热传导型半导体瞬态问题特征变网格有限元法及其分析

热传导型半导体器件的瞬时状态由四个方程的非线性偏微分方程组的初边值问题所决定，其中电子位势方程是椭圆型的，电子和空穴浓度方程是对流扩散型的，温度方程为热传导型的。本文提出解这类问题的特征变网格有限元法，并进行了理论分析，在一定条件下，得到了某种意义下的最佳L^2误差估计结果。     

热动力学问题的数值计算

 对含热传导的流体动力学方程组，用有限元方法进行数值求解。采用傅里叶热传导计算热流、用热流连续条件计算单元间接触面的温度、用三角形传热法计算体单元表面的热流，考虑各向同性弹塑性流体材料模型、三项式物态方程和导热系数与状态的相关性，给出了傅里叶热传导、接触传热、热应力应变效应、以及混合物冲击压缩特性等算例。对混合物冲击温度的数值模拟表明，小颗粒混合物在冲击压缩过程中，颗粒间的温度有差别、稍有波动，并随时间趋向于一致，以至热平衡。     

A Nonconforming Arbitrary Quadrilateral Finite Element Method for Approximating Maxwell's Equations

The main aim of this paper is to provide convergence analysis of Quasi-Wilson nonconforming finite element to Maxwell's equations under arbitrary quadrilateral meshes.The error estimates are derived,which are the same as those for conforming elements under conventional regular meshes.     

关于三维各向同性谐振子径向矩阵元计算的讨论

根据广义Laguerre多项式的数学性质，导出了较为简单的三维各向同性谐振子径向矩阵元的普遍公式,并在这基础上计算了一些重要特殊情形的径向矩阵元: 矢径r整数次幂的平均值，电偶极跃迁矩阵元和电四极跃迁矩阵元. 关键词： 三维各向同性谐振子 径向矩阵元 广义Laguerre多项式 偶极跃迁 四极跃迁     

Weighted extended b-splines for one-dimensional electromagnetic problems

This paper considers the weighted extended b-splines as basis function for finite element method in electromagnetics and compares with the standard finite element method applied to the two-point boundary value problems with different boundary conditions. This new approach, which provides more accurate results than standard finite element method, is presented to compare other numerical techniques and applied to one-dimensional electromagnetic problems. Computed results are compared with other numerical results in literature.     

一个非协调膜元的高精度分析

本文讨论一个四自由度三角形非协调膜元的整体超收敛性，外推和亏量校正。     

A parallel version of the preconditioned conjugate gradient method for boundary element equations

The parallel version of precondition techniques is developed for matrices arising from the Galerkin boundary element method for two-dimensional domains with Dirichlet boundary conditions. Results were obtained for implementations on a transputer network as well as on an nCUBE-2 parallel computer showing that iterative solution methods are very well suited for a MIMD computer. A comparison of numerical results for iterative and direct solution methods is presented and underlines the superiority of iterative methods for large systems.     

产生特殊聚焦图形的二元光学元件

通过面积编码将伽博（Gabor)波带片的透过率函数的余弦分布等效为二元分布，研制了能产生各种特殊聚焦图形的二元光学元件。根据透镜聚焦的物理原理制作的二元振幅型波带片可以方便地产生多种聚焦线，给出了相应的实验结果，并讨论了改善聚焦效果的优化条件。     

Mixed methods on quadrilaterals and hexahedra

We describe a new family of discrete spaces suitable for use with mixed methods on certain quadrilateral and hexahedral meshes. The new spaces are natural in the sense of differential geometry, so all the usual mixed method theory, including the hybrid formulation, carries over to these new elements with proofs unchanged. Because transforming general quadrilaterals into squares introduces nonlinearity and because mixed methods involve the divergence operator, the new spaces are more complicated than either the corresponding Raviart-Thomas spaces for rectangles or corresponding finite element spaces for quadrilaterals. The new spaces are also limited to meshes obtained from a rectangular mesh through the application of a single global bilinear transformation. Despite this limitation, the new elements may be useful in certain topologically regular problems, where initially rectangular grids are deformed to match features of the physical region. They also illustrate the difficulties introduced into the theory of mixed methods by nonlinear transformations.