Synthesis and Structure of Ba3La2（BO3）4 Crystal

1 INTRODUCTION At present the researches on more efficient solid-state laser materials become more important for the rapid development of diode-laser pumped solid-state laser. More researches have been devoted to the double borate compounds RX3(BO3)4 (R = Y, La, Gd and X = Y, Al, Sc), some of which exhibit good chemical and physical properties[1～10]. The rare earth and alkali-halide double borates M3Ln2(BO3)4 (M = Ca, Sr, Ba and Ln = LaLu and Y) were reported in literatures[11…     

A Procedure for Transforming Impedance Spectra for the Determination of Mechanism of Electrochemical Reactions

Transformation of impedance spectra into relaxation time spectra (RTS) is used for determining contributions of individual processes of the oxygen electroreduction reaction (OER) to the polarization resistance of the electrochemical cell. The transformation technique involves the solution of the convolution equation found with the aid of a modified Van Cittert iteration algorithm checked on model impedance spectra. The technique, when used to analyze impedance spectra of electrochemical cells air|Pt|YSZ|YSZ + Pt|air, shows that the conversion of a globular structure of the YSZ + Pt cermet layer to a columnar one is accompanied by a change of peak amplitudes in RTS. The revealed RTS dynamics when heated to 750°C is compared with peculiarities of individual processes in OER.     

双金属氰化物配合物的制备、表征及催化性能

 制备了基于钴氰化锌的双金属氰化物配合物（DMC）催化剂，并\r\n用元素分析、X射线衍射和红外光谱等手段进行了表征，考察了催化剂\r\n的结构与组成对其催化活性的影响以及该催化体系催化环氧烷烃开环聚\r\n合的特点．结果表明，含ZnCl2和叔丁醇的非晶态DMC催化剂具有最高的\r\n催化活性．该催化体系使聚合物的分子量可控，不饱和度很低（＜14μ\r\neq／g），逐步聚合所得到的聚合物的分子量分布较窄（Mn／Mw＜1．4\r\n8）．13CNMR分析结果表明，甲基氧丙环均聚物的链结构具有无规立构\r\n的特点，且链节分布几乎都为头－尾方式．IR分析结果表明，甲基氧丙\r\n环－环氧乙烷共聚物的链结构是无规分布的．     

1,3-丙二胺的不对称双Schiff碱异三核配合物的合成表征、晶体结构与磁性研究

合成了一种新的不对称双Schiff碱Cu(II)单核配合物Cu(HLt) (1) (H₃Lt为N-3-羧基水杨醛-N'-水杨醛-缩1,3-丙二胺)及其两个异三核配合物[(CuLt)₂Ni]•2.5H₂O (2)和[(CuLt)₂Mn]•5H₂O (3), 并用元素分析、红外光谱、电子光谱对它们进行了结构表征. 用X射线单晶衍射法测定了配合物3的晶体结构, 其晶胞中每个不对称单元包含一个异三核中性分子, 在此三核分子中, 中心Mn^2＋离子位于[O₆]的变形八面体配位环境中, 两个端基Cu^2＋离子位于[N₂O₂]的平面正方场中. 在5～300 K范围内测定了两个三核配合物的变温磁化率, 经拟合得化合物2的磁交换参数为－57.7 cm^－1, 化合物3的磁交换参数为－28.5 cm^－1, 表明在两个异三核配合物中, 中心M^2＋离子与外部Cu^2＋离子间存在弱的反铁磁自旋交换作用.     

N-Bromosuccinimide-dibenzoyl peroxide/azabisisobutyronitrile: a reagent for Z- to E-alkene isomerization

N-Bromosuccinimide-dibenzoyl peroxide/azobisisobutyronitrile is used to carry out several types of Z- to E-alkene isomerizations. The NBS-bromination conditions are sufficient for both allylic bromination and alkene isomerization. When the allylic hydrogens are not available in substrates, only the isomerization of the alkene takes place. The present conditions for isomerization of carbon-carbon double bonds are mild and efficient.     

Zur Reaktion von Makrozyklen mit Lanthanoiden. I. Die Struktur von [Li(thf)][(C22H22N4)2Ce] · THF

On the Reaction of Macrocycles with Lanthanoids. I. The Crystal Structure of [Li(thf)][(C₂₂H₂₂N₄)₂Ce] · THF In THF CeBr₃ forms with [(TMTAA)Li₂] the paramagnetic doubledecker complex [Li(thf)][(TMTAA)₂Ce]. The complex crystallizes with 1 Mol THF per formula unit. The structure was characterized by X-ray single crystal structure analysis (space group C2 (No. 5), z = 6, a = 1741.8(2) pm, b = 1622.1(2) pm, c = 2540.4(3) pm, β = 104.72(1)°). The sandwich-like arrangement of the heterocyclic ligands leads to a quadratic-prismatic coordination of the Ce³⁺ ion. One macrocyclic ligand is additionally coordinated by a [Li(thf)]⁺ fragment. The coordination of the Li ion is square pyramidal.     

Investigations of the thermal stability and phase transformations in the system marocco phosphorite—(NH4)3H(SO4)2.NH4HSO4

Different physical chemical methods were used to study the thermochemical processes in a system involving a natural phosphate and complex acid salts of ammonium sulphate. The products of decomposition of the double ammonium salt and the products of their interactions with the phosphate were identified. The formation of ammonium and calcium polyphosphates and the disproportionation of P₃O ₁₀ ^5? and P₂O ₇ ^4? to PO ₄ ^3? and PO ₃ ^? were found to depend on the circumstances of the thermal interactions.     

Predicting ion selectivity in water purification by capacitive deionization: Electric double layer models

Ion-selective water treatment is needed to address emerging problems in an energy- and cost-efficient manner. Capacitive deionization (CDI) is a membraneless water treatment technology, which relies on storing ions in charged electric double layers (EDLs) of micropores. CDI has shown remarkable selectivity, with local density approximations (LDAs) showing some success in guiding selective separations. However, many underlying processes are represented by lumped fitting parameters in LDA models, hindering further progress. Atomistic models help unravel selectivity mechanisms, but are difficult to integrate with cell-level CDI theory. Here, we review and extend LDA models for CDI, highlight a knowledge gap in connecting between LDA and atomistic models for CDI, and emphasize and build upon analogies between micropore EDLs and nanofiltration membranes.     

Excess Molar Volumes,Viscosities and Speeds of Sound of the Ternary Mixture 1-Heptanol (1) + Tetrachloroethylene (2) + Methylcyclohexane (3) at 298.15 K

Densities (ρ), viscosities (η) and speeds of sound (u) of the ternary mixture (1-heptanol + tetrachloroethylene + methylcyclohexane) and the corresponding binary mixtures (1-heptanol + tetrachloroethylene), (1-heptanol + methylcyclohexane) and (tetrachloroethylene + methylcyclohexane) at 298.15 K were measured over the whole composition range. The data obtained are used to calculate the excess molar volumes (V ^E), excess isobaric thermal expansivities (α ^E), viscosity deviations (Δη), excess Gibbs energies of activation of viscous flow (ΔG ^*E) and excess isentropic compressibilities (κ _S ^E) of the binary and ternary mixtures. The data from the binary systems were fitted by the Redlich–Kister equation whereas the best correlation method for the ternary system was found using the Nagata equation. Viscosities, speeds of sound and isentropic compressibilities of the binary and ternary mixtures have been correlated by means of several empirical and semi-empirical equations. The best correlation method for viscosities of binary systems is found using the Iulan et al. equation and for the ternary system using the Heric and McAllister equations. The best correlation method for the speeds of sound and isentropic compressibilities of the binary system (1-heptanol + methylcyclohexane) is found using IMR (Van Deal ideal mixing relation) and for the binary system (tetrachloroethylene + methylcyclohexane) it is found using the NR (Nomoto relation) and for the binary system (1-heptanol + tetrachloroethylene) and the ternary system (1-heptanol + trichloroethylene + methylcyclohexane) it is obtained from the FLT (Jacobson free length theory).     

Thermodynamic interactions in binary mixtures of anisole with ethanol, propan-1-ol, propan-2-ol, butan-1-ol, pentan-1-ol, and 3-methylbutan-1-ol at T = (298.15, 303.15, and 308.15) K

In this paper, excess thermodynamic functions have been computed from the measured values of density, viscosity, and refractive index at T = (298.15, 303.15, and 308.15) K, ultrasonic velocity at T = 298.15 K over the entire mixture composition range of (anisole with ethanol, propan-1-ol, propan-2-ol, butan-1-ol, pentan-1-ol, or 3-methyl butan-1-ol). Excess molar volume, V^E has been calculated from densities, whereas deviations in viscosity, Δη, were computed from the measured viscosities. From ultrasonic velocities, isentropic compressibilities were calculated, from which deviations in isentropic compressibility, Δk_s have been computed. Lorenz-Lorentz mixture rule was used to compute molar refractivity, R from refractivity index data and from these data, deviations in molar refractivity, ΔR have been computed. Computed thermodynamic quantities have been fitted to Redlich and Kister polynomial equation to derive the coefficients and standard errors between experimental and predicted quantities. Intermolecular interactions between anisole and alkanols have been studied based on the computed excess thermodynamic quantities.