Core/shell particles containing 3-(methacryloxypropyl)-trimethoxysilane in the shell: synthesis, characterization, and application

In comparison to the corresponding single-component counterparts, core/shell particles are widely used due to their better physical and chemical properties. The surface properties of core/shell particles evidently play an important role in the process of application. It is easy to deduce that surface properties mostly depend on the properties of the component in the shell. Therefore, desirable materials of shell are very significant for the study of composite materials, especially in core/shell field. It is well known that polysiloxane has excellent properties, such as the water repellency, high flexibility, low surface energy, and biocompatibility. Its application, however, is limited due to poor cohesiveness and poor film-forming properties. Recently, much endeavor has been made to overcome such flaws. It is found that polyacrylate is commonly considered for its good cohesiveness and excellent film-forming property. The combination of polysiloxane and polyacrylate has been shown to be important in the composite material field, especially as core/shell particles. Unfortunately, their hydrophobicity is considerably different and thus, the core/shell particles consisting of polyacrylate (PA)/polysiloxane (PSi) are hard to prepare by general seeded emulsion polymerization, and are also scarcely available in the literature. In this study, the new core/shell PA/PSi particles with poly(butyl methacrylate) (PA) as the core and poly(3-(methacryloxypropyl)-trimethoxysilane) (PSi) as the shell were prepared by dispersion polymerization under the kinetically controlled conditions. The characterization of the particles by TEM, DSC, particle size analyzer as well as static contact angle confirmed the formation of core/shell structure. The application of core/shell (PA/PSi) particles also has been considered and discussed here.TEM micrographs of core/shell (PA/PSi) particles.     

MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

Comparison of the effective core potential and model potential methods in studies of electron correlation energy in molecules: Dihalides and halogen hydrides

Summary The effective core potential and model potential methods were used in post-SCF calculations on HC1, HBr, Cl₂, and Br₂ in order to gain insight into the effect of insufficient representation of inner nodes in the valence orbitals of the approximate methods. The results show that while the correlation energy may be slightly overestimated (by 1–7%), both the electric moment functions and the quantities depending on energy differences are consistently similar for the methods studied and close to the results from all-electron calculations.Dedicated to Prof. Klaus Ruedenberg     

Mathematical model for the analytical signal of an herbicide sensor based on the reaction centre of Rhodobacter sphaeroides

This paper introduces a mathematical model which makes it possible both to determine the concentration of photosynthetic herbicides and to obtain a quantitative parameter in order to compare their activity using a previously described sensing system. The working principle involves the changes in absorption properties at 860 nm of the reaction centre (RC) isolated from the bacteria Rhodobacter sphaeroides when photosynthetic herbicides are present. The method has been used for the determination and activity comparison of five photosynthetic herbicides: diuron, atrazine, terbutryn, terbuthylazine and simazine. Detection limits obtained were 2.2, 0.75, 0.046, 0.25, and 1.4 μM, respectively. The resulting order for the different herbicides according to their action on RC was: terbutryn > terbuthylazine > atrazine > simazine > diuron.     

罗布麻纤维与丙烯酸酯类接枝共聚物结构和性能的研究

本文以氧化还原体系引发丙烯酸甲酯(MA)、丙烯酸乙酯(EA)、丙烯酸丁酯(BA)与罗布麻纤维的接枝共聚反应,用IR、SEM和X-射线衍射等手段表征了接枝纤维的结构。与纯罗布麻纤维相比较,接枝纤维具有较高的断裂伸长率和较低的杨氏模量,柔顺性增加;耐酸、碱能力随接枝率的增加而提高,但吸湿率不降。     

光学分析方法在DNA检测中的应用

介绍了用于DNA检测的各种光学分析方法及其原理,主要包括荧光法、化学发光法、光纤传感法、比色法、表面等离子共振法以及其他光学衍生方法。     

Anab initio investigation of Cu2Se and Cu4Se2

Summary Experimentally known copper selenium clusters show extraordinary geometrical features, especially short Cu-Cu distances. We report the first theoretical investigation of Cu₂Se and Cu₄Se₂. Various quantum chemical methods (SCF, MP2, CPF, CCSD, CCSD(T), LDF) are applied to determine the importance of dynamic electron correlation. We find that inclusion of correlation does not essentially change the electronic structure of the clusters but has a strong influence on geometries. To reduce the computational effort we apply effective core potentials (ECPs) in combination with small, but carefully optimized basis sets. The applicability of simple modellings of correlation energies for approximate inclusion of correlation effects in SCF geometry optimizations is tested.     

MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.     

The crystallographic structure of the natural air-hydrate in Greenland dye-3 deep ice core

We have carried out X-ray diffraction studies on single crystals of natural air-hydrate in deep ice cores recovered at Dye-3 Greenland. Integrated intensities for 470 diffracting planes were measured by an automated four-circle diffractometer. The space group determined is cubicFd3m and the lattice constant is 17.21(3) Å. These results indicate that the crystallographic structure is the Stackelberg's structure II, in contrast to the previously anticipated structure. This finding agrees with the recent results on the synthetic air-hydrate by Davidsonet al. It was also found by difference Fourier synthesis for guest molecules that electron density in a 16-hedral cage has multiple maxima displaced from the center of the cage while that in the 12-hedron was approximately spherical.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

核心素养为本的单元教学设计与实施——以“探究水的组成”为例

以“探究水的组成”教学为例，通过课标、教材及学习者分析，从认识角度、探究水平、认识水平等3个维度整体规划“身边的化学物质”主题单元目标学习进阶，明确“探究水的组成”课时目标，通过温故建模、据模探究、探究推理等3个阶段的教学实施，建立具体物质的研究思路模型，运用模型研究陌生物质（氢气），初步形成定量研究物质组成的能力。